[PATCH 3/3] ptp_qoriq: convert to use module parameters for initialization
From: Yangbo Lu
Date: Mon Jul 30 2018 - 06:15:00 EST
The ptp_qoriq driver initialized the 1588 timer with the
configurations provided by the properties of device tree
node. For example,
fsl,tclk-period = <5>;
fsl,tmr-prsc = <2>;
fsl,tmr-add = <0xaaaaaaab>;
fsl,tmr-fiper1 = <999999995>;
fsl,tmr-fiper2 = <99990>;
fsl,max-adj = <499999999>;
These things actually were runtime configurations which
were not proper to be put into dts. This patch is to convert
to use module parameters for 1588 timer initialization, and
to support initial register values calculation.
If the parameters are not provided, the driver will calculate
register values with a set of default parameters. With this
patch, those dts properties are no longer needed for new
platform to support 1588 timer, and many QorIQ DPAA platforms
(some P series and T series platforms of PowerPC, and some
LS series platforms of ARM64) could use this driver for their
fman ptp timer with default module parameters. However, this
patch didn't remove the dts method. Because there were still
many old platforms using the dts method. We need to clean up
their dts files, verify module parameters on them, and convert
them to the new method gradually in case of breaking any
function.
Signed-off-by: Yangbo Lu <yangbo.lu@xxxxxxx>
---
drivers/ptp/ptp_qoriq.c | 117 +++++++++++++++++++++++++++++++++++++++-
include/linux/fsl/ptp_qoriq.h | 1 +
2 files changed, 115 insertions(+), 3 deletions(-)
diff --git a/drivers/ptp/ptp_qoriq.c b/drivers/ptp/ptp_qoriq.c
index a14c317..22baf83 100644
--- a/drivers/ptp/ptp_qoriq.c
+++ b/drivers/ptp/ptp_qoriq.c
@@ -29,9 +29,30 @@
#include <linux/of_platform.h>
#include <linux/timex.h>
#include <linux/slab.h>
+#include <linux/clk.h>
#include <linux/fsl/ptp_qoriq.h>
+static unsigned int cksel = DEFAULT_CKSEL;
+module_param(cksel, uint, 0644);
+MODULE_PARM_DESC(cksel, "Select reference clock");
+
+static unsigned int clk_src;
+module_param(clk_src, uint, 0644);
+MODULE_PARM_DESC(clk_src, "Reference clock frequency (if clocks property not provided in dts)");
+
+static unsigned int tmr_prsc = 2;
+module_param(tmr_prsc, uint, 0644);
+MODULE_PARM_DESC(tmr_prsc, "Output clock division/prescale factor");
+
+static unsigned int tmr_fiper1 = 1000000000;
+module_param(tmr_fiper1, uint, 0644);
+MODULE_PARM_DESC(tmr_fiper1, "Desired fixed interval pulse period (ns)");
+
+static unsigned int tmr_fiper2 = 100000;
+module_param(tmr_fiper2, uint, 0644);
+MODULE_PARM_DESC(tmr_fiper2, "Desired fixed interval pulse period (ns)");
+
/*
* Register access functions
*/
@@ -317,6 +338,91 @@ static int ptp_qoriq_enable(struct ptp_clock_info *ptp,
.enable = ptp_qoriq_enable,
};
+/**
+ * qoriq_ptp_nominal_freq - calculate nominal frequency by reference clock
+ * frequency
+ *
+ * @clk_src: reference clock frequency
+ *
+ * The nominal frequency is the desired clock frequency.
+ * It should be less than the reference clock frequency.
+ * It should be a factor of 1000MHz.
