[PATCH 1/2] mmc: tmio: rename files and CONFIG options to have the same prefix

[Masahiro Yamada]

As commit b6147490e6aa ("mmc: tmio: split core functionality, DMA and
MFD glue") said, these MMC controllers use the IP from Panasonic.

TMIO (Toshiba Mobile IO) MMC was the first upstreamed user of this IP.
The common driver code was split and expanded as 'tmio-mmc-core', then
it become historical misnomer since 'tmio' is not the name of this IP.

I pointed out this [1], and suggested to re-organize the names in the
form of:

  <IP-name>.c            (common code for this IP)
  <IP-name>_tmio.c       (Toshiba Mobile IO)
  <IP-name>_sdhi.c       (Renesas SDHI)
  <IP-name>_uniphier.c   (Socionext UniPhier)

The <IP-name> in my mind was 'mnsd' because names of Panasonic chips
are prefixed with 'MN'.

This is the naming scheme as we see in dw_mmc* and sdhci-*.

In the discussion with Wolfram Sang, my suggestion was rejected
because it implied drastic function renaming, which is too invasive.

Ulf Hansson was still happy with file renaming to clarify the
relationship between variants.  So, the accepted solution was:

 - Make 'tmio_mmc' the _right_ core name
 - Align all variant files with the same prefix.
 - Do not rename functions

This commit renames files as follows:

  tmio_mmc_core.c              -> tmio_mmc.c
  tmio_mmc.c                   -> tmio_mmc_original.c
  renesas_sdhi_core.c          -> tmio_mmc_sdhi.c
  renesas_sdhi.h               -> tmio_mmc_sdhi.h
  renesas_sdhi_internal_dmac.c -> tmio_mmc_sdhi_internal_dmac.c
  renesas_sdhi_sys_dmac.c      -> tmio_mmc_sdhi_sys_dmac.c

Also rename CONFIG options to match to the file names:

  MMC_TMIO_CORE          -> MMC_TMIO
  MMC_TMIO               -> MMC_TMIO_ORIGINAL
  MMC_SDHI               -> MMC_TMIO_SDHI
  MMC_SDHI_SYS_DMAC      -> MMC_TMIO_SDHI_SYS_DMAC
  MMC_SDHI_INTERNAL_DMAC -> MMC_TMIO_SDHI_INTERNAL_DMAC

I touched eseries_pxa_defconfig and pxa_defconfig in this commit
because they are inactive, but renaming of CONFIG options generally
takes some development cycles.  Old names will be kept until the
migration is completed, like Renesas folks did when they renamed
ARCH_SHMOBILE_MULTI to ARCH_RENESAS.

[1] https://www.spinics.net/lists/linux-mmc/msg46952.html

Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---

 MAINTAINERS                                        |    1 -
 arch/arm/configs/eseries_pxa_defconfig             |    2 +-
 arch/arm/configs/pxa_defconfig                     |    2 +-
 drivers/mmc/host/Kconfig                           |   25 +-
 drivers/mmc/host/Makefile                          |    8 +-
 drivers/mmc/host/tmio_mmc.c                        | 1415 ++++++++++++++++++--
 drivers/mmc/host/tmio_mmc_core.c                   | 1394 -------------------
 drivers/mmc/host/tmio_mmc_original.c               |  167 +++
 .../host/{renesas_sdhi_core.c => tmio_mmc_sdhi.c}  |    2 +-
 .../mmc/host/{renesas_sdhi.h => tmio_mmc_sdhi.h}   |    0
 ...ternal_dmac.c => tmio_mmc_sdhi_internal_dmac.c} |    2 +-
 ...as_sdhi_sys_dmac.c => tmio_mmc_sdhi_sys_dmac.c} |    2 +-
 12 files changed, 1518 insertions(+), 1502 deletions(-)
 delete mode 100644 drivers/mmc/host/tmio_mmc_core.c
 create mode 100644 drivers/mmc/host/tmio_mmc_original.c
 rename drivers/mmc/host/{renesas_sdhi_core.c => tmio_mmc_sdhi.c} (99%)
 rename drivers/mmc/host/{renesas_sdhi.h => tmio_mmc_sdhi.h} (100%)
 rename drivers/mmc/host/{renesas_sdhi_internal_dmac.c => tmio_mmc_sdhi_internal_dmac.c} (99%)
 rename drivers/mmc/host/{renesas_sdhi_sys_dmac.c => tmio_mmc_sdhi_sys_dmac.c} (99%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0fe4228..e95a8ba 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14391,7 +14391,6 @@ M:	Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
 L:	linux-mmc@xxxxxxxxxxxxxxx
 S:	Supported
 F:	drivers/mmc/host/tmio_mmc*
-F:	drivers/mmc/host/renesas_sdhi*
 F:	include/linux/mfd/tmio.h
 
 TMP401 HARDWARE MONITOR DRIVER
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index cd27d65..4dae42a9 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -93,7 +93,7 @@ CONFIG_SND_PXA2XX_SOC=m
 CONFIG_SND_PXA2XX_SOC_E800=m
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-CONFIG_MMC_TMIO=y
+CONFIG_MMC_TMIO_ORIGINAL=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=m
 CONFIG_VFAT_FS=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 5655a1c..5999d69 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -613,7 +613,7 @@ CONFIG_SDIO_UART=m
 CONFIG_MMC_PXA=m
 CONFIG_MMC_SDHCI=m
 CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_MMC_TMIO=m
+CONFIG_MMC_TMIO_ORIGINAL=m
 CONFIG_MMC_DW=m
 CONFIG_MMC_DW_EXYNOS=m
 CONFIG_NEW_LEDS=y
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 0581c19..eb2a127 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -581,21 +581,36 @@ config MMC_SDRICOH_CS
 	  To compile this driver as a module, choose M here: the
 	  module will be called sdricoh_cs.
 
-config MMC_TMIO_CORE
+config MMC_TMIO
 	tristate
 
-config MMC_TMIO
+config MMC_TMIO_ORIGINAL
 	tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
 	depends on MFD_TMIO || MFD_ASIC3
-	select MMC_TMIO_CORE
+	select MMC_TMIO
 	help
 	  This provides support for the SD/MMC cell found in TC6393XB,
 	  T7L66XB and also HTC ASIC3
 
+# Aliases during migration.
+# Rename
+#  MMC_SDHI               -> MMC_TMIO_SDHI
+#  MMC_SDHI_SYS_DMAC      -> MMC_TMIO_SDHI_SYS_DMAC
+#  MMC_SDHI_INTERNAL_DMAC -> MMC_TMIO_SDHI_INTERNAL_DMAC
+config MMC_TMIO_SDHI
+	tristate
+
+config MMC_TMIO_SDHI_SYS_DMAC
+	tristate
+
+config MMC_TMIO_SDHI_INTERNAL_DMAC
+	tristate
+
 config MMC_SDHI
 	tristate "Renesas SDHI SD/SDIO controller support"
 	depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
-	select MMC_TMIO_CORE
+	select MMC_TMIO
+	select MMC_TMIO_SDHI
 	help
 	  This provides support for the SDHI SD/SDIO controller found in
 	  Renesas SuperH, ARM and ARM64 based SoCs
@@ -603,6 +618,7 @@ config MMC_SDHI
 config MMC_SDHI_SYS_DMAC
 	tristate "DMA for SDHI SD/SDIO controllers using SYS-DMAC"
 	depends on MMC_SDHI
+	select MMC_TMIO_SDHI_SYS_DMAC
 	default MMC_SDHI if (SUPERH || ARM)
 	help
 	  This provides DMA support for SDHI SD/SDIO controllers
@@ -613,6 +629,7 @@ config MMC_SDHI_INTERNAL_DMAC
 	tristate "DMA for SDHI SD/SDIO controllers using on-chip bus mastering"
 	depends on ARM64 || COMPILE_TEST
 	depends on MMC_SDHI
+	select MMC_TMIO_SDHI_INTERNAL_DMAC
 	default MMC_SDHI if ARM64
 	help
 	  This provides DMA support for SDHI SD/SDIO controllers
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 85dc132..5e8b80f 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -37,10 +37,10 @@ endif
 obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
 obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
-obj-$(CONFIG_MMC_TMIO_CORE)	+= tmio_mmc_core.o
-obj-$(CONFIG_MMC_SDHI)		+= renesas_sdhi_core.o
-obj-$(CONFIG_MMC_SDHI_SYS_DMAC)		+= renesas_sdhi_sys_dmac.o
-obj-$(CONFIG_MMC_SDHI_INTERNAL_DMAC)	+= renesas_sdhi_internal_dmac.o
+obj-$(CONFIG_MMC_TMIO_ORIGINAL)	+= tmio_mmc_original.o
+obj-$(CONFIG_MMC_TMIO_SDHI)	+= tmio_mmc_sdhi.o
+obj-$(CONFIG_MMC_TMIO_SDHI_SYS_DMAC)		+= tmio_mmc_sdhi_sys_dmac.o
+obj-$(CONFIG_MMC_TMIO_SDHI_INTERNAL_DMAC)	+= tmio_mmc_sdhi_internal_dmac.o
 obj-$(CONFIG_MMC_CB710)		+= cb710-mmc.o
 obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
 octeon-mmc-objs := cavium.o cavium-octeon.o
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 43a2ea5..3080299 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -1,167 +1,1394 @@
 /*
- * Driver for the MMC / SD / SDIO cell found in:
+ * Driver for the MMC / SD / SDIO IP found in:
  *
- * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3
+ * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs
  *
- * Copyright (C) 2017 Renesas Electronics Corporation
+ * Copyright (C) 2015-17 Renesas Electronics Corporation
+ * Copyright (C) 2016-17 Sang Engineering, Wolfram Sang
  * Copyright (C) 2017 Horms Solutions, Simon Horman
+ * Copyright (C) 2011 Guennadi Liakhovetski
  * Copyright (C) 2007 Ian Molton
  * Copyright (C) 2004 Ian Molton
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
+ *
+ * This driver draws mainly on scattered spec sheets, Reverse engineering
+ * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
+ * support). (Further 4 bit support from a later datasheet).
+ *
+ * TODO:
+ *   Investigate using a workqueue for PIO transfers
+ *   Eliminate FIXMEs
+ *   Better Power management
+ *   Handle MMC errors better
+ *   double buffer support
+ *
  */
 
+#include <linux/delay.h>
 #include <linux/device.h>
-#include <linux/mfd/core.h>
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
 #include <linux/mfd/tmio.h>
+#include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/slot-gpio.h>
 #include <linux/module.h>
 #include <linux/pagemap.h>
+#include <linux/platform_device.h>
+#include <linux/pm_qos.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mmc/sdio.h>
 #include <linux/scatterlist.h>
+#include <linux/spinlock.h>
+#include <linux/swiotlb.h>
+#include <linux/workqueue.h>
 
 #include "tmio_mmc.h"
 
-#ifdef CONFIG_PM_SLEEP
-static int tmio_mmc_suspend(struct device *dev)
+static inline void tmio_mmc_start_dma(struct tmio_mmc_host *host,
+				      struct mmc_data *data)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	const struct mfd_cell *cell = mfd_get_cell(pdev);
-	int ret;
+	if (host->dma_ops)
+		host->dma_ops->start(host, data);
+}
 
-	ret = pm_runtime_force_suspend(dev);
+static inline void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable)
+{
+	if (host->dma_ops)
+		host->dma_ops->enable(host, enable);
+}
 
-	/* Tell MFD core it can disable us now.*/
-	if (!ret && cell->disable)
-		cell->disable(pdev);
+static inline void tmio_mmc_request_dma(struct tmio_mmc_host *host,
+					struct tmio_mmc_data *pdata)
+{
+	if (host->dma_ops) {
+		host->dma_ops->request(host, pdata);
+	} else {
+		host->chan_tx = NULL;
+		host->chan_rx = NULL;
+	}
+}
 
-	return ret;
+static inline void tmio_mmc_release_dma(struct tmio_mmc_host *host)
+{
+	if (host->dma_ops)
+		host->dma_ops->release(host);
 }
 
-static int tmio_mmc_resume(struct device *dev)
+static inline void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	const struct mfd_cell *cell = mfd_get_cell(pdev);
-	int ret = 0;
+	if (host->dma_ops)
+		host->dma_ops->abort(host);
+}
 
-	/* Tell the MFD core we are ready to be enabled */
-	if (cell->resume)
-		ret = cell->resume(pdev);
+static inline void tmio_mmc_dataend_dma(struct tmio_mmc_host *host)
+{
+	if (host->dma_ops)
+		host->dma_ops->dataend(host);
+}
 
-	if (!ret)
-		ret = pm_runtime_force_resume(dev);
+void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
+{
+	host->sdcard_irq_mask &= ~(i & TMIO_MASK_IRQ);
+	sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
+}
+EXPORT_SYMBOL_GPL(tmio_mmc_enable_mmc_irqs);
 
-	return ret;
+void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
+{
+	host->sdcard_irq_mask |= (i & TMIO_MASK_IRQ);
+	sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
 }
-#endif
+EXPORT_SYMBOL_GPL(tmio_mmc_disable_mmc_irqs);
 
-static int tmio_mmc_probe(struct platform_device *pdev)
+static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i)
 {
-	const struct mfd_cell *cell = mfd_get_cell(pdev);
-	struct tmio_mmc_data *pdata;
-	struct tmio_mmc_host *host;
-	struct resource *res;
-	int ret = -EINVAL, irq;
+	sd_ctrl_write32_as_16_and_16(host, CTL_STATUS, ~i);
+}
+
+static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data)
+{
+	host->sg_len = data->sg_len;
+	host->sg_ptr = data->sg;
+	host->sg_orig = data->sg;
+	host->sg_off = 0;
+}
+
+static int tmio_mmc_next_sg(struct tmio_mmc_host *host)
+{
+	host->sg_ptr = sg_next(host->sg_ptr);
+	host->sg_off = 0;
+	return --host->sg_len;
+}
+
+#define CMDREQ_TIMEOUT	5000
+
+static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+
+	if (enable && !host->sdio_irq_enabled) {
+		u16 sdio_status;
+
+		/* Keep device active while SDIO irq is enabled */
+		pm_runtime_get_sync(mmc_dev(mmc));
+
+		host->sdio_irq_enabled = true;
+		host->sdio_irq_mask = TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ;
+
+		/* Clear obsolete interrupts before enabling */
+		sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS) & ~TMIO_SDIO_MASK_ALL;
+		if (host->pdata->flags & TMIO_MMC_SDIO_STATUS_SETBITS)
+			sdio_status |= TMIO_SDIO_SETBITS_MASK;
+		sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status);
+
+		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
+	} else if (!enable && host->sdio_irq_enabled) {
+		host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
+		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
+
+		host->sdio_irq_enabled = false;
+		pm_runtime_mark_last_busy(mmc_dev(mmc));
+		pm_runtime_put_autosuspend(mmc_dev(mmc));
+	}
+}
+
+static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
+{
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
+		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
+
+	/* HW engineers overrode docs: no sleep needed on R-Car2+ */
+	if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
+		usleep_range(10000, 11000);
+
+	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
+		sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
+		usleep_range(10000, 11000);
+	}
+}
+
+static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
+{
+	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
+		sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
+		usleep_range(10000, 11000);
+	}
+
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
+		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
+
+	/* HW engineers overrode docs: no sleep needed on R-Car2+ */
+	if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
+		usleep_range(10000, 11000);
+}
+
+static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
+			       unsigned int new_clock)
+{
+	u32 clk = 0, clock;
+
+	if (new_clock == 0) {
+		tmio_mmc_clk_stop(host);
+		return;
+	}
+
+	if (host->clk_update)
+		clock = host->clk_update(host, new_clock) / 512;
+	else
+		clock = host->mmc->f_min;
+
+	for (clk = 0x80000080; new_clock >= (clock << 1); clk >>= 1)
+		clock <<= 1;
+
+	/* 1/1 clock is option */
+	if ((host->pdata->flags & TMIO_MMC_CLK_ACTUAL) && ((clk >> 22) & 0x1))
+		clk |= 0xff;
+
+	if (host->set_clk_div)
+		host->set_clk_div(host->pdev, (clk >> 22) & 1);
+
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
+			sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & CLK_CTL_DIV_MASK);
+	if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
+		usleep_range(10000, 11000);
+
+	tmio_mmc_clk_start(host);
+}
+
+static void tmio_mmc_reset(struct tmio_mmc_host *host)
+{
+	/* FIXME - should we set stop clock reg here */
+	sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
+	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
+		sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
+	usleep_range(10000, 11000);
+	sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
+	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
+		sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
+	usleep_range(10000, 11000);
+
+	if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
+		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
+		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
+	}
+
+}
+
+static void tmio_mmc_reset_work(struct work_struct *work)
+{
+	struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
+						  delayed_reset_work.work);
+	struct mmc_request *mrq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	mrq = host->mrq;
+
+	/*
+	 * is request already finished? Since we use a non-blocking
+	 * cancel_delayed_work(), it can happen, that a .set_ios() call preempts
+	 * us, so, have to check for IS_ERR(host->mrq)
+	 */
+	if (IS_ERR_OR_NULL(mrq) ||
+	    time_is_after_jiffies(host->last_req_ts +
+				  msecs_to_jiffies(CMDREQ_TIMEOUT))) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		return;
+	}
+
+	dev_warn(&host->pdev->dev,
+		 "timeout waiting for hardware interrupt (CMD%u)\n",
+		 mrq->cmd->opcode);
+
+	if (host->data)
+		host->data->error = -ETIMEDOUT;
+	else if (host->cmd)
+		host->cmd->error = -ETIMEDOUT;
+	else
+		mrq->cmd->error = -ETIMEDOUT;
+
+	host->cmd = NULL;
+	host->data = NULL;
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	tmio_mmc_reset(host);
+
+	/* Ready for new calls */
+	host->mrq = NULL;
+
+	tmio_mmc_abort_dma(host);
+	mmc_request_done(host->mmc, mrq);
+}
+
+/* These are the bitmasks the tmio chip requires to implement the MMC response
+ * types. Note that R1 and R6 are the same in this scheme. */
+#define APP_CMD        0x0040
+#define RESP_NONE      0x0300
+#define RESP_R1        0x0400
+#define RESP_R1B       0x0500
+#define RESP_R2        0x0600
+#define RESP_R3        0x0700
+#define DATA_PRESENT   0x0800
+#define TRANSFER_READ  0x1000
+#define TRANSFER_MULTI 0x2000
+#define SECURITY_CMD   0x4000
+#define NO_CMD12_ISSUE 0x4000 /* TMIO_MMC_HAVE_CMD12_CTRL */
+
+static int tmio_mmc_start_command(struct tmio_mmc_host *host,
+				  struct mmc_command *cmd)
+{
+	struct mmc_data *data = host->data;
+	int c = cmd->opcode;
+	u32 irq_mask = TMIO_MASK_CMD;
+
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_NONE: c |= RESP_NONE; break;
+	case MMC_RSP_R1:
+	case MMC_RSP_R1_NO_CRC:
+			   c |= RESP_R1;   break;
+	case MMC_RSP_R1B:  c |= RESP_R1B;  break;
+	case MMC_RSP_R2:   c |= RESP_R2;   break;
+	case MMC_RSP_R3:   c |= RESP_R3;   break;
+	default:
+		pr_debug("Unknown response type %d\n", mmc_resp_type(cmd));
+		return -EINVAL;
+	}
+
+	host->cmd = cmd;
+
+/* FIXME - this seems to be ok commented out but the spec suggest this bit
+ *         should be set when issuing app commands.
+ *	if(cmd->flags & MMC_FLAG_ACMD)
+ *		c |= APP_CMD;
+ */
+	if (data) {
+		c |= DATA_PRESENT;
+		if (data->blocks > 1) {
+			sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, TMIO_STOP_SEC);
+			c |= TRANSFER_MULTI;
+
+			/*
+			 * Disable auto CMD12 at IO_RW_EXTENDED and
+			 * SET_BLOCK_COUNT when doing multiple block transfer
+			 */
+			if ((host->pdata->flags & TMIO_MMC_HAVE_CMD12_CTRL) &&
+			    (cmd->opcode == SD_IO_RW_EXTENDED || host->mrq->sbc))
+				c |= NO_CMD12_ISSUE;
+		}
+		if (data->flags & MMC_DATA_READ)
+			c |= TRANSFER_READ;
+	}
+
+	tmio_mmc_enable_mmc_irqs(host, irq_mask);
+
+	/* Fire off the command */
+	sd_ctrl_write32_as_16_and_16(host, CTL_ARG_REG, cmd->arg);
+	sd_ctrl_write16(host, CTL_SD_CMD, c);
+
+	return 0;
+}
+
+static void tmio_mmc_transfer_data(struct tmio_mmc_host *host,
+				   unsigned short *buf,
+				   unsigned int count)
+{
+	int is_read = host->data->flags & MMC_DATA_READ;
+	u8  *buf8;
+
+	/*
+	 * Transfer the data
+	 */
+	if (host->pdata->flags & TMIO_MMC_32BIT_DATA_PORT) {
+		u32 data = 0;
+		u32 *buf32 = (u32 *)buf;
+
+		if (is_read)
+			sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, buf32,
+					   count >> 2);
+		else
+			sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, buf32,
+					    count >> 2);
+
+		/* if count was multiple of 4 */
+		if (!(count & 0x3))
+			return;
+
+		buf32 += count >> 2;
+		count %= 4;
+
+		if (is_read) {
+			sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, &data, 1);
+			memcpy(buf32, &data, count);
+		} else {
+			memcpy(&data, buf32, count);
+			sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, &data, 1);
+		}
+
+		return;
+	}
+
+	if (is_read)
+		sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
+	else
+		sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
+
+	/* if count was even number */
+	if (!(count & 0x1))
+		return;
+
+	/* if count was odd number */
+	buf8 = (u8 *)(buf + (count >> 1));
+
+	/*
+	 * FIXME
+	 *
+	 * driver and this function are assuming that
+	 * it is used as little endian
+	 */
+	if (is_read)
+		*buf8 = sd_ctrl_read16(host, CTL_SD_DATA_PORT) & 0xff;
+	else
+		sd_ctrl_write16(host, CTL_SD_DATA_PORT, *buf8);
+}
+
+/*
+ * This chip always returns (at least?) as much data as you ask for.
+ * I'm unsure what happens if you ask for less than a block. This should be
+ * looked into to ensure that a funny length read doesn't hose the controller.
+ */
+static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
+{
+	struct mmc_data *data = host->data;
+	void *sg_virt;
+	unsigned short *buf;
+	unsigned int count;
+	unsigned long flags;
+
+	if ((host->chan_tx || host->chan_rx) && !host->force_pio) {
+		pr_err("PIO IRQ in DMA mode!\n");
+		return;
+	} else if (!data) {
+		pr_debug("Spurious PIO IRQ\n");
+		return;
+	}
+
+	sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags);
+	buf = (unsigned short *)(sg_virt + host->sg_off);
+
+	count = host->sg_ptr->length - host->sg_off;
+	if (count > data->blksz)
+		count = data->blksz;
+
+	pr_debug("count: %08x offset: %08x flags %08x\n",
+		 count, host->sg_off, data->flags);
+
+	/* Transfer the data */
+	tmio_mmc_transfer_data(host, buf, count);
+
+	host->sg_off += count;
+
+	tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt);
+
+	if (host->sg_off == host->sg_ptr->length)
+		tmio_mmc_next_sg(host);
+}
+
+static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host)
+{
+	if (host->sg_ptr == &host->bounce_sg) {
+		unsigned long flags;
+		void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags);
+
+		memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length);
+		tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr);
+	}
+}
+
+/* needs to be called with host->lock held */
+void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
+{
+	struct mmc_data *data = host->data;
+	struct mmc_command *stop;
+
+	host->data = NULL;
+
+	if (!data) {
+		dev_warn(&host->pdev->dev, "Spurious data end IRQ\n");
+		return;
+	}
+	stop = data->stop;
+
+	/* FIXME - return correct transfer count on errors */
+	if (!data->error)
+		data->bytes_xfered = data->blocks * data->blksz;
+	else
+		data->bytes_xfered = 0;
+
+	pr_debug("Completed data request\n");
+
+	/*
+	 * FIXME: other drivers allow an optional stop command of any given type
+	 *        which we dont do, as the chip can auto generate them.
+	 *        Perhaps we can be smarter about when to use auto CMD12 and
+	 *        only issue the auto request when we know this is the desired
+	 *        stop command, allowing fallback to the stop command the
+	 *        upper layers expect. For now, we do what works.
+	 */
+
+	if (data->flags & MMC_DATA_READ) {
+		if (host->chan_rx && !host->force_pio)
+			tmio_mmc_check_bounce_buffer(host);
+		dev_dbg(&host->pdev->dev, "Complete Rx request %p\n",
+			host->mrq);
+	} else {
+		dev_dbg(&host->pdev->dev, "Complete Tx request %p\n",
+			host->mrq);
+	}
+
+	if (stop && !host->mrq->sbc) {
+		if (stop->opcode != MMC_STOP_TRANSMISSION || stop->arg)
+			dev_err(&host->pdev->dev, "unsupported stop: CMD%u,0x%x. We did CMD12,0\n",
+				stop->opcode, stop->arg);
+
+		/* fill in response from auto CMD12 */
+		stop->resp[0] = sd_ctrl_read16_and_16_as_32(host, CTL_RESPONSE);
+
+		sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0);
+	}
+
+	schedule_work(&host->done);
+}
+EXPORT_SYMBOL_GPL(tmio_mmc_do_data_irq);
+
+static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat)
+{
+	struct mmc_data *data;
+
+	spin_lock(&host->lock);
+	data = host->data;
+
+	if (!data)
+		goto out;
+
+	if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR ||
+	    stat & TMIO_STAT_TXUNDERRUN)
+		data->error = -EILSEQ;
+	if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) {
+		u32 status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS);
+		bool done = false;
+
+		/*
+		 * Has all data been written out yet? Testing on SuperH showed,
+		 * that in most cases the first interrupt comes already with the
+		 * BUSY status bit clear, but on some operations, like mount or
+		 * in the beginning of a write / sync / umount, there is one
+		 * DATAEND interrupt with the BUSY bit set, in this cases
+		 * waiting for one more interrupt fixes the problem.
+		 */
+		if (host->pdata->flags & TMIO_MMC_HAS_IDLE_WAIT) {
+			if (status & TMIO_STAT_SCLKDIVEN)
+				done = true;
+		} else {
+			if (!(status & TMIO_STAT_CMD_BUSY))
+				done = true;
+		}
+
+		if (done) {
+			tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
+			tmio_mmc_dataend_dma(host);
+		}
+	} else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) {
+		tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
+		tmio_mmc_dataend_dma(host);
+	} else {
+		tmio_mmc_do_data_irq(host);
+		tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP);
+	}
+out:
+	spin_unlock(&host->lock);
+}
+
+static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat)
+{
+	struct mmc_command *cmd = host->cmd;
+	int i, addr;
+
+	spin_lock(&host->lock);
+
+	if (!host->cmd) {
+		pr_debug("Spurious CMD irq\n");
+		goto out;
+	}
+
+	/* This controller is sicker than the PXA one. Not only do we need to
+	 * drop the top 8 bits of the first response word, we also need to
+	 * modify the order of the response for short response command types.
+	 */
+
+	for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
+		cmd->resp[i] = sd_ctrl_read16_and_16_as_32(host, addr);
+
+	if (cmd->flags &  MMC_RSP_136) {
+		cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
+		cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24);
+		cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24);
+		cmd->resp[3] <<= 8;
+	} else if (cmd->flags & MMC_RSP_R3) {
+		cmd->resp[0] = cmd->resp[3];
+	}
+
+	if (stat & TMIO_STAT_CMDTIMEOUT)
+		cmd->error = -ETIMEDOUT;
+	else if ((stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) ||
+		 stat & TMIO_STAT_STOPBIT_ERR ||
+		 stat & TMIO_STAT_CMD_IDX_ERR)
+		cmd->error = -EILSEQ;
+
+	/* If there is data to handle we enable data IRQs here, and
+	 * we will ultimatley finish the request in the data_end handler.
+	 * If theres no data or we encountered an error, finish now.
+	 */
+	if (host->data && (!cmd->error || cmd->error == -EILSEQ)) {
+		if (host->data->flags & MMC_DATA_READ) {
+			if (host->force_pio || !host->chan_rx) {
+				tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP);
+			} else {
+				tmio_mmc_disable_mmc_irqs(host,
+							  TMIO_MASK_READOP);
+				tasklet_schedule(&host->dma_issue);
+			}
+		} else {
+			if (host->force_pio || !host->chan_tx) {
+				tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
+			} else {
+				tmio_mmc_disable_mmc_irqs(host,
+							  TMIO_MASK_WRITEOP);
+				tasklet_schedule(&host->dma_issue);
+			}
+		}
+	} else {
+		schedule_work(&host->done);
+	}
+
+out:
+	spin_unlock(&host->lock);
+}
+
+static bool __tmio_mmc_card_detect_irq(struct tmio_mmc_host *host,
+				       int ireg, int status)
+{
+	struct mmc_host *mmc = host->mmc;
+
+	/* Card insert / remove attempts */
+	if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
+		tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
+			TMIO_STAT_CARD_REMOVE);
+		if ((((ireg & TMIO_STAT_CARD_REMOVE) && mmc->card) ||
+		     ((ireg & TMIO_STAT_CARD_INSERT) && !mmc->card)) &&
+		    !work_pending(&mmc->detect.work))
+			mmc_detect_change(host->mmc, msecs_to_jiffies(100));
+		return true;
+	}
+
+	return false;
+}
+
+static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host *host, int ireg,
+				  int status)
+{
+	/* Command completion */
+	if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) {
+		tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CMDRESPEND |
+				      TMIO_STAT_CMDTIMEOUT);
+		tmio_mmc_cmd_irq(host, status);
+		return true;
+	}
+
+	/* Data transfer */
+	if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
+		tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
+		tmio_mmc_pio_irq(host);
+		return true;
+	}
+
+	/* Data transfer completion */
+	if (ireg & TMIO_STAT_DATAEND) {
+		tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND);
+		tmio_mmc_data_irq(host, status);
+		return true;
+	}
+
+	return false;
+}
+
+static void __tmio_mmc_sdio_irq(struct tmio_mmc_host *host)
+{
+	struct mmc_host *mmc = host->mmc;
+	struct tmio_mmc_data *pdata = host->pdata;
+	unsigned int ireg, status;
+	unsigned int sdio_status;
+
+	if (!(pdata->flags & TMIO_MMC_SDIO_IRQ))
+		return;
+
+	status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
+	ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdio_irq_mask;
+
+	sdio_status = status & ~TMIO_SDIO_MASK_ALL;
+	if (pdata->flags & TMIO_MMC_SDIO_STATUS_SETBITS)
+		sdio_status |= TMIO_SDIO_SETBITS_MASK;
+
+	sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status);
+
+	if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ)
+		mmc_signal_sdio_irq(mmc);
+}
+
+irqreturn_t tmio_mmc_irq(int irq, void *devid)
+{
+	struct tmio_mmc_host *host = devid;
+	unsigned int ireg, status;
+
+	status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS);
+	ireg = status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask;
+
+	/* Clear the status except the interrupt status */
+	sd_ctrl_write32_as_16_and_16(host, CTL_STATUS, TMIO_MASK_IRQ);
 
