[PATCH 1/5] pinctrl: actions: define constructor generic to Actions Semi SoC's
From: Saravanan Sekar
Date: Sun Jul 22 2018 - 12:36:27 EST
Existing constructor defined in S900 is reused generic
for all Actions Semi SoC's.
Signed-off-by: Parthiban Nallathambi <pn@xxxxxxx>
Signed-off-by: Saravanan Sekar <sravanhome@xxxxxxxxx>
---
drivers/pinctrl/actions/pinctrl-owl.h | 124 +++++++++++++++++++++++++
drivers/pinctrl/actions/pinctrl-s900.c | 122 ------------------------
2 files changed, 124 insertions(+), 122 deletions(-)
diff --git a/drivers/pinctrl/actions/pinctrl-owl.h b/drivers/pinctrl/actions/pinctrl-owl.h
index 74342378937c..42635366e68f 100644
--- a/drivers/pinctrl/actions/pinctrl-owl.h
+++ b/drivers/pinctrl/actions/pinctrl-owl.h
@@ -15,6 +15,130 @@
#define OWL_PINCONF_SLEW_SLOW 0
#define OWL_PINCONF_SLEW_FAST 1
+#define OWL_GPIO_PORT_A 0
+#define OWL_GPIO_PORT_B 1
+#define OWL_GPIO_PORT_C 2
+#define OWL_GPIO_PORT_D 3
+#define OWL_GPIO_PORT_E 4
+#define OWL_GPIO_PORT_F 5
+
+#define MUX_PG(group_name, reg, shift, width) \
+ { \
+ .name = #group_name, \
+ .pads = group_name##_pads, \
+ .npads = ARRAY_SIZE(group_name##_pads), \
+ .funcs = group_name##_funcs, \
+ .nfuncs = ARRAY_SIZE(group_name##_funcs), \
+ .mfpctl_reg = MFCTL##reg, \
+ .mfpctl_shift = shift, \
+ .mfpctl_width = width, \
+ .drv_reg = -1, \
+ .drv_shift = -1, \
+ .drv_width = -1, \
+ .sr_reg = -1, \
+ .sr_shift = -1, \
+ .sr_width = -1, \
+ }
+
+#define DRV_PG(group_name, reg, shift, width) \
+ { \
+ .name = #group_name, \
+ .pads = group_name##_pads, \
+ .npads = ARRAY_SIZE(group_name##_pads), \
+ .mfpctl_reg = -1, \
+ .mfpctl_shift = -1, \
+ .mfpctl_width = -1, \
+ .drv_reg = PAD_DRV##reg, \
+ .drv_shift = shift, \
+ .drv_width = width, \
+ .sr_reg = -1, \
+ .sr_shift = -1, \
+ .sr_width = -1, \
+ }
+
+#define SR_PG(group_name, reg, shift, width) \
+ { \
+ .name = #group_name, \
+ .pads = group_name##_pads, \
+ .npads = ARRAY_SIZE(group_name##_pads), \
+ .mfpctl_reg = -1, \
+ .mfpctl_shift = -1, \
+ .mfpctl_width = -1, \
+ .drv_reg = -1, \
+ .drv_shift = -1, \
+ .drv_width = -1, \
+ .sr_reg = PAD_SR##reg, \
+ .sr_shift = shift, \
+ .sr_width = width, \
+ }
+
+#define OWL_GPIO_PORT(port, base, count, _outen, _inen, _dat) \
+ [OWL_GPIO_PORT_##port] = { \
+ .offset = base, \
+ .pins = count, \
+ .outen = _outen, \
+ .inen = _inen, \
+ .dat = _dat, \
+ }
+
+#define FUNCTION(fname) \
+ { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+/* PAD PULL UP/DOWN CONFIGURES */
+#define PULLCTL_CONF(pull_reg, pull_sft, pull_wdt) \
+ { \
+ .reg = PAD_PULLCTL##pull_reg, \
+ .shift = pull_sft, \
+ .width = pull_wdt, \
