Re: [PATCH v2] Documentation: dt-bindings: Explicitly mark Samsung Exynos SoC bindings as unstable

[Bartlomiej Zolnierkiewicz]

On Monday, May 28, 2018 09:13:27 PM Krzysztof Kozlowski wrote:
> From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> 
> Samsung Exynos SoCs and boards related bindings evolved since the initial
> introduction, but initially the bindings were minimal and a bit incomplete
> (they never described all the hardware modules available in the SoCs).
> Since then some significant (not fully compatible) changes have been
> already committed a few times (like gpio replaced by pinctrl, display ddc,
> mfc reserved memory, some core clocks added to various hardware modules,
> added more required nodes).
> 
> On the other side there are no boards which have device tree embedded in
> the bootloader. Device tree blob is always compiled from the kernel tree
> and updated together with the kernel image.
> 
> Thus to avoid further adding a bunch of workarounds for old/missing
> bindings, make development of new platforms easier and allow to make
> cleanup of the existing code and device tree files, lets mark some
> Samsung Exynos SoC platform bindings as unstable. This means that
> bindings can may change at any time and users should use the dtb file
> compiled from the same kernel source tree as the kernel image.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics