[PATCH 04/10] mmc: tegra: Disable card clock during pad calibration

[Aapo Vienamo]

Disable the card clock during automatic pad drive strength calibration
and re-enable it aftewards.

Signed-off-by: Aapo Vienamo <avienamo@xxxxxxxxxx>
---
 drivers/mmc/host/sdhci-tegra.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 61067b7..0de74f4 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -52,6 +52,7 @@
 #define SDHCI_TEGRA_SDMEM_COMP_PADCTRL			0x1e0
 #define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_MASK	0x0000000f
 #define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_VAL	0x7
+#define SDHCI_TEGRA_PAD_E_INPUT_OR_E_PWRD		BIT(31)
 
 #define SDHCI_TEGRA_AUTO_CAL_STATUS     0x1ec
 #define SDHCI_TEGRA_AUTO_CAL_ACTIVE     BIT(31)
@@ -226,11 +227,35 @@ static void tegra_sdhci_configure_cal_pad(struct sdhci_host *host, bool enable)
 	udelay(1);
 }
 
+static bool tegra_sdhci_configure_card_clk(struct sdhci_host *host, bool enable)
+{
+	bool orig_enabled;
+	u32 reg;
+
+	reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+	orig_enabled = reg & SDHCI_CLOCK_CARD_EN;
+
+	if (orig_enabled == enable)
+		return orig_enabled;
+
+	if (enable)
+		reg |= SDHCI_CLOCK_CARD_EN;
+	else
+		reg &= ~SDHCI_CLOCK_CARD_EN;
+
+	sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+	return orig_enabled;
+}
+
 static void tegra_sdhci_pad_autocalib(struct sdhci_host *host)
 {
 	unsigned timeout = 10;
+	bool card_clk_enabled;
 	u32 reg;
 
+	card_clk_enabled = tegra_sdhci_configure_card_clk(host, false);
+
 	tegra_sdhci_configure_cal_pad(host, true);
 
 	reg = sdhci_readl(host, SDHCI_TEGRA_AUTO_CAL_CONFIG);
@@ -248,6 +273,8 @@ static void tegra_sdhci_pad_autocalib(struct sdhci_host *host)
 
 	tegra_sdhci_configure_cal_pad(host, false);
 
+	tegra_sdhci_configure_card_clk(host, card_clk_enabled);
+
 	if (timeout == 0)
 		dev_err(mmc_dev(host->mmc), "Pad autocal timed out\n");
 }
-- 
2.7.4