-	if (pdev->num_resources != 2)
+	if (__tmio_mmc_card_detect_irq(host, ireg, status))
+		return IRQ_HANDLED;
+	if (__tmio_mmc_sdcard_irq(host, ireg, status))
+		return IRQ_HANDLED;
+
+	__tmio_mmc_sdio_irq(host);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL_GPL(tmio_mmc_irq);
+
+static int tmio_mmc_start_data(struct tmio_mmc_host *host,
+			       struct mmc_data *data)
+{
+	struct tmio_mmc_data *pdata = host->pdata;
+
+	pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",
+		 data->blksz, data->blocks);
+
+	/* Some hardware cannot perform 2 byte requests in 4/8 bit mode */
+	if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4 ||
+	    host->mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
+		int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES;
+
+		if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) {
+			pr_err("%s: %d byte block unsupported in 4/8 bit mode\n",
+			       mmc_hostname(host->mmc), data->blksz);
+			return -EINVAL;
+		}
+	}
+
+	tmio_mmc_init_sg(host, data);
+	host->data = data;
+	host->force_pio = false;
+
+	/* Set transfer length / blocksize */
+	sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
+	sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
+
+	tmio_mmc_start_dma(host, data);
+
+	return 0;
+}
+
+static void tmio_mmc_hw_reset(struct mmc_host *mmc)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+
+	if (host->hw_reset)
+		host->hw_reset(host);
+}
+
+static int tmio_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	int i, ret = 0;
+
+	if (!host->init_tuning || !host->select_tuning)
+		/* Tuning is not supported */
 		goto out;
 
-	pdata = pdev->dev.platform_data;
-	if (!pdata || !pdata->hclk)
+	host->tap_num = host->init_tuning(host);
+	if (!host->tap_num)
+		/* Tuning is not supported */
 		goto out;
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		ret = irq;
+	if (host->tap_num * 2 >= sizeof(host->taps) * BITS_PER_BYTE) {
+		dev_warn_once(&host->pdev->dev,
+			"Too many taps, skipping tuning. Please consider updating size of taps field of tmio_mmc_host\n");
 		goto out;
 	}
 
-	/* Tell the MFD core we are ready to be enabled */
-	if (cell->enable) {
-		ret = cell->enable(pdev);
-		if (ret)
+	bitmap_zero(host->taps, host->tap_num * 2);
+
+	/* Issue CMD19 twice for each tap */
+	for (i = 0; i < 2 * host->tap_num; i++) {
+		if (host->prepare_tuning)
+			host->prepare_tuning(host, i % host->tap_num);
+
+		ret = mmc_send_tuning(mmc, opcode, NULL);
+		if (ret && ret != -EILSEQ)
 			goto out;
+		if (ret == 0)
+			set_bit(i, host->taps);
+
+		usleep_range(1000, 1200);
 	}
 
