Re: [PATCH v2 4/4] arm: dts: ls1021a: Enable I2C DMA support

[Uwe Kleine-König]

Hello,

expanding Cc a bit to include Shawn and the kernel teams of Pengutronix
and NXP.

On Mon, Jul 09, 2018 at 11:43:04AM +0200, Esben Haabendal wrote:
> From: Esben Haabendal <eha@xxxxxxxx>
> 
> Gives substantial performance improvement for transfers larger than 16
> bytes (DMA_THRESHOLD).  Smaller transfers are unaffected.
> 
> Signed-off-by: Esben Haabendal <eha@xxxxxxxx>
> ---
>  arch/arm/boot/dts/ls1021a.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index c55d479971cc..1e5640701c65 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -363,6 +363,8 @@
>  			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "i2c";
>  			clocks = <&clockgen 4 1>;
> +			dma-names = "tx", "rx";
> +			dmas = <&edma0 1 39>, <&edma0 1 38>;
>  			status = "disabled";
>  		};
>  
> @@ -374,6 +376,8 @@
>  			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "i2c";
>  			clocks = <&clockgen 4 1>;
> +			dma-names = "tx", "rx";
> +			dmas = <&edma0 1 37>, <&edma0 1 36>;
>  			status = "disabled";
>  		};
>  
> @@ -385,6 +389,8 @@
>  			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "i2c";
>  			clocks = <&clockgen 4 1>;
> +			dma-names = "tx", "rx";
> +			dmas = <&edma0 1 35>, <&edma0 1 34>;
>  			status = "disabled";
>  		};

This is a bit orthogonal to the other changes in this series and needs
at least an ack from Shawn. Looks ok in my eyes.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |