[PATCH v2 16/17] driver/edac: enable Hygon support to AMD64 EDAC driver

[Pu Wen]

To make AMD64 MCE and EDAC drivers working on Hygon platforms, add Hygon
vendor check for them. Also Hygon PCI Device ID DF_F0/DF_F6(0x1460/0x1466)
of Host bridge is needed for these drivers. And support Dhyana processors
by using AMD 0x17 codes.

Signed-off-by: Pu Wen <puwen@xxxxxxxx>
---
 drivers/edac/amd64_edac.c | 20 +++++++++++++++++++-
 drivers/edac/amd64_edac.h |  4 ++++
 drivers/edac/mce_amd.c    |  4 +++-
 3 files changed, 26 insertions(+), 2 deletions(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 18aeabb..d8b4b0e 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -211,7 +211,7 @@ static int __set_scrub_rate(struct amd64_pvt *pvt, u32 new_bw, u32 min_rate)
 
 	scrubval = scrubrates[i].scrubval;
 
-	if (pvt->fam == 0x17) {
+	if (pvt->fam == 0x17 || pvt->fam == 0x18) {
 		__f17h_set_scrubval(pvt, scrubval);
 	} else if (pvt->fam == 0x15 && pvt->model == 0x60) {
 		f15h_select_dct(pvt, 0);
@@ -264,6 +264,7 @@ static int get_scrub_rate(struct mem_ctl_info *mci)
 		break;
 
 	case 0x17:
+	case 0x18:
 		amd64_read_pci_cfg(pvt->F6, F17H_SCR_BASE_ADDR, &scrubval);
 		if (scrubval & BIT(0)) {
 			amd64_read_pci_cfg(pvt->F6, F17H_SCR_LIMIT_ADDR, &scrubval);
@@ -1044,6 +1045,7 @@ static void determine_memory_type(struct amd64_pvt *pvt)
 		goto ddr3;
 
 	case 0x17:
+	case 0x18:
 		if ((pvt->umc[0].dimm_cfg | pvt->umc[1].dimm_cfg) & BIT(5))
 			pvt->dram_type = MEM_LRDDR4;
 		else if ((pvt->umc[0].dimm_cfg | pvt->umc[1].dimm_cfg) & BIT(4))
@@ -2200,6 +2202,16 @@ static struct amd64_family_type family_types[] = {
 			.dbam_to_cs		= f17_base_addr_to_cs_size,
 		}
 	},
+	[HYGON_F18_CPUS] = {
+		/* Hygon F18h uses the same AMD F17h support */
+		.ctl_name = "Hygon_F18h",
+		.f0_id = PCI_DEVICE_ID_HYGON_18H_DF_F0,
+		.f6_id = PCI_DEVICE_ID_HYGON_18H_DF_F6,
+		.ops = {
+			.early_channel_count	= f17_early_channel_count,
+			.dbam_to_cs		= f17_base_addr_to_cs_size,
+		}
+	},
 };
 
 /*
@@ -3192,6 +3204,11 @@ static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt)
 		pvt->ops	= &family_types[F17_CPUS].ops;
 		break;
 
+	case 0x18:
+		fam_type	= &family_types[HYGON_F18_CPUS];
+		pvt->ops	= &family_types[HYGON_F18_CPUS].ops;
+		break;
+
 	default:
 		amd64_err("Unsupported family!\n");
 		return NULL;
@@ -3428,6 +3445,7 @@ static const struct x86_cpu_id amd64_cpuids[] = {
 	{ X86_VENDOR_AMD, 0x15, X86_MODEL_ANY,	X86_FEATURE_ANY, 0 },
 	{ X86_VENDOR_AMD, 0x16, X86_MODEL_ANY,	X86_FEATURE_ANY, 0 },
 	{ X86_VENDOR_AMD, 0x17, X86_MODEL_ANY,	X86_FEATURE_ANY, 0 },
+	{ X86_VENDOR_HYGON, 0x18, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(x86cpu, amd64_cpuids);
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 1d4b74e..6e5f609 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -116,6 +116,9 @@
 #define PCI_DEVICE_ID_AMD_17H_DF_F0	0x1460
 #define PCI_DEVICE_ID_AMD_17H_DF_F6	0x1466
 
+#define PCI_DEVICE_ID_HYGON_18H_DF_F0	0x1460
+#define PCI_DEVICE_ID_HYGON_18H_DF_F6	0x1466
+
 /*
  * Function 1 - Address Map
  */
@@ -281,6 +284,7 @@ enum amd_families {
 	F16_CPUS,
 	F16_M30H_CPUS,
 	F17_CPUS,
+	HYGON_F18_CPUS,
 	NUM_FAMILIES,
 };
 
diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
index 2ab4d61..c605089 100644
--- a/drivers/edac/mce_amd.c
+++ b/drivers/edac/mce_amd.c
@@ -1059,7 +1059,8 @@ static int __init mce_amd_init(void)
 {
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 
-	if (c->x86_vendor != X86_VENDOR_AMD)
+	if (c->x86_vendor != X86_VENDOR_AMD &&
+	    c->x86_vendor != X86_VENDOR_HYGON)
 		return -ENODEV;
 
 	fam_ops = kzalloc(sizeof(struct amd_decoder_ops), GFP_KERNEL);
@@ -1113,6 +1114,7 @@ static int __init mce_amd_init(void)
 		break;
 
 	case 0x17:
+	case 0x18:
 		xec_mask = 0x3f;
 		if (!boot_cpu_has(X86_FEATURE_SMCA)) {
 			printk(KERN_WARNING "Decoding supported only on Scalable MCA processors.\n");
-- 
2.7.4