+	ret = host->select_tuning(host);
+
+out:
+	if (ret < 0) {
+		dev_warn(&host->pdev->dev, "Tuning procedure failed\n");
+		tmio_mmc_hw_reset(mmc);
+	}
+
+	return ret;
+}
+
+static void tmio_process_mrq(struct tmio_mmc_host *host,
+			     struct mmc_request *mrq)
+{
+	struct mmc_command *cmd;
+	int ret;
+
+	if (mrq->sbc && host->cmd != mrq->sbc) {
+		cmd = mrq->sbc;
+	} else {
+		cmd = mrq->cmd;
+		if (mrq->data) {
+			ret = tmio_mmc_start_data(host, mrq->data);
+			if (ret)
+				goto fail;
+		}
+	}
+
+	ret = tmio_mmc_start_command(host, cmd);
+	if (ret)
+		goto fail;
+
+	schedule_delayed_work(&host->delayed_reset_work,
+			      msecs_to_jiffies(CMDREQ_TIMEOUT));
+	return;
+
+fail:
+	host->mrq = NULL;
+	mrq->cmd->error = ret;
+	mmc_request_done(host->mmc, mrq);
+}
+
+/* Process requests from the MMC layer */
+static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (host->mrq) {
+		pr_debug("request not null\n");
+		if (IS_ERR(host->mrq)) {
+			spin_unlock_irqrestore(&host->lock, flags);
+			mrq->cmd->error = -EAGAIN;
+			mmc_request_done(mmc, mrq);
+			return;
+		}
+	}
+
+	host->last_req_ts = jiffies;
+	wmb();
+	host->mrq = mrq;
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	tmio_process_mrq(host, mrq);
+}
+
+static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
+{
+	struct mmc_request *mrq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	mrq = host->mrq;
+	if (IS_ERR_OR_NULL(mrq)) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		return;
+	}
+
+	/* If not SET_BLOCK_COUNT, clear old data */
+	if (host->cmd != mrq->sbc) {
+		host->cmd = NULL;
+		host->data = NULL;
+		host->mrq = NULL;
+	}
+
+	cancel_delayed_work(&host->delayed_reset_work);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	if (mrq->cmd->error || (mrq->data && mrq->data->error))
+		tmio_mmc_abort_dma(host);
+
+	if (host->check_scc_error)
+		host->check_scc_error(host);
+
+	/* If SET_BLOCK_COUNT, continue with main command */
+	if (host->mrq && !mrq->cmd->error) {
+		tmio_process_mrq(host, mrq);
+		return;
+	}
+
+	mmc_request_done(host->mmc, mrq);
+}
+
+static void tmio_mmc_done_work(struct work_struct *work)
+{
+	struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
+						  done);
+	tmio_mmc_finish_request(host);
+}
+
+static void tmio_mmc_power_on(struct tmio_mmc_host *host, unsigned short vdd)
+{
+	struct mmc_host *mmc = host->mmc;
+	int ret = 0;
+
+	/* .set_ios() is returning void, so, no chance to report an error */
+
+	if (host->set_pwr)
+		host->set_pwr(host->pdev, 1);
+
+	if (!IS_ERR(mmc->supply.vmmc)) {
+		ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+		/*
+		 * Attention: empiric value. With a b43 WiFi SDIO card this
+		 * delay proved necessary for reliable card-insertion probing.
+		 * 100us were not enough. Is this the same 140us delay, as in
+		 * tmio_mmc_set_ios()?
+		 */
+		usleep_range(200, 300);
+	}
+	/*
+	 * It seems, VccQ should be switched on after Vcc, this is also what the
+	 * omap_hsmmc.c driver does.
+	 */
+	if (!IS_ERR(mmc->supply.vqmmc) && !ret) {
+		ret = regulator_enable(mmc->supply.vqmmc);
+		usleep_range(200, 300);
+	}
+
+	if (ret < 0)
+		dev_dbg(&host->pdev->dev, "Regulators failed to power up: %d\n",
+			ret);
+}
+
+static void tmio_mmc_power_off(struct tmio_mmc_host *host)
+{
+	struct mmc_host *mmc = host->mmc;
+
+	if (!IS_ERR(mmc->supply.vqmmc))
+		regulator_disable(mmc->supply.vqmmc);
+
+	if (!IS_ERR(mmc->supply.vmmc))
+		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+
+	if (host->set_pwr)
+		host->set_pwr(host->pdev, 0);
+}
+
+static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host,
+				   unsigned char bus_width)
+{
+	u16 reg = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT)
+				& ~(CARD_OPT_WIDTH | CARD_OPT_WIDTH8);
+
+	/* reg now applies to MMC_BUS_WIDTH_4 */
+	if (bus_width == MMC_BUS_WIDTH_1)
+		reg |= CARD_OPT_WIDTH;
+	else if (bus_width == MMC_BUS_WIDTH_8)
+		reg |= CARD_OPT_WIDTH8;
+
+	sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, reg);
+}
+
+/* Set MMC clock / power.
+ * Note: This controller uses a simple divider scheme therefore it cannot
+ * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
+ * MMC wont run that fast, it has to be clocked at 12MHz which is the next
+ * slowest setting.
+ */
+static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	struct device *dev = &host->pdev->dev;
+	unsigned long flags;
+
+	mutex_lock(&host->ios_lock);
+
+	spin_lock_irqsave(&host->lock, flags);
+	if (host->mrq) {
+		if (IS_ERR(host->mrq)) {
+			dev_dbg(dev,
+				"%s.%d: concurrent .set_ios(), clk %u, mode %u\n",
+				current->comm, task_pid_nr(current),
+				ios->clock, ios->power_mode);
+			host->mrq = ERR_PTR(-EINTR);
+		} else {
+			dev_dbg(dev,
+				"%s.%d: CMD%u active since %lu, now %lu!\n",
+				current->comm, task_pid_nr(current),
+				host->mrq->cmd->opcode, host->last_req_ts,
+				jiffies);
+		}
+		spin_unlock_irqrestore(&host->lock, flags);
+
+		mutex_unlock(&host->ios_lock);
+		return;
+	}
+
+	host->mrq = ERR_PTR(-EBUSY);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		tmio_mmc_power_off(host);
+		tmio_mmc_clk_stop(host);
+		break;
+	case MMC_POWER_UP:
+		tmio_mmc_power_on(host, ios->vdd);
+		tmio_mmc_set_clock(host, ios->clock);
+		tmio_mmc_set_bus_width(host, ios->bus_width);
+		break;
+	case MMC_POWER_ON:
+		tmio_mmc_set_clock(host, ios->clock);
+		tmio_mmc_set_bus_width(host, ios->bus_width);
+		break;
+	}
+
+	/* Let things settle. delay taken from winCE driver */
+	usleep_range(140, 200);
+	if (PTR_ERR(host->mrq) == -EINTR)
+		dev_dbg(&host->pdev->dev,
+			"%s.%d: IOS interrupted: clk %u, mode %u",
+			current->comm, task_pid_nr(current),
+			ios->clock, ios->power_mode);
+	host->mrq = NULL;
+
+	host->clk_cache = ios->clock;
+
+	mutex_unlock(&host->ios_lock);
+}
+
+static int tmio_mmc_get_ro(struct mmc_host *mmc)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+
+	return !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) &
+		 TMIO_STAT_WRPROTECT);
+}
+
+static int tmio_mmc_get_cd(struct mmc_host *mmc)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+
+	return !!(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) &
+		  TMIO_STAT_SIGSTATE);
+}
+
+static int tmio_multi_io_quirk(struct mmc_card *card,
+			       unsigned int direction, int blk_size)
+{
+	struct tmio_mmc_host *host = mmc_priv(card->host);
+
+	if (host->multi_io_quirk)
+		return host->multi_io_quirk(card, direction, blk_size);
+
+	return blk_size;
+}
+
+static const struct mmc_host_ops tmio_mmc_ops = {
+	.request	= tmio_mmc_request,
+	.set_ios	= tmio_mmc_set_ios,
+	.get_ro         = tmio_mmc_get_ro,
+	.get_cd		= tmio_mmc_get_cd,
+	.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
+	.multi_io_quirk	= tmio_multi_io_quirk,
+	.hw_reset	= tmio_mmc_hw_reset,
+	.execute_tuning = tmio_mmc_execute_tuning,
+};
+
+static int tmio_mmc_init_ocr(struct tmio_mmc_host *host)
+{
+	struct tmio_mmc_data *pdata = host->pdata;
+	struct mmc_host *mmc = host->mmc;
+	int err;
+
+	err = mmc_regulator_get_supply(mmc);
+	if (err)
+		return err;
+
+	/* use ocr_mask if no regulator */
+	if (!mmc->ocr_avail)
+		mmc->ocr_avail =  pdata->ocr_mask;
+
+	/*
+	 * try again.
+	 * There is possibility that regulator has not been probed
+	 */
+	if (!mmc->ocr_avail)
+		return -EPROBE_DEFER;
+
+	return 0;
+}
+
+static void tmio_mmc_of_parse(struct platform_device *pdev,
+			      struct mmc_host *mmc)
+{
+	const struct device_node *np = pdev->dev.of_node;
+
+	if (!np)
+		return;
+
+	/*
+	 * DEPRECATED:
+	 * For new platforms, please use "disable-wp" instead of
+	 * "toshiba,mmc-wrprotect-disable"
+	 */
+	if (of_get_property(np, "toshiba,mmc-wrprotect-disable", NULL))
+		mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
+}
+
+struct tmio_mmc_host *tmio_mmc_host_alloc(struct platform_device *pdev,
+					  struct tmio_mmc_data *pdata)
+{
+	struct tmio_mmc_host *host;
+	struct mmc_host *mmc;
+	struct resource *res;
+	void __iomem *ctl;
+	int ret;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		ret = -EINVAL;
-		goto cell_disable;
+	ctl = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ctl))
+		return ERR_CAST(ctl);
+
+	mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev);
+	if (!mmc)
+		return ERR_PTR(-ENOMEM);
+
+	host = mmc_priv(mmc);
+	host->ctl = ctl;
+	host->mmc = mmc;
+	host->pdev = pdev;
+	host->pdata = pdata;
+	host->ops = tmio_mmc_ops;
+	mmc->ops = &host->ops;
+
+	ret = mmc_of_parse(host->mmc);
+	if (ret) {
+		host = ERR_PTR(ret);
+		goto free;
+	}
+
+	tmio_mmc_of_parse(pdev, mmc);
+
+	platform_set_drvdata(pdev, host);
+
+	return host;
+free:
+	mmc_free_host(mmc);
+
+	return host;
+}
+EXPORT_SYMBOL_GPL(tmio_mmc_host_alloc);
+
+void tmio_mmc_host_free(struct tmio_mmc_host *host)
+{
+	mmc_free_host(host->mmc);
+}
+EXPORT_SYMBOL_GPL(tmio_mmc_host_free);
+
+int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
+{
+	struct platform_device *pdev = _host->pdev;
+	struct tmio_mmc_data *pdata = _host->pdata;
+	struct mmc_host *mmc = _host->mmc;
+	int ret;
+
+	/*
+	 * Check the sanity of mmc->f_min to prevent tmio_mmc_set_clock() from
+	 * looping forever...
+	 */
+	if (mmc->f_min == 0)
+		return -EINVAL;
+
+	if (!(pdata->flags & TMIO_MMC_HAS_IDLE_WAIT))
+		_host->write16_hook = NULL;
+
+	_host->set_pwr = pdata->set_pwr;
+	_host->set_clk_div = pdata->set_clk_div;
+
+	ret = tmio_mmc_init_ocr(_host);
+	if (ret < 0)
+		return ret;
+
+	if (pdata->flags & TMIO_MMC_USE_GPIO_CD) {
+		ret = mmc_gpio_request_cd(mmc, pdata->cd_gpio, 0);
+		if (ret)
+			return ret;
 	}
 
-	pdata->flags |= TMIO_MMC_HAVE_HIGH_REG;
+	mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities;
+	mmc->caps2 |= pdata->capabilities2;
+	mmc->max_segs = pdata->max_segs ? : 32;
+	mmc->max_blk_size = 512;
+	mmc->max_blk_count = pdata->max_blk_count ? :
+		(PAGE_SIZE / mmc->max_blk_size) * mmc->max_segs;
+	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+	/*
+	 * Since swiotlb has memory size limitation, this will calculate
+	 * the maximum size locally (because we don't have any APIs for it now)
+	 * and check the current max_req_size. And then, this will update
+	 * the max_req_size if needed as a workaround.
+	 */
+	if (swiotlb_max_segment()) {
+		unsigned int max_size = (1 << IO_TLB_SHIFT) * IO_TLB_SEGSIZE;
 
-	host = tmio_mmc_host_alloc(pdev, pdata);
-	if (IS_ERR(host)) {
-		ret = PTR_ERR(host);
-		goto cell_disable;
+		if (mmc->max_req_size > max_size)
+			mmc->max_req_size = max_size;
 	}
+	mmc->max_seg_size = mmc->max_req_size;
 
-	/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
-	host->bus_shift = resource_size(res) >> 10;
+	if (mmc_can_gpio_ro(mmc))
+		_host->ops.get_ro = mmc_gpio_get_ro;
 
-	host->mmc->f_max = pdata->hclk;
-	host->mmc->f_min = pdata->hclk / 512;
+	if (mmc_can_gpio_cd(mmc))
+		_host->ops.get_cd = mmc_gpio_get_cd;
 
-	ret = tmio_mmc_host_probe(host);
-	if (ret)
-		goto host_free;
+	_host->native_hotplug = !(mmc_can_gpio_cd(mmc) ||
+				  mmc->caps & MMC_CAP_NEEDS_POLL ||
+				  !mmc_card_is_removable(mmc));
+
+	/*
+	 * On Gen2+, eMMC with NONREMOVABLE currently fails because native
+	 * hotplug gets disabled. It seems RuntimePM related yet we need further
+	 * research. Since we are planning a PM overhaul anyway, let's enforce
+	 * for now the device being active by enabling native hotplug always.
+	 */
+	if (pdata->flags & TMIO_MMC_MIN_RCAR2)
+		_host->native_hotplug = true;
+
+	/*
+	 * While using internal tmio hardware logic for card detection, we need
+	 * to ensure it stays powered for it to work.
+	 */
+	if (_host->native_hotplug)
+		pm_runtime_get_noresume(&pdev->dev);
+
+	_host->sdio_irq_enabled = false;
+	if (pdata->flags & TMIO_MMC_SDIO_IRQ)
+		_host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
 
-	ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_irq,
-			       IRQF_TRIGGER_FALLING,
-			       dev_name(&pdev->dev), host);
+	tmio_mmc_clk_stop(_host);
+	tmio_mmc_reset(_host);
+
+	_host->sdcard_irq_mask = sd_ctrl_read16_and_16_as_32(_host, CTL_IRQ_MASK);
+	tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
+
+	if (_host->native_hotplug)
+		tmio_mmc_enable_mmc_irqs(_host,
+				TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
+
+	spin_lock_init(&_host->lock);
+	mutex_init(&_host->ios_lock);
+
+	/* Init delayed work for request timeouts */
+	INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work);
+	INIT_WORK(&_host->done, tmio_mmc_done_work);
+
+	/* See if we also get DMA */
+	tmio_mmc_request_dma(_host, pdata);
+
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	ret = mmc_add_host(mmc);
 	if (ret)
-		goto host_remove;
+		goto remove_host;
 
-	pr_info("%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
-		(unsigned long)host->ctl, irq);
+	dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
 
 	return 0;
 
-host_remove:
-	tmio_mmc_host_remove(host);
-host_free:
-	tmio_mmc_host_free(host);
-cell_disable:
-	if (cell->disable)
-		cell->disable(pdev);
-out:
+remove_host:
+	tmio_mmc_host_remove(_host);
 	return ret;
 }
+EXPORT_SYMBOL_GPL(tmio_mmc_host_probe);
+
+void tmio_mmc_host_remove(struct tmio_mmc_host *host)
+{
+	struct platform_device *pdev = host->pdev;
+	struct mmc_host *mmc = host->mmc;
+
+	if (host->pdata->flags & TMIO_MMC_SDIO_IRQ)
+		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
+
+	if (!host->native_hotplug)
+		pm_runtime_get_sync(&pdev->dev);
+
+	dev_pm_qos_hide_latency_limit(&pdev->dev);
+
+	mmc_remove_host(mmc);
+	cancel_work_sync(&host->done);
+	cancel_delayed_work_sync(&host->delayed_reset_work);
+	tmio_mmc_release_dma(host);
+
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+}
+EXPORT_SYMBOL_GPL(tmio_mmc_host_remove);
 