+ }
+
+#define PAD_PULLCTL_CONF(pad_name, pull_reg, pull_sft, pull_wdt) \
+ struct owl_pullctl pad_name##_pullctl_conf \
+ = PULLCTL_CONF(pull_reg, pull_sft, pull_wdt)
+
+#define ST_CONF(st_reg, st_sft, st_wdt) \
+ { \
+ .reg = PAD_ST##st_reg, \
+ .shift = st_sft, \
+ .width = st_wdt, \
+ }
+
+#define PAD_ST_CONF(pad_name, st_reg, st_sft, st_wdt) \
+ struct owl_st pad_name##_st_conf \
+ = ST_CONF(st_reg, st_sft, st_wdt)
+
+#define PAD_INFO(name) \
+ { \
+ .pad = name, \
+ .pullctl = NULL, \
+ .st = NULL, \
+ }
+
+#define PAD_INFO_ST(name) \
+ { \
+ .pad = name, \
+ .pullctl = NULL, \
+ .st = &name##_st_conf, \
+ }
+
+#define PAD_INFO_PULLCTL(name) \
+ { \
+ .pad = name, \
+ .pullctl = &name##_pullctl_conf, \
+ .st = NULL, \
+ }
+
+#define PAD_INFO_PULLCTL_ST(name) \
+ { \
+ .pad = name, \
+ .pullctl = &name##_pullctl_conf, \
+ .st = &name##_st_conf, \
+ }
+
enum owl_pinconf_pull {
OWL_PINCONF_PULL_HIZ,
OWL_PINCONF_PULL_DOWN,
diff --git a/drivers/pinctrl/actions/pinctrl-s900.c b/drivers/pinctrl/actions/pinctrl-s900.c
index 5503c7945764..baa2f4847418 100644
--- a/drivers/pinctrl/actions/pinctrl-s900.c
+++ b/drivers/pinctrl/actions/pinctrl-s900.c
@@ -33,13 +33,6 @@
#define PAD_SR1 (0x0274)
#define PAD_SR2 (0x0278)
-#define OWL_GPIO_PORT_A 0
-#define OWL_GPIO_PORT_B 1
-#define OWL_GPIO_PORT_C 2
-#define OWL_GPIO_PORT_D 3
-#define OWL_GPIO_PORT_E 4
-#define OWL_GPIO_PORT_F 5
-
#define _GPIOA(offset) (offset)
#define _GPIOB(offset) (32 + (offset))
#define _GPIOC(offset) (64 + (offset))
@@ -892,55 +885,6 @@ static unsigned int i2c2_sr_pads[] = { I2C2_SCLK, I2C2_SDATA };
static unsigned int sensor0_sr_pads[] = { SENSOR0_PCLK,
SENSOR0_CKOUT };
-#define MUX_PG(group_name, reg, shift, width) \
- { \
- .name = #group_name, \
- .pads = group_name##_pads, \
- .npads = ARRAY_SIZE(group_name##_pads), \
- .funcs = group_name##_funcs, \
- .nfuncs = ARRAY_SIZE(group_name##_funcs), \
- .mfpctl_reg = MFCTL##reg, \
- .mfpctl_shift = shift, \
- .mfpctl_width = width, \
- .drv_reg = -1, \
- .drv_shift = -1, \
- .drv_width = -1, \
- .sr_reg = -1, \
- .sr_shift = -1, \
- .sr_width = -1, \
- }
-
-#define DRV_PG(group_name, reg, shift, width) \
- { \
- .name = #group_name, \
- .pads = group_name##_pads, \
- .npads = ARRAY_SIZE(group_name##_pads), \
- .mfpctl_reg = -1, \
- .mfpctl_shift = -1, \
- .mfpctl_width = -1, \
- .drv_reg = PAD_DRV##reg, \
- .drv_shift = shift, \
- .drv_width = width, \
- .sr_reg = -1, \
- .sr_shift = -1, \
- .sr_width = -1, \
- }
-
-#define SR_PG(group_name, reg, shift, width) \
- { \
- .name = #group_name, \
- .pads = group_name##_pads, \
- .npads = ARRAY_SIZE(group_name##_pads), \