+ *
+ * Return the nominal frequency
+ */
+static u32 qoriq_ptp_nominal_freq(u32 clk_src)
+{
+ u32 remainder = 0;
+
+ clk_src /= 1000000;
+ remainder = clk_src % 100;
+ if (remainder) {
+ clk_src -= remainder;
+ clk_src += 100;
+ }
+
+ do {
+ clk_src -= 100;
+
+ } while (1000 % clk_src);
+
+ return clk_src * 1000000;
+}
+
+static int qoriq_ptp_config(struct qoriq_ptp *qoriq_ptp,
+ struct device_node *node)
+{
+ struct clk *clk;
+ u64 freq_comp;
+ u64 max_adj;
+ u32 nominal_freq;
+
+ qoriq_ptp->cksel = cksel;
+
+ if (clk_src) {
+ qoriq_ptp->clk_src = clk_src;
+ } else {
+ clk = of_clk_get(node, 0);
+ if (!IS_ERR(clk)) {
+ qoriq_ptp->clk_src = clk_get_rate(clk);
+ clk_put(clk);
+ }
+ }
+
+ if (qoriq_ptp->clk_src <= 100000000UL) {
+ pr_err("error reference clock value, or lower than 100MHz\n");
+ return -EINVAL;
+ }
+
+ nominal_freq = qoriq_ptp_nominal_freq(qoriq_ptp->clk_src);
+ if (!nominal_freq)
+ return -EINVAL;
+
+ qoriq_ptp->tclk_period = 1000000000UL / nominal_freq;
+ qoriq_ptp->tmr_prsc = tmr_prsc;
+
+ /* Calculate initial frequency compensation value for TMR_ADD register.
+ * freq_comp = ceil(2^32 / freq_ratio)
+ * freq_ratio = reference_clock_freq / nominal_freq
+ */
+ freq_comp = ((u64)1 << 32) * nominal_freq;
+ if (do_div(freq_comp, qoriq_ptp->clk_src))
+ freq_comp++;
+
+ qoriq_ptp->tmr_add = freq_comp;
+ qoriq_ptp->tmr_fiper1 = tmr_fiper1 - qoriq_ptp->tclk_period;
+ qoriq_ptp->tmr_fiper2 = tmr_fiper2 - qoriq_ptp->tclk_period;
+
+ /* max_adj = 1000000000 * (freq_ratio - 1.0) - 1
+ * freq_ratio = reference_clock_freq / nominal_freq
+ */
+ max_adj = 1000000000ULL * (qoriq_ptp->clk_src - nominal_freq);
+ max_adj = max_adj / nominal_freq - 1;
+ qoriq_ptp->caps.max_adj = max_adj;
+
+ return 0;
+}
+
static int qoriq_ptp_probe(struct platform_device *dev)
{
struct device_node *node = dev->dev.of_node;
@@ -332,7 +438,7 @@ static int qoriq_ptp_probe(struct platform_device *dev)
if (!qoriq_ptp)
goto no_memory;
- err = -ENODEV;
+ err = -EINVAL;
qoriq_ptp->caps = ptp_qoriq_caps;
@@ -351,10 +457,14 @@ static int qoriq_ptp_probe(struct platform_device *dev)
"fsl,tmr-fiper2", &qoriq_ptp->tmr_fiper2) ||
of_property_read_u32(node,
"fsl,max-adj", &qoriq_ptp->caps.max_adj)) {
- pr_err("device tree node missing required elements\n");
- goto no_node;
+ pr_warn("device tree node missing required elements, try module param\n");
+
+ if (qoriq_ptp_config(qoriq_ptp, node))
+ goto no_param;
}
+ err = -ENODEV;
+
qoriq_ptp->irq = platform_get_irq(dev, 0);
if (qoriq_ptp->irq < 0) {
@@ -436,6 +546,7 @@ static int qoriq_ptp_probe(struct platform_device *dev)
release_resource(qoriq_ptp->rsrc);
no_resource:
free_irq(qoriq_ptp->irq, qoriq_ptp);
+no_param:
no_node:
kfree(qoriq_ptp);
no_memory:
diff --git a/include/linux/fsl/ptp_qoriq.h b/include/linux/fsl/ptp_qoriq.h
index dc3dac4..586d430 100644
--- a/include/linux/fsl/ptp_qoriq.h
+++ b/include/linux/fsl/ptp_qoriq.h
@@ -147,6 +147,7 @@ struct qoriq_ptp {
u32 cksel;
u32 tmr_fiper1;
u32 tmr_fiper2;
+ u32 clk_src;
};
static inline u32 qoriq_read(unsigned __iomem *addr)
--
1.7.1