-static int tmio_mmc_remove(struct platform_device *pdev)
+#ifdef CONFIG_PM
+static int tmio_mmc_clk_enable(struct tmio_mmc_host *host)
 {
-	const struct mfd_cell *cell = mfd_get_cell(pdev);
-	struct tmio_mmc_host *host = platform_get_drvdata(pdev);
+	if (!host->clk_enable)
+		return -ENOTSUPP;
+
+	return host->clk_enable(host);
+}
+
+static void tmio_mmc_clk_disable(struct tmio_mmc_host *host)
+{
+	if (host->clk_disable)
+		host->clk_disable(host);
+}
+
+int tmio_mmc_host_runtime_suspend(struct device *dev)
+{
+	struct tmio_mmc_host *host = dev_get_drvdata(dev);
+
+	tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL);
+
+	if (host->clk_cache)
+		tmio_mmc_clk_stop(host);
 
-	tmio_mmc_host_remove(host);
-	if (cell->disable)
-		cell->disable(pdev);
+	tmio_mmc_clk_disable(host);
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(tmio_mmc_host_runtime_suspend);
 
-/* ------------------- device registration ----------------------- */
+static bool tmio_mmc_can_retune(struct tmio_mmc_host *host)
+{
+	return host->tap_num && mmc_can_retune(host->mmc);
+}
 
-static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(tmio_mmc_suspend, tmio_mmc_resume)
-	SET_RUNTIME_PM_OPS(tmio_mmc_host_runtime_suspend,
-			   tmio_mmc_host_runtime_resume, NULL)
-};
+int tmio_mmc_host_runtime_resume(struct device *dev)
+{
+	struct tmio_mmc_host *host = dev_get_drvdata(dev);
 
-static struct platform_driver tmio_mmc_driver = {
-	.driver = {
-		.name = "tmio-mmc",
-		.pm = &tmio_mmc_dev_pm_ops,
-	},
-	.probe = tmio_mmc_probe,
-	.remove = tmio_mmc_remove,
-};
+	tmio_mmc_reset(host);
+	tmio_mmc_clk_enable(host);
+
+	if (host->clk_cache)
+		tmio_mmc_set_clock(host, host->clk_cache);
 
-module_platform_driver(tmio_mmc_driver);
+	if (host->native_hotplug)
+		tmio_mmc_enable_mmc_irqs(host,
+				TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
+
+	tmio_mmc_enable_dma(host, true);
+
+	if (tmio_mmc_can_retune(host) && host->select_tuning(host))
+		dev_warn(&host->pdev->dev, "Tuning selection failed\n");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(tmio_mmc_host_runtime_resume);
+#endif
 