- .mfpctl_reg = -1, \
- .mfpctl_shift = -1, \
- .mfpctl_width = -1, \
- .drv_reg = -1, \
- .drv_shift = -1, \
- .drv_width = -1, \
- .sr_reg = PAD_SR##reg, \
- .sr_shift = shift, \
- .sr_width = width, \
- }
/* Pinctrl groups */
static const struct owl_pingroup s900_groups[] = {
@@ -1442,13 +1386,6 @@ static const char * const sirq2_groups[] = {
"sirq2_dummy",
};
-#define FUNCTION(fname) \
- { \
- .name = #fname, \
- .groups = fname##_groups, \
- .ngroups = ARRAY_SIZE(fname##_groups), \
- }
-
static const struct owl_pinmux_func s900_functions[] = {
[S900_MUX_ERAM] = FUNCTION(eram),
[S900_MUX_ETH_RMII] = FUNCTION(eth_rmii),
@@ -1500,28 +1437,6 @@ static const struct owl_pinmux_func s900_functions[] = {
[S900_MUX_SIRQ1] = FUNCTION(sirq1),
[S900_MUX_SIRQ2] = FUNCTION(sirq2)
};
-/* PAD PULL UP/DOWN CONFIGURES */
-#define PULLCTL_CONF(pull_reg, pull_sft, pull_wdt) \
- { \
- .reg = PAD_PULLCTL##pull_reg, \
- .shift = pull_sft, \
- .width = pull_wdt, \
- }
-
-#define PAD_PULLCTL_CONF(pad_name, pull_reg, pull_sft, pull_wdt) \
- struct owl_pullctl pad_name##_pullctl_conf \
- = PULLCTL_CONF(pull_reg, pull_sft, pull_wdt)
-
-#define ST_CONF(st_reg, st_sft, st_wdt) \
- { \
- .reg = PAD_ST##st_reg, \
- .shift = st_sft, \
- .width = st_wdt, \
- }
-
-#define PAD_ST_CONF(pad_name, st_reg, st_sft, st_wdt) \
- struct owl_st pad_name##_st_conf \
- = ST_CONF(st_reg, st_sft, st_wdt)
/* PAD_PULLCTL0 */
static PAD_PULLCTL_CONF(ETH_RXER, 0, 18, 2);
@@ -1639,34 +1554,6 @@ static PAD_ST_CONF(SPI0_SS, 1, 2, 1);
static PAD_ST_CONF(I2S_BCLK0, 1, 1, 1);
static PAD_ST_CONF(I2S_MCLK0, 1, 0, 1);
-#define PAD_INFO(name) \
- { \
- .pad = name, \
- .pullctl = NULL, \
- .st = NULL, \
- }
-
-#define PAD_INFO_ST(name) \
- { \
- .pad = name, \
- .pullctl = NULL, \
- .st = &name##_st_conf, \
- }
-
-#define PAD_INFO_PULLCTL(name) \
- { \
- .pad = name, \
- .pullctl = &name##_pullctl_conf, \
- .st = NULL, \
- }
-
-#define PAD_INFO_PULLCTL_ST(name) \
- { \
- .pad = name, \
- .pullctl = &name##_pullctl_conf, \
- .st = &name##_st_conf, \
- }
-
/* Pad info table */
static struct owl_padinfo s900_padinfo[NUM_PADS] = {
[ETH_TXD0] = PAD_INFO_ST(ETH_TXD0),
@@ -1821,15 +1708,6 @@ static struct owl_padinfo s900_padinfo[NUM_PADS] = {
[SGPIO3] = PAD_INFO_PULLCTL_ST(SGPIO3)
};
-#define OWL_GPIO_PORT(port, base, count, _outen, _inen, _dat) \
- [OWL_GPIO_PORT_##port] = { \
- .offset = base, \
- .pins = count, \
- .outen = _outen, \
- .inen = _inen, \
- .dat = _dat, \
- }
-
static const struct owl_gpio_port s900_gpio_ports[] = {
OWL_GPIO_PORT(A, 0x0000, 32, 0x0, 0x4, 0x8),
OWL_GPIO_PORT(B, 0x000C, 32, 0x0, 0x4, 0x8),
--
2.18.0