[PATCH 3/4] ia64: use mem_data to detect nodes' minimal and maximal PFNs

[Mike Rapoport]

When EFI memory map is traversed to determine the extents of each node, the
minimal and maximal PFNs are stored in the bootmem_data structures. The
same information ls later stored in the mem_data array of 'struct
early_node_data'.

Switch to using mem_data from the very beginning.

Signed-off-by: Mike Rapoport <rppt@xxxxxxxxxxxxxxxxxx>
---
 arch/ia64/mm/discontig.c | 60 +++++++++++-------------------------------------
 1 file changed, 14 insertions(+), 46 deletions(-)

diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 6148ea8..8e99d8e 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -57,33 +57,31 @@ pg_data_t *pgdat_list[MAX_NUMNODES];
 	     (((node)*PERCPU_PAGE_SIZE) & (MAX_NODE_ALIGN_OFFSET - 1)))
 
 /**
- * build_node_maps - callback to setup bootmem structs for each node
+ * build_node_maps - callback to setup mem_data structs for each node
  * @start: physical start of range
  * @len: length of range
  * @node: node where this range resides
  *
- * We allocate a struct bootmem_data for each piece of memory that we wish to
+ * Detect extents of each piece of memory that we wish to
  * treat as a virtually contiguous block (i.e. each node). Each such block
  * must start on an %IA64_GRANULE_SIZE boundary, so we round the address down
  * if necessary.  Any non-existent pages will simply be part of the virtual
- * memmap.  We also update min_low_pfn and max_low_pfn here as we receive
- * memory ranges from the caller.
+ * memmap.
  */
 static int __init build_node_maps(unsigned long start, unsigned long len,
 				  int node)
 {
 	unsigned long spfn, epfn, end = start + len;
-	struct bootmem_data *bdp = &bootmem_node_data[node];
 
 	epfn = GRANULEROUNDUP(end) >> PAGE_SHIFT;
 	spfn = GRANULEROUNDDOWN(start) >> PAGE_SHIFT;
 
-	if (!bdp->node_low_pfn) {
-		bdp->node_min_pfn = spfn;
-		bdp->node_low_pfn = epfn;
+	if (!mem_data[node].min_pfn) {
+		mem_data[node].min_pfn = spfn;
+		mem_data[node].max_pfn = epfn;
 	} else {
-		bdp->node_min_pfn = min(spfn, bdp->node_min_pfn);
-		bdp->node_low_pfn = max(epfn, bdp->node_low_pfn);
+		mem_data[node].min_pfn = min(spfn, mem_data[node].min_pfn);
+		mem_data[node].max_pfn = max(epfn, mem_data[node].max_pfn);
 	}
 
 	return 0;
@@ -323,19 +321,18 @@ static int __init find_pernode_space(unsigned long start, unsigned long len,
 {
 	unsigned long spfn, epfn;
 	unsigned long pernodesize = 0, pernode, pages, mapsize;
-	struct bootmem_data *bdp = &bootmem_node_data[node];
 
 	spfn = start >> PAGE_SHIFT;
 	epfn = (start + len) >> PAGE_SHIFT;
 
-	pages = bdp->node_low_pfn - bdp->node_min_pfn;
+	pages = mem_data[node].max_pfn - mem_data[node].min_pfn;
 	mapsize = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
 
 	/*
 	 * Make sure this memory falls within this node's usable memory
 	 * since we may have thrown some away in build_maps().
 	 */
-	if (spfn < bdp->node_min_pfn || epfn > bdp->node_low_pfn)
+	if (spfn < mem_data[node].min_pfn || epfn > mem_data[node].max_pfn)
 		return 0;
 
 	/* Don't setup this node's local space twice... */
@@ -397,7 +394,7 @@ static void __init reserve_pernode_space(void)
 		bdp = pdp->bdata;
 
 		/* First the bootmem_map itself */
-		pages = bdp->node_low_pfn - bdp->node_min_pfn;
+		pages = mem_data[node].max_pfn - mem_data[node].min_pfn;
 		size = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
 		base = __pa(bdp->node_bootmem_map);
 		reserve_bootmem_node(pdp, base, size, BOOTMEM_DEFAULT);
@@ -541,10 +538,8 @@ void __init find_memory(void)
 	efi_memmap_walk(find_max_min_low_pfn, NULL);
 
 	for_each_online_node(node)
-		if (bootmem_node_data[node].node_low_pfn) {
+		if (mem_data[node].min_pfn)
 			node_clear(node, memory_less_mask);
-			mem_data[node].min_pfn = ~0UL;
-		}
 
 	efi_memmap_walk(filter_memory, register_active_ranges);
 
@@ -568,8 +563,8 @@ void __init find_memory(void)
 
 		init_bootmem_node(pgdat_list[node],
 				  map>>PAGE_SHIFT,
-				  bdp->node_min_pfn,
-				  bdp->node_low_pfn);
+				  mem_data[node].min_pfn,
+				  mem_data[node].max_pfn);
 	}
 
 	efi_memmap_walk(filter_rsvd_memory, free_node_bootmem);
@@ -652,31 +647,6 @@ void call_pernode_memory(unsigned long start, unsigned long len, void *arg)
 }
 
 /**
- * count_node_pages - callback to build per-node memory info structures
- * @start: physical start of range
- * @len: length of range
- * @node: node where this range resides
- *
- * Each node has it's own number of physical pages, DMAable pages, start, and
- * end page frame number.  This routine will be called by call_pernode_memory()
- * for each piece of usable memory and will setup these values for each node.
- * Very similar to build_maps().
- */
-static __init int count_node_pages(unsigned long start, unsigned long len, int node)
-{
-	unsigned long end = start + len;
-
-	start = GRANULEROUNDDOWN(start);
-	end = GRANULEROUNDUP(end);
-	mem_data[node].max_pfn = max(mem_data[node].max_pfn,
-				     end >> PAGE_SHIFT);
-	mem_data[node].min_pfn = min(mem_data[node].min_pfn,
-				     start >> PAGE_SHIFT);
-
-	return 0;
-}
-
-/**
  * paging_init - setup page tables
  *
  * paging_init() sets up the page tables for each node of the system and frees
@@ -692,8 +662,6 @@ void __init paging_init(void)
 
 	max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
 
-	efi_memmap_walk(filter_rsvd_memory, count_node_pages);
-
 	sparse_memory_present_with_active_regions(MAX_NUMNODES);
 	sparse_init();
 
-- 
2.7.4