-MODULE_DESCRIPTION("Toshiba TMIO SD/MMC driver");
-MODULE_AUTHOR("Ian Molton <spyro@xxxxxxx>");
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:tmio-mmc");
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
deleted file mode 100644
index 3080299..0000000
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ /dev/null
@@ -1,1394 +0,0 @@
-/*
- * Driver for the MMC / SD / SDIO IP found in:
- *
- * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs
- *
- * Copyright (C) 2015-17 Renesas Electronics Corporation
- * Copyright (C) 2016-17 Sang Engineering, Wolfram Sang
- * Copyright (C) 2017 Horms Solutions, Simon Horman
- * Copyright (C) 2011 Guennadi Liakhovetski
- * Copyright (C) 2007 Ian Molton
- * Copyright (C) 2004 Ian Molton
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This driver draws mainly on scattered spec sheets, Reverse engineering
- * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
- * support). (Further 4 bit support from a later datasheet).
- *
- * TODO:
- *   Investigate using a workqueue for PIO transfers
- *   Eliminate FIXMEs
- *   Better Power management
- *   Handle MMC errors better
- *   double buffer support
- *
- */
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/highmem.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/mmc.h>
-#include <linux/mmc/slot-gpio.h>
-#include <linux/module.h>
-#include <linux/pagemap.h>
-#include <linux/platform_device.h>
-#include <linux/pm_qos.h>
-#include <linux/pm_runtime.h>
-#include <linux/regulator/consumer.h>
-#include <linux/mmc/sdio.h>
-#include <linux/scatterlist.h>
-#include <linux/spinlock.h>
-#include <linux/swiotlb.h>
-#include <linux/workqueue.h>
-
-#include "tmio_mmc.h"
-
-static inline void tmio_mmc_start_dma(struct tmio_mmc_host *host,
-				      struct mmc_data *data)
-{
-	if (host->dma_ops)
-		host->dma_ops->start(host, data);
-}
-
-static inline void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable)
-{
-	if (host->dma_ops)
-		host->dma_ops->enable(host, enable);
-}
-
-static inline void tmio_mmc_request_dma(struct tmio_mmc_host *host,
-					struct tmio_mmc_data *pdata)
-{
-	if (host->dma_ops) {
-		host->dma_ops->request(host, pdata);
-	} else {
-		host->chan_tx = NULL;
-		host->chan_rx = NULL;
-	}
-}
-
-static inline void tmio_mmc_release_dma(struct tmio_mmc_host *host)
-{
-	if (host->dma_ops)
-		host->dma_ops->release(host);
-}
-
-static inline void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
-{
-	if (host->dma_ops)
-		host->dma_ops->abort(host);
-}
-
-static inline void tmio_mmc_dataend_dma(struct tmio_mmc_host *host)
-{
-	if (host->dma_ops)
-		host->dma_ops->dataend(host);
-}
-
-void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
-{
-	host->sdcard_irq_mask &= ~(i & TMIO_MASK_IRQ);
-	sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
-}
-EXPORT_SYMBOL_GPL(tmio_mmc_enable_mmc_irqs);
-
-void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
-{
-	host->sdcard_irq_mask |= (i & TMIO_MASK_IRQ);
-	sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
-}
-EXPORT_SYMBOL_GPL(tmio_mmc_disable_mmc_irqs);
-
-static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i)
-{
-	sd_ctrl_write32_as_16_and_16(host, CTL_STATUS, ~i);
-}
-
-static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data)
-{
-	host->sg_len = data->sg_len;
-	host->sg_ptr = data->sg;
-	host->sg_orig = data->sg;
-	host->sg_off = 0;
-}
-
-static int tmio_mmc_next_sg(struct tmio_mmc_host *host)
-{
-	host->sg_ptr = sg_next(host->sg_ptr);
-	host->sg_off = 0;
-	return --host->sg_len;
-}
-
-#define CMDREQ_TIMEOUT	5000
-
-static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
-{
-	struct tmio_mmc_host *host = mmc_priv(mmc);
-
-	if (enable && !host->sdio_irq_enabled) {
-		u16 sdio_status;
-
-		/* Keep device active while SDIO irq is enabled */
-		pm_runtime_get_sync(mmc_dev(mmc));
-
-		host->sdio_irq_enabled = true;
-		host->sdio_irq_mask = TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ;
-
-		/* Clear obsolete interrupts before enabling */
-		sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS) & ~TMIO_SDIO_MASK_ALL;
-		if (host->pdata->flags & TMIO_MMC_SDIO_STATUS_SETBITS)
-			sdio_status |= TMIO_SDIO_SETBITS_MASK;
-		sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status);
-
-		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
-	} else if (!enable && host->sdio_irq_enabled) {
-		host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
-		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
-
-		host->sdio_irq_enabled = false;
-		pm_runtime_mark_last_busy(mmc_dev(mmc));
-		pm_runtime_put_autosuspend(mmc_dev(mmc));
-	}
-}
-
-static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
-{
-	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
-		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
-
-	/* HW engineers overrode docs: no sleep needed on R-Car2+ */
-	if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
-		usleep_range(10000, 11000);
-
-	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
-		sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
-		usleep_range(10000, 11000);
-	}
-}
-
-static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
-{
-	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
-		sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
-		usleep_range(10000, 11000);
-	}
-
-	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
-		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
-
-	/* HW engineers overrode docs: no sleep needed on R-Car2+ */
-	if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
-		usleep_range(10000, 11000);
-}
-
-static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
-			       unsigned int new_clock)
-{
-	u32 clk = 0, clock;
-
-	if (new_clock == 0) {
-		tmio_mmc_clk_stop(host);
-		return;
-	}
-
-	if (host->clk_update)
-		clock = host->clk_update(host, new_clock) / 512;
-	else
-		clock = host->mmc->f_min;
-
-	for (clk = 0x80000080; new_clock >= (clock << 1); clk >>= 1)
-		clock <<= 1;
-
-	/* 1/1 clock is option */
-	if ((host->pdata->flags & TMIO_MMC_CLK_ACTUAL) && ((clk >> 22) & 0x1))
-		clk |= 0xff;
-
-	if (host->set_clk_div)
-		host->set_clk_div(host->pdev, (clk >> 22) & 1);
-
-	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
-			sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
-	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & CLK_CTL_DIV_MASK);
-	if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
-		usleep_range(10000, 11000);
-
-	tmio_mmc_clk_start(host);
-}
-
-static void tmio_mmc_reset(struct tmio_mmc_host *host)
-{
-	/* FIXME - should we set stop clock reg here */
-	sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
-	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
-		sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
-	usleep_range(10000, 11000);
-	sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
-	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
-		sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
-	usleep_range(10000, 11000);
-
-	if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
-		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
-		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
-	}
-
-}
-
-static void tmio_mmc_reset_work(struct work_struct *work)
-{
-	struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
-						  delayed_reset_work.work);
-	struct mmc_request *mrq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&host->lock, flags);
-	mrq = host->mrq;
-
-	/*
-	 * is request already finished? Since we use a non-blocking
-	 * cancel_delayed_work(), it can happen, that a .set_ios() call preempts
-	 * us, so, have to check for IS_ERR(host->mrq)
-	 */
-	if (IS_ERR_OR_NULL(mrq) ||
-	    time_is_after_jiffies(host->last_req_ts +
-				  msecs_to_jiffies(CMDREQ_TIMEOUT))) {
-		spin_unlock_irqrestore(&host->lock, flags);
-		return;
-	}
-
-	dev_warn(&host->pdev->dev,
-		 "timeout waiting for hardware interrupt (CMD%u)\n",
-		 mrq->cmd->opcode);
-
-	if (host->data)
-		host->data->error = -ETIMEDOUT;
-	else if (host->cmd)
-		host->cmd->error = -ETIMEDOUT;
-	else
-		mrq->cmd->error = -ETIMEDOUT;
-
-	host->cmd = NULL;
-	host->data = NULL;
-
-	spin_unlock_irqrestore(&host->lock, flags);
-
-	tmio_mmc_reset(host);
-
-	/* Ready for new calls */
-	host->mrq = NULL;
-
-	tmio_mmc_abort_dma(host);
-	mmc_request_done(host->mmc, mrq);
-}
-
-/* These are the bitmasks the tmio chip requires to implement the MMC response
- * types. Note that R1 and R6 are the same in this scheme. */
-#define APP_CMD        0x0040
-#define RESP_NONE      0x0300
-#define RESP_R1        0x0400
-#define RESP_R1B       0x0500
-#define RESP_R2        0x0600
-#define RESP_R3        0x0700
-#define DATA_PRESENT   0x0800
-#define TRANSFER_READ  0x1000
-#define TRANSFER_MULTI 0x2000
-#define SECURITY_CMD   0x4000
-#define NO_CMD12_ISSUE 0x4000 /* TMIO_MMC_HAVE_CMD12_CTRL */
-
-static int tmio_mmc_start_command(struct tmio_mmc_host *host,
-				  struct mmc_command *cmd)
-{
-	struct mmc_data *data = host->data;
-	int c = cmd->opcode;
-	u32 irq_mask = TMIO_MASK_CMD;
-
-	switch (mmc_resp_type(cmd)) {
-	case MMC_RSP_NONE: c |= RESP_NONE; break;
-	case MMC_RSP_R1:
-	case MMC_RSP_R1_NO_CRC:
-			   c |= RESP_R1;   break;
-	case MMC_RSP_R1B:  c |= RESP_R1B;  break;
-	case MMC_RSP_R2:   c |= RESP_R2;   break;
-	case MMC_RSP_R3:   c |= RESP_R3;   break;
-	default:
-		pr_debug("Unknown response type %d\n", mmc_resp_type(cmd));
-		return -EINVAL;
-	}
-
-	host->cmd = cmd;
-
-/* FIXME - this seems to be ok commented out but the spec suggest this bit
- *         should be set when issuing app commands.
- *	if(cmd->flags & MMC_FLAG_ACMD)
- *		c |= APP_CMD;
- */
-	if (data) {
-		c |= DATA_PRESENT;
-		if (data->blocks > 1) {
-			sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, TMIO_STOP_SEC);
-			c |= TRANSFER_MULTI;
-
-			/*
-			 * Disable auto CMD12 at IO_RW_EXTENDED and
-			 * SET_BLOCK_COUNT when doing multiple block transfer
-			 */
-			if ((host->pdata->flags & TMIO_MMC_HAVE_CMD12_CTRL) &&
-			    (cmd->opcode == SD_IO_RW_EXTENDED || host->mrq->sbc))
-				c |= NO_CMD12_ISSUE;
-		}
-		if (data->flags & MMC_DATA_READ)
-			c |= TRANSFER_READ;
-	}
-
-	tmio_mmc_enable_mmc_irqs(host, irq_mask);
-
-	/* Fire off the command */
-	sd_ctrl_write32_as_16_and_16(host, CTL_ARG_REG, cmd->arg);
-	sd_ctrl_write16(host, CTL_SD_CMD, c);
-
-	return 0;
-}
-
-static void tmio_mmc_transfer_data(struct tmio_mmc_host *host,
-				   unsigned short *buf,
-				   unsigned int count)
-{
-	int is_read = host->data->flags & MMC_DATA_READ;
-	u8  *buf8;
-
-	/*
-	 * Transfer the data
-	 */
-	if (host->pdata->flags & TMIO_MMC_32BIT_DATA_PORT) {
-		u32 data = 0;
-		u32 *buf32 = (u32 *)buf;
-
-		if (is_read)
-			sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, buf32,
-					   count >> 2);
-		else
-			sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, buf32,
-					    count >> 2);
-
-		/* if count was multiple of 4 */
-		if (!(count & 0x3))
-			return;
-
-		buf32 += count >> 2;
-		count %= 4;
-
-		if (is_read) {
-			sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, &data, 1);
-			memcpy(buf32, &data, count);
-		} else {
-			memcpy(&data, buf32, count);
-			sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, &data, 1);
-		}
-
-		return;
-	}
-
-	if (is_read)
-		sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
-	else
-		sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
-
-	/* if count was even number */
-	if (!(count & 0x1))
-		return;
-
-	/* if count was odd number */
-	buf8 = (u8 *)(buf + (count >> 1));
-
-	/*
-	 * FIXME
-	 *
-	 * driver and this function are assuming that
-	 * it is used as little endian
-	 */
-	if (is_read)
-		*buf8 = sd_ctrl_read16(host, CTL_SD_DATA_PORT) & 0xff;
-	else
-		sd_ctrl_write16(host, CTL_SD_DATA_PORT, *buf8);
-}
-
-/*
- * This chip always returns (at least?) as much data as you ask for.
- * I'm unsure what happens if you ask for less than a block. This should be
- * looked into to ensure that a funny length read doesn't hose the controller.
- */
-static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
-{
-	struct mmc_data *data = host->data;
-	void *sg_virt;
-	unsigned short *buf;
-	unsigned int count;
-	unsigned long flags;
-
-	if ((host->chan_tx || host->chan_rx) && !host->force_pio) {
-		pr_err("PIO IRQ in DMA mode!\n");
-		return;
-	} else if (!data) {
-		pr_debug("Spurious PIO IRQ\n");
-		return;
-	}
-
-	sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags);
-	buf = (unsigned short *)(sg_virt + host->sg_off);
-
-	count = host->sg_ptr->length - host->sg_off;
-	if (count > data->blksz)
-		count = data->blksz;
-
-	pr_debug("count: %08x offset: %08x flags %08x\n",
-		 count, host->sg_off, data->flags);
-
-	/* Transfer the data */
-	tmio_mmc_transfer_data(host, buf, count);
-
-	host->sg_off += count;
-
-	tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt);
-
-	if (host->sg_off == host->sg_ptr->length)
-		tmio_mmc_next_sg(host);
-}
-
-static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host)
-{
-	if (host->sg_ptr == &host->bounce_sg) {
-		unsigned long flags;
-		void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags);
-
-		memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length);
-		tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr);
-	}
-}
-
-/* needs to be called with host->lock held */
-void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
-{
-	struct mmc_data *data = host->data;
-	struct mmc_command *stop;
-
-	host->data = NULL;
-
-	if (!data) {
-		dev_warn(&host->pdev->dev, "Spurious data end IRQ\n");
-		return;
-	}
-	stop = data->stop;
-
-	/* FIXME - return correct transfer count on errors */
-	if (!data->error)
-		data->bytes_xfered = data->blocks * data->blksz;
-	else
-		data->bytes_xfered = 0;
-
-	pr_debug("Completed data request\n");
-
-	/*
-	 * FIXME: other drivers allow an optional stop command of any given type
-	 *        which we dont do, as the chip can auto generate them.
-	 *        Perhaps we can be smarter about when to use auto CMD12 and
-	 *        only issue the auto request when we know this is the desired
-	 *        stop command, allowing fallback to the stop command the
-	 *        upper layers expect. For now, we do what works.
-	 */
-
-	if (data->flags & MMC_DATA_READ) {
-		if (host->chan_rx && !host->force_pio)
-			tmio_mmc_check_bounce_buffer(host);
-		dev_dbg(&host->pdev->dev, "Complete Rx request %p\n",
-			host->mrq);
-	} else {
-		dev_dbg(&host->pdev->dev, "Complete Tx request %p\n",
-			host->mrq);
-	}
-
-	if (stop && !host->mrq->sbc) {
-		if (stop->opcode != MMC_STOP_TRANSMISSION || stop->arg)
-			dev_err(&host->pdev->dev, "unsupported stop: CMD%u,0x%x. We did CMD12,0\n",
-				stop->opcode, stop->arg);
-
-		/* fill in response from auto CMD12 */
-		stop->resp[0] = sd_ctrl_read16_and_16_as_32(host, CTL_RESPONSE);
-
-		sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0);
-	}
-
-	schedule_work(&host->done);
-}
-EXPORT_SYMBOL_GPL(tmio_mmc_do_data_irq);
-
-static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat)
-{
-	struct mmc_data *data;
-
-	spin_lock(&host->lock);
-	data = host->data;
-
-	if (!data)
-		goto out;
-
-	if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR ||
-	    stat & TMIO_STAT_TXUNDERRUN)
-		data->error = -EILSEQ;
-	if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) {
-		u32 status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS);
-		bool done = false;
-
-		/*
-		 * Has all data been written out yet? Testing on SuperH showed,
-		 * that in most cases the first interrupt comes already with the
-		 * BUSY status bit clear, but on some operations, like mount or
-		 * in the beginning of a write / sync / umount, there is one
-		 * DATAEND interrupt with the BUSY bit set, in this cases
-		 * waiting for one more interrupt fixes the problem.
-		 */
-		if (host->pdata->flags & TMIO_MMC_HAS_IDLE_WAIT) {
-			if (status & TMIO_STAT_SCLKDIVEN)
-				done = true;
-		} else {
-			if (!(status & TMIO_STAT_CMD_BUSY))
-				done = true;
-		}
-
-		if (done) {
-			tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
-			tmio_mmc_dataend_dma(host);
-		}
-	} else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) {
-		tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
-		tmio_mmc_dataend_dma(host);
-	} else {
-		tmio_mmc_do_data_irq(host);
-		tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP);
-	}
-out:
-	spin_unlock(&host->lock);
-}
-
-static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat)
-{
-	struct mmc_command *cmd = host->cmd;
-	int i, addr;
-
-	spin_lock(&host->lock);
-
-	if (!host->cmd) {
-		pr_debug("Spurious CMD irq\n");
-		goto out;
-	}
-
-	/* This controller is sicker than the PXA one. Not only do we need to
-	 * drop the top 8 bits of the first response word, we also need to
-	 * modify the order of the response for short response command types.
-	 */
-
-	for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
-		cmd->resp[i] = sd_ctrl_read16_and_16_as_32(host, addr);
-
-	if (cmd->flags &  MMC_RSP_136) {
-		cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
-		cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24);
-		cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24);
-		cmd->resp[3] <<= 8;
-	} else if (cmd->flags & MMC_RSP_R3) {
-		cmd->resp[0] = cmd->resp[3];
-	}
-
-	if (stat & TMIO_STAT_CMDTIMEOUT)
-		cmd->error = -ETIMEDOUT;
-	else if ((stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) ||
-		 stat & TMIO_STAT_STOPBIT_ERR ||
-		 stat & TMIO_STAT_CMD_IDX_ERR)
-		cmd->error = -EILSEQ;
-
-	/* If there is data to handle we enable data IRQs here, and
-	 * we will ultimatley finish the request in the data_end handler.
-	 * If theres no data or we encountered an error, finish now.
-	 */
-	if (host->data && (!cmd->error || cmd->error == -EILSEQ)) {
-		if (host->data->flags & MMC_DATA_READ) {
-			if (host->force_pio || !host->chan_rx) {
-				tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP);
-			} else {
-				tmio_mmc_disable_mmc_irqs(host,
-							  TMIO_MASK_READOP);
-				tasklet_schedule(&host->dma_issue);
-			}
-		} else {
-			if (host->force_pio || !host->chan_tx) {
-				tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
-			} else {
-				tmio_mmc_disable_mmc_irqs(host,
-							  TMIO_MASK_WRITEOP);
-				tasklet_schedule(&host->dma_issue);
-			}
-		}
-	} else {
-		schedule_work(&host->done);
-	}
-
-out:
-	spin_unlock(&host->lock);
-}
-
-static bool __tmio_mmc_card_detect_irq(struct tmio_mmc_host *host,
-				       int ireg, int status)
-{
-	struct mmc_host *mmc = host->mmc;
-
-	/* Card insert / remove attempts */
-	if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
-		tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
-			TMIO_STAT_CARD_REMOVE);
-		if ((((ireg & TMIO_STAT_CARD_REMOVE) && mmc->card) ||
-		     ((ireg & TMIO_STAT_CARD_INSERT) && !mmc->card)) &&
-		    !work_pending(&mmc->detect.work))
-			mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-		return true;
-	}
-
-	return false;
-}
-
-static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host *host, int ireg,
-				  int status)
-{
-	/* Command completion */
-	if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) {
-		tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CMDRESPEND |
-				      TMIO_STAT_CMDTIMEOUT);
-		tmio_mmc_cmd_irq(host, status);
-		return true;
-	}
-
-	/* Data transfer */
-	if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
-		tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
-		tmio_mmc_pio_irq(host);
-		return true;
-	}
-
-	/* Data transfer completion */
-	if (ireg & TMIO_STAT_DATAEND) {
-		tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND);
-		tmio_mmc_data_irq(host, status);
-		return true;
-	}
-
-	return false;
-}
-
-static void __tmio_mmc_sdio_irq(struct tmio_mmc_host *host)
-{
-	struct mmc_host *mmc = host->mmc;
-	struct tmio_mmc_data *pdata = host->pdata;
-	unsigned int ireg, status;
-	unsigned int sdio_status;
-
-	if (!(pdata->flags & TMIO_MMC_SDIO_IRQ))
-		return;
-
-	status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
-	ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdio_irq_mask;
-
-	sdio_status = status & ~TMIO_SDIO_MASK_ALL;
-	if (pdata->flags & TMIO_MMC_SDIO_STATUS_SETBITS)
-		sdio_status |= TMIO_SDIO_SETBITS_MASK;
-
-	sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status);
-
-	if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ)
-		mmc_signal_sdio_irq(mmc);
-}
-
-irqreturn_t tmio_mmc_irq(int irq, void *devid)
-{
-	struct tmio_mmc_host *host = devid;
-	unsigned int ireg, status;
-
-	status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS);
-	ireg = status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask;
-
-	/* Clear the status except the interrupt status */
-	sd_ctrl_write32_as_16_and_16(host, CTL_STATUS, TMIO_MASK_IRQ);
-
-	if (__tmio_mmc_card_detect_irq(host, ireg, status))
