[RESEND PATCH v4 2/2] eeprom: at24: Add support for address-width property

[alanx . chiang]

From: Alan Chiang <alanx.chiang@xxxxxxxxx>

Provide a flexible way to determine the addressing bits of eeprom.
Pass the addressing bits to driver through address-width property.

Signed-off-by: Alan Chiang <alanx.chiang@xxxxxxxxx>
Signed-off-by: Andy Yeh <andy.yeh@xxxxxxxxx>
---
 drivers/misc/eeprom/at24.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 0c125f2..7ea640b 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -478,6 +478,23 @@ static void at24_properties_to_pdata(struct device *dev,
 	if (device_property_present(dev, "no-read-rollover"))
 		chip->flags |= AT24_FLAG_NO_RDROL;
 
+	err = device_property_read_u32(dev, "address-width", &val);
+	if (!err) {
+		switch (val) {
+		case 8:
+			if (chip->flags & AT24_FLAG_ADDR16)
+				dev_warn(dev, "Override address width to be 8, while default is 16\n");
+			chip->flags &= ~AT24_FLAG_ADDR16;
+			break;
+		case 16:
+			chip->flags |= AT24_FLAG_ADDR16;
+			break;
+		default:
+			dev_warn(dev, "Bad \"address-width\" property: %u\n",
+				 val);
+		}
+	}
+
 	err = device_property_read_u32(dev, "size", &val);
 	if (!err)
 		chip->byte_len = val;
-- 
2.7.4