Re: [PATCH] arm64: dts: meson: Switch simple-mfd and syscon order

[Neil Armstrong]

Hi,

On 26/07/2018 16:41, Yixun Lan wrote:
> HI Neil
> 
> On 07/26/2018 10:13 PM, Neil Armstrong wrote:
>> The order between "syscon" and "simple-mfd" is important because in these
>> particular cases, the node needs to be first a "simple-mfd" to expose
>> it's sub-nodes, and later on a "syscon" to permit other nodes to access
>> this register space through the "syscon" mechanism.
>>
> 
> could you explain a bit which specific case that it need compatible
> "simple-mfd" come first? is this a problem in kernel side? because I see
> you have a comment below about problem in U-Boot..

It's not a problem for Linux, but Linux is just an implementation, the device tree
should work on multiple OSs like U-Boot or BSD kernels. We should base ourselves on
the bindings documentation and the Device tree specification to specify the HW.

In this case, we need to switch the order to specify it correctly.

> 
> 
> also while Rob review the mmc-clkc patch, he raise a suggestion to  drop
> "syscon" in drivers/mfd/syscon.c, see [1], will that solve or affect
> your problem?

Rob wants us to drop the "syscon" because he wants us to move all nodes
depending of HHI as subnode, which is impossible for HDMI and the VPU power controller,
they are only "syscon" clients, their own registers are not in HHI.

Neil

> 
> [1]
> https://lkml.kernel.org/r/CAL_Jsq+r+7BaJAPBn3L26sdxATVyDiuC=V3xE+yz0-27q0RJhA@xxxxxxxxxxxxxx
> 
>> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>> ---
>> This also has a consequence for U-Boot since the U-Boot DM is much simpler
>> and can only associate a single device to a node, thus here we want these
>> nodes to be an mfd bus to be able to probe the sub-nodes.
>>
>>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
>>  arch/arm64/boot/dts/amlogic/meson-gx.dtsi  | 4 ++--
>>  2 files changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> index 6adc8d3..3f0de9d 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> @@ -342,7 +342,7 @@
>>  			ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
>>  
>>  			sysctrl: system-controller@0 {
>> -				compatible = "amlogic,meson-axg-hhi-sysctrl", "syscon", "simple-mfd";
>> +				compatible = "amlogic,meson-axg-hhi-sysctrl", "simple-mfd", "syscon";
>>  				reg = <0 0 0 0x400>;
>>  
>>  				clkc: clock-controller {
>> @@ -1180,7 +1180,7 @@
>>  			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
>>  
>>  			sysctrl_AO: sys-ctrl@0 {
>> -				compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd";
>> +				compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon";
>>  				reg =  <0x0 0x0 0x0 0x100>;
>>  
>>  				clkc_AO: clock-controller {
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> index b8dc4db..d88699f 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> @@ -344,7 +344,7 @@
>>  			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
>>  
>>  			sysctrl_AO: sys-ctrl@0 {
>> -				compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
>> +				compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
>>  				reg =  <0x0 0x0 0x0 0x100>;
>>  
>>  				pwrc_vpu: power-controller-vpu {
>> @@ -431,7 +431,7 @@
>>  			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
>>  
>>  			sysctrl: system-controller@0 {
>> -				compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
>> +				compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
>>  				reg = <0 0 0 0x400>;
>>  			};
>>  
>>
>