-		return IRQ_HANDLED;
-	if (__tmio_mmc_sdcard_irq(host, ireg, status))
-		return IRQ_HANDLED;
-
-	__tmio_mmc_sdio_irq(host);
-
-	return IRQ_HANDLED;
-}
-EXPORT_SYMBOL_GPL(tmio_mmc_irq);
-
-static int tmio_mmc_start_data(struct tmio_mmc_host *host,
-			       struct mmc_data *data)
-{
-	struct tmio_mmc_data *pdata = host->pdata;
-
-	pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",
-		 data->blksz, data->blocks);
-
-	/* Some hardware cannot perform 2 byte requests in 4/8 bit mode */
-	if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4 ||
-	    host->mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
-		int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES;
-
-		if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) {
-			pr_err("%s: %d byte block unsupported in 4/8 bit mode\n",
-			       mmc_hostname(host->mmc), data->blksz);
-			return -EINVAL;
-		}
-	}
-
-	tmio_mmc_init_sg(host, data);
-	host->data = data;
-	host->force_pio = false;
-
-	/* Set transfer length / blocksize */
-	sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
-	sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
-
-	tmio_mmc_start_dma(host, data);
-
-	return 0;
-}
-
-static void tmio_mmc_hw_reset(struct mmc_host *mmc)
-{
-	struct tmio_mmc_host *host = mmc_priv(mmc);
-
-	if (host->hw_reset)
-		host->hw_reset(host);
-}
-
-static int tmio_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
-{
-	struct tmio_mmc_host *host = mmc_priv(mmc);
-	int i, ret = 0;
-
-	if (!host->init_tuning || !host->select_tuning)
-		/* Tuning is not supported */
-		goto out;
-
-	host->tap_num = host->init_tuning(host);
-	if (!host->tap_num)
-		/* Tuning is not supported */
-		goto out;
-
-	if (host->tap_num * 2 >= sizeof(host->taps) * BITS_PER_BYTE) {
-		dev_warn_once(&host->pdev->dev,
-			"Too many taps, skipping tuning. Please consider updating size of taps field of tmio_mmc_host\n");
-		goto out;
-	}
-
-	bitmap_zero(host->taps, host->tap_num * 2);
-
-	/* Issue CMD19 twice for each tap */
-	for (i = 0; i < 2 * host->tap_num; i++) {
-		if (host->prepare_tuning)
-			host->prepare_tuning(host, i % host->tap_num);
-
-		ret = mmc_send_tuning(mmc, opcode, NULL);
-		if (ret && ret != -EILSEQ)
-			goto out;
-		if (ret == 0)
-			set_bit(i, host->taps);
-
-		usleep_range(1000, 1200);
-	}
-
-	ret = host->select_tuning(host);
-
-out:
-	if (ret < 0) {
-		dev_warn(&host->pdev->dev, "Tuning procedure failed\n");
-		tmio_mmc_hw_reset(mmc);
-	}
-
-	return ret;
-}
-
-static void tmio_process_mrq(struct tmio_mmc_host *host,
-			     struct mmc_request *mrq)
-{
-	struct mmc_command *cmd;
-	int ret;
-
-	if (mrq->sbc && host->cmd != mrq->sbc) {
-		cmd = mrq->sbc;
-	} else {
-		cmd = mrq->cmd;
-		if (mrq->data) {
-			ret = tmio_mmc_start_data(host, mrq->data);
-			if (ret)
-				goto fail;
-		}
-	}
-
-	ret = tmio_mmc_start_command(host, cmd);
-	if (ret)
-		goto fail;
-
-	schedule_delayed_work(&host->delayed_reset_work,
-			      msecs_to_jiffies(CMDREQ_TIMEOUT));
-	return;
-
-fail:
-	host->mrq = NULL;
-	mrq->cmd->error = ret;
-	mmc_request_done(host->mmc, mrq);
-}
-
-/* Process requests from the MMC layer */
-static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
-{
-	struct tmio_mmc_host *host = mmc_priv(mmc);
-	unsigned long flags;
-
-	spin_lock_irqsave(&host->lock, flags);
-
-	if (host->mrq) {
-		pr_debug("request not null\n");
-		if (IS_ERR(host->mrq)) {
-			spin_unlock_irqrestore(&host->lock, flags);
-			mrq->cmd->error = -EAGAIN;
-			mmc_request_done(mmc, mrq);
-			return;
-		}
-	}
-
-	host->last_req_ts = jiffies;
-	wmb();
-	host->mrq = mrq;
-
-	spin_unlock_irqrestore(&host->lock, flags);
-
-	tmio_process_mrq(host, mrq);
-}
-
-static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
-{
-	struct mmc_request *mrq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&host->lock, flags);
-
-	mrq = host->mrq;
-	if (IS_ERR_OR_NULL(mrq)) {
-		spin_unlock_irqrestore(&host->lock, flags);
-		return;
-	}
-
-	/* If not SET_BLOCK_COUNT, clear old data */
-	if (host->cmd != mrq->sbc) {
-		host->cmd = NULL;
-		host->data = NULL;
-		host->mrq = NULL;
-	}
-
-	cancel_delayed_work(&host->delayed_reset_work);
-
-	spin_unlock_irqrestore(&host->lock, flags);
-
-	if (mrq->cmd->error || (mrq->data && mrq->data->error))
-		tmio_mmc_abort_dma(host);
-
-	if (host->check_scc_error)
-		host->check_scc_error(host);
-
-	/* If SET_BLOCK_COUNT, continue with main command */
-	if (host->mrq && !mrq->cmd->error) {
-		tmio_process_mrq(host, mrq);
-		return;
-	}
-
-	mmc_request_done(host->mmc, mrq);
-}
-
-static void tmio_mmc_done_work(struct work_struct *work)
-{
-	struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
-						  done);
-	tmio_mmc_finish_request(host);
-}
-
-static void tmio_mmc_power_on(struct tmio_mmc_host *host, unsigned short vdd)
-{
-	struct mmc_host *mmc = host->mmc;
-	int ret = 0;
-
-	/* .set_ios() is returning void, so, no chance to report an error */
-
-	if (host->set_pwr)
-		host->set_pwr(host->pdev, 1);
-
-	if (!IS_ERR(mmc->supply.vmmc)) {
-		ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
-		/*
-		 * Attention: empiric value. With a b43 WiFi SDIO card this
-		 * delay proved necessary for reliable card-insertion probing.
-		 * 100us were not enough. Is this the same 140us delay, as in
-		 * tmio_mmc_set_ios()?
-		 */
-		usleep_range(200, 300);
-	}
-	/*
-	 * It seems, VccQ should be switched on after Vcc, this is also what the
-	 * omap_hsmmc.c driver does.
-	 */
-	if (!IS_ERR(mmc->supply.vqmmc) && !ret) {
-		ret = regulator_enable(mmc->supply.vqmmc);
-		usleep_range(200, 300);
-	}
-
-	if (ret < 0)
-		dev_dbg(&host->pdev->dev, "Regulators failed to power up: %d\n",
-			ret);
-}
-
-static void tmio_mmc_power_off(struct tmio_mmc_host *host)
-{
-	struct mmc_host *mmc = host->mmc;
-
-	if (!IS_ERR(mmc->supply.vqmmc))
-		regulator_disable(mmc->supply.vqmmc);
-
-	if (!IS_ERR(mmc->supply.vmmc))
-		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
-
-	if (host->set_pwr)
-		host->set_pwr(host->pdev, 0);
-}
-
-static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host,
-				   unsigned char bus_width)
-{
-	u16 reg = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT)
-				& ~(CARD_OPT_WIDTH | CARD_OPT_WIDTH8);
-
-	/* reg now applies to MMC_BUS_WIDTH_4 */
-	if (bus_width == MMC_BUS_WIDTH_1)
-		reg |= CARD_OPT_WIDTH;
-	else if (bus_width == MMC_BUS_WIDTH_8)
-		reg |= CARD_OPT_WIDTH8;
-
-	sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, reg);
-}
-
-/* Set MMC clock / power.
- * Note: This controller uses a simple divider scheme therefore it cannot
- * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
- * MMC wont run that fast, it has to be clocked at 12MHz which is the next
- * slowest setting.
- */
-static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-{
-	struct tmio_mmc_host *host = mmc_priv(mmc);
-	struct device *dev = &host->pdev->dev;
-	unsigned long flags;
-
-	mutex_lock(&host->ios_lock);
-
-	spin_lock_irqsave(&host->lock, flags);
-	if (host->mrq) {
-		if (IS_ERR(host->mrq)) {
-			dev_dbg(dev,
-				"%s.%d: concurrent .set_ios(), clk %u, mode %u\n",
-				current->comm, task_pid_nr(current),
-				ios->clock, ios->power_mode);
-			host->mrq = ERR_PTR(-EINTR);
-		} else {
-			dev_dbg(dev,
-				"%s.%d: CMD%u active since %lu, now %lu!\n",
-				current->comm, task_pid_nr(current),
-				host->mrq->cmd->opcode, host->last_req_ts,
-				jiffies);
-		}
-		spin_unlock_irqrestore(&host->lock, flags);
-
-		mutex_unlock(&host->ios_lock);
-		return;
-	}
-
-	host->mrq = ERR_PTR(-EBUSY);
-
-	spin_unlock_irqrestore(&host->lock, flags);
-
-	switch (ios->power_mode) {
-	case MMC_POWER_OFF:
-		tmio_mmc_power_off(host);
-		tmio_mmc_clk_stop(host);
-		break;
-	case MMC_POWER_UP:
-		tmio_mmc_power_on(host, ios->vdd);
-		tmio_mmc_set_clock(host, ios->clock);
-		tmio_mmc_set_bus_width(host, ios->bus_width);
-		break;
-	case MMC_POWER_ON:
-		tmio_mmc_set_clock(host, ios->clock);
-		tmio_mmc_set_bus_width(host, ios->bus_width);
-		break;
-	}
-
-	/* Let things settle. delay taken from winCE driver */
-	usleep_range(140, 200);
-	if (PTR_ERR(host->mrq) == -EINTR)
-		dev_dbg(&host->pdev->dev,
-			"%s.%d: IOS interrupted: clk %u, mode %u",
-			current->comm, task_pid_nr(current),
-			ios->clock, ios->power_mode);
-	host->mrq = NULL;
-
-	host->clk_cache = ios->clock;
-
-	mutex_unlock(&host->ios_lock);
-}
-
-static int tmio_mmc_get_ro(struct mmc_host *mmc)
-{
-	struct tmio_mmc_host *host = mmc_priv(mmc);
-
-	return !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) &
-		 TMIO_STAT_WRPROTECT);
-}
-
-static int tmio_mmc_get_cd(struct mmc_host *mmc)
-{
-	struct tmio_mmc_host *host = mmc_priv(mmc);
-
-	return !!(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) &
-		  TMIO_STAT_SIGSTATE);
-}
-
-static int tmio_multi_io_quirk(struct mmc_card *card,
-			       unsigned int direction, int blk_size)
-{
-	struct tmio_mmc_host *host = mmc_priv(card->host);
-
-	if (host->multi_io_quirk)
-		return host->multi_io_quirk(card, direction, blk_size);
-
-	return blk_size;
-}
-
-static const struct mmc_host_ops tmio_mmc_ops = {
-	.request	= tmio_mmc_request,
-	.set_ios	= tmio_mmc_set_ios,
-	.get_ro         = tmio_mmc_get_ro,
-	.get_cd		= tmio_mmc_get_cd,
-	.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
-	.multi_io_quirk	= tmio_multi_io_quirk,
-	.hw_reset	= tmio_mmc_hw_reset,
-	.execute_tuning = tmio_mmc_execute_tuning,
-};
-
-static int tmio_mmc_init_ocr(struct tmio_mmc_host *host)
-{
-	struct tmio_mmc_data *pdata = host->pdata;
-	struct mmc_host *mmc = host->mmc;
-	int err;
-
-	err = mmc_regulator_get_supply(mmc);
-	if (err)
-		return err;
-
-	/* use ocr_mask if no regulator */
-	if (!mmc->ocr_avail)
-		mmc->ocr_avail =  pdata->ocr_mask;
-
-	/*
-	 * try again.
-	 * There is possibility that regulator has not been probed
-	 */
-	if (!mmc->ocr_avail)
-		return -EPROBE_DEFER;
-
-	return 0;
-}
-
-static void tmio_mmc_of_parse(struct platform_device *pdev,
-			      struct mmc_host *mmc)
-{
-	const struct device_node *np = pdev->dev.of_node;
-
-	if (!np)
-		return;
-
-	/*
-	 * DEPRECATED:
-	 * For new platforms, please use "disable-wp" instead of
-	 * "toshiba,mmc-wrprotect-disable"
-	 */
-	if (of_get_property(np, "toshiba,mmc-wrprotect-disable", NULL))
-		mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
-}
-
-struct tmio_mmc_host *tmio_mmc_host_alloc(struct platform_device *pdev,
-					  struct tmio_mmc_data *pdata)
-{
-	struct tmio_mmc_host *host;
-	struct mmc_host *mmc;
-	struct resource *res;
-	void __iomem *ctl;
-	int ret;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ctl = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(ctl))
-		return ERR_CAST(ctl);
-
-	mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev);
-	if (!mmc)
-		return ERR_PTR(-ENOMEM);
-
-	host = mmc_priv(mmc);
-	host->ctl = ctl;
-	host->mmc = mmc;
-	host->pdev = pdev;
-	host->pdata = pdata;
-	host->ops = tmio_mmc_ops;
-	mmc->ops = &host->ops;
-
-	ret = mmc_of_parse(host->mmc);
-	if (ret) {
-		host = ERR_PTR(ret);
-		goto free;
-	}
-
-	tmio_mmc_of_parse(pdev, mmc);
-
-	platform_set_drvdata(pdev, host);
-
-	return host;
-free:
-	mmc_free_host(mmc);
-
-	return host;
-}
-EXPORT_SYMBOL_GPL(tmio_mmc_host_alloc);
-
-void tmio_mmc_host_free(struct tmio_mmc_host *host)
-{
-	mmc_free_host(host->mmc);
-}
-EXPORT_SYMBOL_GPL(tmio_mmc_host_free);
-
-int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
-{
-	struct platform_device *pdev = _host->pdev;
-	struct tmio_mmc_data *pdata = _host->pdata;
-	struct mmc_host *mmc = _host->mmc;
-	int ret;
-
-	/*
-	 * Check the sanity of mmc->f_min to prevent tmio_mmc_set_clock() from
-	 * looping forever...
-	 */
-	if (mmc->f_min == 0)
-		return -EINVAL;
-
-	if (!(pdata->flags & TMIO_MMC_HAS_IDLE_WAIT))
-		_host->write16_hook = NULL;
-
-	_host->set_pwr = pdata->set_pwr;
-	_host->set_clk_div = pdata->set_clk_div;
-
-	ret = tmio_mmc_init_ocr(_host);
-	if (ret < 0)
-		return ret;
-
-	if (pdata->flags & TMIO_MMC_USE_GPIO_CD) {
-		ret = mmc_gpio_request_cd(mmc, pdata->cd_gpio, 0);
-		if (ret)
-			return ret;
-	}
-
-	mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities;
-	mmc->caps2 |= pdata->capabilities2;
-	mmc->max_segs = pdata->max_segs ? : 32;
-	mmc->max_blk_size = 512;
-	mmc->max_blk_count = pdata->max_blk_count ? :
-		(PAGE_SIZE / mmc->max_blk_size) * mmc->max_segs;
-	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
-	/*
-	 * Since swiotlb has memory size limitation, this will calculate
-	 * the maximum size locally (because we don't have any APIs for it now)
-	 * and check the current max_req_size. And then, this will update
-	 * the max_req_size if needed as a workaround.
-	 */
-	if (swiotlb_max_segment()) {
-		unsigned int max_size = (1 << IO_TLB_SHIFT) * IO_TLB_SEGSIZE;
-
-		if (mmc->max_req_size > max_size)
-			mmc->max_req_size = max_size;
-	}
-	mmc->max_seg_size = mmc->max_req_size;
-
-	if (mmc_can_gpio_ro(mmc))
-		_host->ops.get_ro = mmc_gpio_get_ro;
-
-	if (mmc_can_gpio_cd(mmc))
-		_host->ops.get_cd = mmc_gpio_get_cd;
-
-	_host->native_hotplug = !(mmc_can_gpio_cd(mmc) ||
-				  mmc->caps & MMC_CAP_NEEDS_POLL ||
-				  !mmc_card_is_removable(mmc));
-
-	/*
-	 * On Gen2+, eMMC with NONREMOVABLE currently fails because native
-	 * hotplug gets disabled. It seems RuntimePM related yet we need further
-	 * research. Since we are planning a PM overhaul anyway, let's enforce
-	 * for now the device being active by enabling native hotplug always.
-	 */
-	if (pdata->flags & TMIO_MMC_MIN_RCAR2)
-		_host->native_hotplug = true;
-
-	/*
-	 * While using internal tmio hardware logic for card detection, we need
-	 * to ensure it stays powered for it to work.
-	 */
-	if (_host->native_hotplug)
-		pm_runtime_get_noresume(&pdev->dev);
-
-	_host->sdio_irq_enabled = false;
-	if (pdata->flags & TMIO_MMC_SDIO_IRQ)
-		_host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
-
-	tmio_mmc_clk_stop(_host);
-	tmio_mmc_reset(_host);
-
-	_host->sdcard_irq_mask = sd_ctrl_read16_and_16_as_32(_host, CTL_IRQ_MASK);
-	tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
-
-	if (_host->native_hotplug)
-		tmio_mmc_enable_mmc_irqs(_host,
-				TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
-
-	spin_lock_init(&_host->lock);
-	mutex_init(&_host->ios_lock);
-
-	/* Init delayed work for request timeouts */
-	INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work);
-	INIT_WORK(&_host->done, tmio_mmc_done_work);
-
-	/* See if we also get DMA */
-	tmio_mmc_request_dma(_host, pdata);
-
-	pm_runtime_set_active(&pdev->dev);
-	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
-	pm_runtime_use_autosuspend(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
-
-	ret = mmc_add_host(mmc);
-	if (ret)
-		goto remove_host;
-
-	dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
-
-	return 0;
-
-remove_host:
-	tmio_mmc_host_remove(_host);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(tmio_mmc_host_probe);
-
-void tmio_mmc_host_remove(struct tmio_mmc_host *host)
-{
-	struct platform_device *pdev = host->pdev;
-	struct mmc_host *mmc = host->mmc;
-
-	if (host->pdata->flags & TMIO_MMC_SDIO_IRQ)
-		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
-
-	if (!host->native_hotplug)
-		pm_runtime_get_sync(&pdev->dev);
-
-	dev_pm_qos_hide_latency_limit(&pdev->dev);
-
-	mmc_remove_host(mmc);
-	cancel_work_sync(&host->done);
-	cancel_delayed_work_sync(&host->delayed_reset_work);
-	tmio_mmc_release_dma(host);
-
-	pm_runtime_put_sync(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
-}
-EXPORT_SYMBOL_GPL(tmio_mmc_host_remove);
-
-#ifdef CONFIG_PM
-static int tmio_mmc_clk_enable(struct tmio_mmc_host *host)
-{
-	if (!host->clk_enable)
-		return -ENOTSUPP;
-
-	return host->clk_enable(host);
-}
-
-static void tmio_mmc_clk_disable(struct tmio_mmc_host *host)
-{
-	if (host->clk_disable)
-		host->clk_disable(host);
-}
-
-int tmio_mmc_host_runtime_suspend(struct device *dev)
-{
-	struct tmio_mmc_host *host = dev_get_drvdata(dev);
-
-	tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL);
-
-	if (host->clk_cache)
-		tmio_mmc_clk_stop(host);
-
-	tmio_mmc_clk_disable(host);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(tmio_mmc_host_runtime_suspend);
-
-static bool tmio_mmc_can_retune(struct tmio_mmc_host *host)
-{
-	return host->tap_num && mmc_can_retune(host->mmc);
-}
-
-int tmio_mmc_host_runtime_resume(struct device *dev)
-{
-	struct tmio_mmc_host *host = dev_get_drvdata(dev);
-
-	tmio_mmc_reset(host);
-	tmio_mmc_clk_enable(host);
-
-	if (host->clk_cache)
-		tmio_mmc_set_clock(host, host->clk_cache);
-
-	if (host->native_hotplug)
-		tmio_mmc_enable_mmc_irqs(host,
-				TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
-
-	tmio_mmc_enable_dma(host, true);
-
-	if (tmio_mmc_can_retune(host) && host->select_tuning(host))
-		dev_warn(&host->pdev->dev, "Tuning selection failed\n");
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(tmio_mmc_host_runtime_resume);
-#endif
-
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/tmio_mmc_original.c b/drivers/mmc/host/tmio_mmc_original.c
new file mode 100644
index 0000000..43a2ea5
--- /dev/null
+++ b/drivers/mmc/host/tmio_mmc_original.c
@@ -0,0 +1,167 @@
+/*
+ * Driver for the MMC / SD / SDIO cell found in:
+ *
+ * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3
+ *
+ * Copyright (C) 2017 Renesas Electronics Corporation
+ * Copyright (C) 2017 Horms Solutions, Simon Horman
+ * Copyright (C) 2007 Ian Molton
+ * Copyright (C) 2004 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/pagemap.h>
+#include <linux/scatterlist.h>
+
+#include "tmio_mmc.h"
+
+#ifdef CONFIG_PM_SLEEP
+static int tmio_mmc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	int ret;
+
+	ret = pm_runtime_force_suspend(dev);
+
+	/* Tell MFD core it can disable us now.*/
+	if (!ret && cell->disable)
+		cell->disable(pdev);
+
+	return ret;
+}
+
+static int tmio_mmc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	int ret = 0;
+
+	/* Tell the MFD core we are ready to be enabled */
+	if (cell->resume)
+		ret = cell->resume(pdev);
+
+	if (!ret)
+		ret = pm_runtime_force_resume(dev);
+
+	return ret;
+}
+#endif
+
+static int tmio_mmc_probe(struct platform_device *pdev)
+{
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	struct tmio_mmc_data *pdata;
+	struct tmio_mmc_host *host;
+	struct resource *res;
+	int ret = -EINVAL, irq;
+
+	if (pdev->num_resources != 2)
+		goto out;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata || !pdata->hclk)
+		goto out;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto out;
+	}
+
+	/* Tell the MFD core we are ready to be enabled */
+	if (cell->enable) {
+		ret = cell->enable(pdev);
+		if (ret)
+			goto out;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -EINVAL;
+		goto cell_disable;
+	}
+
+	pdata->flags |= TMIO_MMC_HAVE_HIGH_REG;
+
+	host = tmio_mmc_host_alloc(pdev, pdata);
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		goto cell_disable;
+	}
+
+	/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
+	host->bus_shift = resource_size(res) >> 10;
+
+	host->mmc->f_max = pdata->hclk;
+	host->mmc->f_min = pdata->hclk / 512;
+
+	ret = tmio_mmc_host_probe(host);
+	if (ret)
+		goto host_free;
+
+	ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_irq,
+			       IRQF_TRIGGER_FALLING,
+			       dev_name(&pdev->dev), host);
+	if (ret)
+		goto host_remove;
+
+	pr_info("%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
+		(unsigned long)host->ctl, irq);
+
+	return 0;
+
+host_remove:
+	tmio_mmc_host_remove(host);
+host_free:
+	tmio_mmc_host_free(host);
+cell_disable:
+	if (cell->disable)
+		cell->disable(pdev);
+out:
+	return ret;
+}
+
+static int tmio_mmc_remove(struct platform_device *pdev)
+{
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	struct tmio_mmc_host *host = platform_get_drvdata(pdev);
+
+	tmio_mmc_host_remove(host);
+	if (cell->disable)
+		cell->disable(pdev);
+
+	return 0;
+}
+
+/* ------------------- device registration ----------------------- */
+
+static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(tmio_mmc_suspend, tmio_mmc_resume)
+	SET_RUNTIME_PM_OPS(tmio_mmc_host_runtime_suspend,
+			   tmio_mmc_host_runtime_resume, NULL)
+};
+
+static struct platform_driver tmio_mmc_driver = {
+	.driver = {
+		.name = "tmio-mmc",
+		.pm = &tmio_mmc_dev_pm_ops,
+	},
+	.probe = tmio_mmc_probe,
+	.remove = tmio_mmc_remove,
+};
+
+module_platform_driver(tmio_mmc_driver);
+
+MODULE_DESCRIPTION("Toshiba TMIO SD/MMC driver");
+MODULE_AUTHOR("Ian Molton <spyro@xxxxxxx>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tmio-mmc");
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/tmio_mmc_sdhi.c
similarity index 99%
rename from drivers/mmc/host/renesas_sdhi_core.c
rename to drivers/mmc/host/tmio_mmc_sdhi.c
index 45c015da..a440f5d 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/tmio_mmc_sdhi.c
@@ -36,7 +36,7 @@
 #include <linux/pinctrl/pinctrl-state.h>
 #include <linux/regulator/consumer.h>
 
