Re: [PATCH 0/3] clk: meson: clk-pll driver update

[Martin Blumenstingl]

Hi Jerome,

On Tue, Jul 17, 2018 at 11:56 AM Jerome Brunet <jbrunet@xxxxxxxxxxxx> wrote:
>
> This patchset is yet another round of update to the amlogic pll driver.
>
>  1) Enable bit is added so we don't rely on the bootloader or the init
>     value to enable to pll device.
>  2) OD post dividers are removed from the pll driver. This simplify the
>     driver and let us provide the clocks which exist between those
>     dividera. Some device are actually using these clocks.
>  3) The rates hard coded in parameter tables are remove. Instead, we
>     only rely on the parent rate and the parameters to calculate the
>     output rate, which is a lot better.
>
> This series has been tested on the gxl libretech cc and axg s400.
> I did not test it on meson8b yet.
I had some comments on patch #2
once that is fixed I can help testing on Meson8b (if you give me a few days...)


Regards
Martin