[PATCH] media: dvb-frontends: add LNBH29 LNB supply driver

[Katsuhiro Suzuki]

Add support for STMicroelectronics LNBH29 LNB supply driver.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@xxxxxxxxxxxxx>
---
 drivers/media/dvb-frontends/Kconfig  |  10 ++
 drivers/media/dvb-frontends/Makefile |   1 +
 drivers/media/dvb-frontends/lnbh29.c | 170 +++++++++++++++++++++++++++
 drivers/media/dvb-frontends/lnbh29.h |  36 ++++++
 4 files changed, 217 insertions(+)
 create mode 100644 drivers/media/dvb-frontends/lnbh29.c
 create mode 100644 drivers/media/dvb-frontends/lnbh29.h

diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig
index 048285134cdf..847da72d1256 100644
--- a/drivers/media/dvb-frontends/Kconfig
+++ b/drivers/media/dvb-frontends/Kconfig
@@ -791,6 +791,16 @@ config DVB_LNBH25
 	  An SEC control chip.
 	  Say Y when you want to support this chip.
 
+config DVB_LNBH29
+	tristate "LNBH29 SEC controller"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  LNB power supply and control voltage
+	  regulator chip with step-up converter
+	  and I2C interface for STMicroelectronics LNBH29.
+	  Say Y when you want to support this chip.
+
 config DVB_LNBP21
 	tristate "LNBP21/LNBH24 SEC controllers"
 	depends on DVB_CORE && I2C
diff --git a/drivers/media/dvb-frontends/Makefile b/drivers/media/dvb-frontends/Makefile
index 779dfd027b24..e9179162658c 100644
--- a/drivers/media/dvb-frontends/Makefile
+++ b/drivers/media/dvb-frontends/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_DVB_LGDT3306A) += lgdt3306a.o
 obj-$(CONFIG_DVB_LG2160) += lg2160.o
 obj-$(CONFIG_DVB_CX24123) += cx24123.o
 obj-$(CONFIG_DVB_LNBH25) += lnbh25.o
+obj-$(CONFIG_DVB_LNBH29) += lnbh29.o
 obj-$(CONFIG_DVB_LNBP21) += lnbp21.o
 obj-$(CONFIG_DVB_LNBP22) += lnbp22.o
 obj-$(CONFIG_DVB_ISL6405) += isl6405.o
diff --git a/drivers/media/dvb-frontends/lnbh29.c b/drivers/media/dvb-frontends/lnbh29.c
new file mode 100644
index 000000000000..5cc08c70e64a
--- /dev/null
+++ b/drivers/media/dvb-frontends/lnbh29.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Driver for LNB supply and control IC STMicroelectronics LNBH29
+//
+// Copyright (c) 2018 Socionext Inc.
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include <media/dvb_frontend.h>
+#include "lnbh29.h"
+
+/**
+ * struct lnbh29_priv - LNBH29 driver private data
+ * @i2c:         Pointer to the I2C adapter structure
+ * @i2c_address: I2C address of LNBH29 chip
+ * @config:      Registers configuration
+ *               offset 0: 1st register address, always 0x01 (DATA)
+ *               offset 1: DATA register value
+ */
+struct lnbh29_priv {
+	struct i2c_adapter *i2c;
+	u8 i2c_address;
+	u8 config[2];
+};
+
+#define LNBH29_STATUS_OLF     BIT(0)
+#define LNBH29_STATUS_OTF     BIT(1)
+#define LNBH29_STATUS_VMON    BIT(2)
+#define LNBH29_STATUS_PNG     BIT(3)
+#define LNBH29_STATUS_PDO     BIT(4)
+#define LNBH29_VSEL_MASK      GENMASK(2, 0)
+#define LNBH29_VSEL_0         0x00
+#define LNBH29_VSEL_13        0x03
+#define LNBH29_VSEL_18        0x07
+
+static int lnbh29_read_vmon(struct lnbh29_priv *priv)
+{
+	u8 addr = 0x00;
+	u8 status[2];
+	int i, ret;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = priv->i2c_address,
+			.flags = 0,
+			.len = 1,
+			.buf = &addr
+		}, {
+			.addr = priv->i2c_address,
+			.flags = I2C_M_RD,
+			.len = sizeof(status),
+			.buf = status
+		}
+	};
+
+	for (i = 0; i < ARRAY_SIZE(msg); i++) {
+		ret = i2c_transfer(priv->i2c, &msg[i], 1);