-#include "renesas_sdhi.h"
+#include "tmio_mmc_sdhi.h"
 #include "tmio_mmc.h"
 
 #define HOST_MODE		0xe4
diff --git a/drivers/mmc/host/renesas_sdhi.h b/drivers/mmc/host/tmio_mmc_sdhi.h
similarity index 100%
rename from drivers/mmc/host/renesas_sdhi.h
rename to drivers/mmc/host/tmio_mmc_sdhi.h
diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/tmio_mmc_sdhi_internal_dmac.c
similarity index 99%
rename from drivers/mmc/host/renesas_sdhi_internal_dmac.c
rename to drivers/mmc/host/tmio_mmc_sdhi_internal_dmac.c
index d032bd6..2757a6b 100644
--- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c
+++ b/drivers/mmc/host/tmio_mmc_sdhi_internal_dmac.c
@@ -21,7 +21,7 @@
 #include <linux/scatterlist.h>
 #include <linux/sys_soc.h>
 
-#include "renesas_sdhi.h"
+#include "tmio_mmc_sdhi.h"
 #include "tmio_mmc.h"
 
 #define DM_CM_DTRAN_MODE	0x820
diff --git a/drivers/mmc/host/renesas_sdhi_sys_dmac.c b/drivers/mmc/host/tmio_mmc_sdhi_sys_dmac.c
similarity index 99%
rename from drivers/mmc/host/renesas_sdhi_sys_dmac.c
rename to drivers/mmc/host/tmio_mmc_sdhi_sys_dmac.c
index 4bb46c4..c21fca1 100644
--- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c
+++ b/drivers/mmc/host/tmio_mmc_sdhi_sys_dmac.c
@@ -23,7 +23,7 @@
 #include <linux/scatterlist.h>
 #include <linux/sys_soc.h>
 
-#include "renesas_sdhi.h"
+#include "tmio_mmc_sdhi.h"
 #include "tmio_mmc.h"
 
 #define TMIO_MMC_MIN_DMA_LEN 8
-- 
2.7.4