+		if (ret >= 0 && ret != 1)
+			ret = -EIO;
+		if (ret < 0) {
+			dev_dbg(&priv->i2c->dev,
+				"LNBH29 I2C transfer %d failed (%d)\n",
+				i, ret);
+			return ret;
+		}
+	}
+
+	if (status[0] & (LNBH29_STATUS_OLF | LNBH29_STATUS_VMON)) {
+		dev_err(&priv->i2c->dev,
+			"LNBH29 voltage in failure state, status reg 0x%x\n",
+			status[0]);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int lnbh29_set_voltage(struct dvb_frontend *fe,
+			      enum fe_sec_voltage voltage)
+{
+	struct lnbh29_priv *priv = fe->sec_priv;
+	u8 data_reg;
+	int ret;
+	struct i2c_msg msg = {
+		.addr = priv->i2c_address,
+		.flags = 0,
+		.len = sizeof(priv->config),
+		.buf = priv->config
+	};
+
+	switch (voltage) {
+	case SEC_VOLTAGE_OFF:
+		data_reg = LNBH29_VSEL_0;
+		break;
+	case SEC_VOLTAGE_13:
+		data_reg = LNBH29_VSEL_13;
+		break;
+	case SEC_VOLTAGE_18:
+		data_reg = LNBH29_VSEL_18;
+		break;
+	default:
+		return -EINVAL;
+	}
+	priv->config[1] &= ~LNBH29_VSEL_MASK;
+	priv->config[1] |= data_reg;
+
+	ret = i2c_transfer(priv->i2c, &msg, 1);
+	if (ret >= 0 && ret != 1)
+		ret = -EIO;
+	if (ret < 0) {
+		dev_err(&priv->i2c->dev, "LNBH29 I2C transfer error (%d)\n",
+			ret);
+		return ret;
+	}
+
+	/* Soft-start time (Vout 0V to 18V) is Typ. 6ms. */
+	usleep_range(6000, 20000);
+
+	if (voltage == SEC_VOLTAGE_OFF)
+		return 0;
+
+	return lnbh29_read_vmon(priv);
+}
+
+static void lnbh29_release(struct dvb_frontend *fe)
+{
+	lnbh29_set_voltage(fe, SEC_VOLTAGE_OFF);
+	kfree(fe->sec_priv);
+	fe->sec_priv = NULL;
+}
+
+struct dvb_frontend *lnbh29_attach(struct dvb_frontend *fe,
+				   struct lnbh29_config *cfg,
+				   struct i2c_adapter *i2c)
+{
+	struct lnbh29_priv *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return NULL;
+
+	priv->i2c_address = (cfg->i2c_address >> 1);
+	priv->i2c = i2c;
+	priv->config[0] = 0x01;
+	priv->config[1] = cfg->data_config;
+	fe->sec_priv = priv;
+
+	if (lnbh29_set_voltage(fe, SEC_VOLTAGE_OFF)) {
+		dev_err(&i2c->dev, "no LNBH29 found at I2C addr 0x%02x\n",
+			priv->i2c_address);
+		kfree(priv);
+		fe->sec_priv = NULL;
+		return NULL;
+	}
+
+	fe->ops.release_sec = lnbh29_release;
+	fe->ops.set_voltage = lnbh29_set_voltage;
+
+	dev_info(&i2c->dev, "LNBH29 attached at I2C addr 0x%02x\n",
+		 priv->i2c_address);
+
+	return fe;
+}
+EXPORT_SYMBOL(lnbh29_attach);
+
+MODULE_AUTHOR("Katsuhiro Suzuki <suzuki.katsuhiro@xxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("STMicroelectronics LNBH29 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/dvb-frontends/lnbh29.h b/drivers/media/dvb-frontends/lnbh29.h
new file mode 100644
index 000000000000..6179921520d9
--- /dev/null
+++ b/drivers/media/dvb-frontends/lnbh29.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Driver for LNB supply and control IC STMicroelectronics LNBH29
+ *
+ * Copyright (c) 2018 Socionext Inc.
+ */
+
+#ifndef LNBH29_H
+#define LNBH29_H
+
+#include <linux/i2c.h>
+#include <linux/dvb/frontend.h>
+
+/* Using very low E.S.R. capacitors or ceramic caps */
+#define LNBH29_DATA_COMP    BIT(3)
+
+struct lnbh29_config {
+	u8 i2c_address;
+	u8 data_config;
+};
+
+#if IS_REACHABLE(CONFIG_DVB_LNBH29)
+struct dvb_frontend *lnbh29_attach(struct dvb_frontend *fe,
+				   struct lnbh29_config *cfg,
+				   struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend *lnbh29_attach(struct dvb_frontend *fe,
+						 struct lnbh29_config *cfg,
+						 struct i2c_adapter *i2c)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
+#endif
-- 
2.18.0