Re: [PATCH v2] arch/x86: Fix boot_cpu_data.microcode version output

From: Sironi, Filippo
Date: Tue Jul 31 2018 - 07:50:02 EST



> On 31. Jul 2018, at 13:27, Prarit Bhargava <prarit@xxxxxxxxxx> wrote:
>
> I tested this on AMD Ryzen & Intel Broadwell system and dumped the
> boot_cpu_data before and after a microcode update. On the Intel
> system I also did a fatal MCE using mce-inject to confirm the output
> from the mce handling code.
>
> P.
>
> ---8<---
>
> On systems where a runtime microcode update has occurred the microcode
> version output in a MCE log record is wrong because
> boot_cpu_data.microcode is not updated during runtime.
>
> Update boot_cpu_data.microcode when the BSP's microcode is updated.
>
> Fixes: fa94d0c6e0f3 ("x86/MCE: Save microcode revision in machine check records")
> Suggested-by: Borislav Petkov <bp@xxxxxxxxxx>
> Signed-off-by: Prarit Bhargava <prarit@xxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
> Cc: sironi@xxxxxxxxx
> Cc: tony.luck@xxxxxxxxx
> ---
> Changes in v2: Use mc_amd->hdr.patch_id on AMD
>
> arch/x86/kernel/cpu/microcode/amd.c | 4 ++++
> arch/x86/kernel/cpu/microcode/intel.c | 4 ++++
> 2 files changed, 8 insertions(+)
>
> diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
> index 0624957aa068..63b072377ba4 100644
> --- a/arch/x86/kernel/cpu/microcode/amd.c
> +++ b/arch/x86/kernel/cpu/microcode/amd.c
> @@ -537,6 +537,10 @@ static enum ucode_state apply_microcode_amd(int cpu)
> uci->cpu_sig.rev = mc_amd->hdr.patch_id;
> c->microcode = mc_amd->hdr.patch_id;
>
> + /* Update boot_cpu_data's revision too, if we're on the BSP: */
> + if (c->cpu_index == boot_cpu_data.cpu_index)
> + boot_cpu_data.microcode = mc_amd->hdr.patch_id;
> +
> return UCODE_UPDATED;
> }
>
> diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c
> index 97ccf4c3b45b..256d336cbc04 100644
> --- a/arch/x86/kernel/cpu/microcode/intel.c
> +++ b/arch/x86/kernel/cpu/microcode/intel.c
> @@ -851,6 +851,10 @@ static enum ucode_state apply_microcode_intel(int cpu)
> uci->cpu_sig.rev = rev;
> c->microcode = rev;
>
> + /* Update boot_cpu_data's revision too, if we're on the BSP: */
> + if (c->cpu_index == boot_cpu_data.cpu_index)
> + boot_cpu_data.microcode = rev;
> +
> return UCODE_UPDATED;
> }

There may be a chance of skipping this code, I think.

If the microcode is loaded on the hyperthread sibling of the boot cpu
before being loaded on the boot cpu, the boot cpu will exit earlier
from apply_microcode_intel() - in if (rev >= mc->hdr.rev) { ... }.

(This seems to be possible in apply_microcode_amd() as well.)

In my tree with the aforementioned change - Intel only - I also had
the following patch:

diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c
index 97ccf4c3b45b..4bc869e829eb 100644
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -797,6 +797,7 @@ static enum ucode_state apply_microcode_intel(int cpu)
struct microcode_intel *mc;
static int prev_rev;
u32 rev;
+ enum ucode_state ret;

/* We should bind the task to the CPU */
if (WARN_ON(raw_smp_processor_id() != cpu))
@@ -817,9 +818,8 @@ static enum ucode_state apply_microcode_intel(int cpu)
*/
rev = intel_get_microcode_revision();
if (rev >= mc->hdr.rev) {
- uci->cpu_sig.rev = rev;
- c->microcode = rev;
- return UCODE_OK;
+ ret = UCODE_OK;
+ goto out;
}

/*
@@ -848,10 +848,12 @@ static enum ucode_state apply_microcode_intel(int cpu)
prev_rev = rev;
}

+ ret = UCODE_UPDATED;
+out:
uci->cpu_sig.rev = rev;
c->microcode = rev;

- return UCODE_UPDATED;
+ return ret;
}

static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,

which prevents the issue.

> --
> 2.17.0
>
>

Amazon Development Center Germany GmbH
Berlin - Dresden - Aachen
main office: Krausenstr. 38, 10117 Berlin
Geschaeftsfuehrer: Dr. Ralf Herbrich, Christian Schlaeger
Ust-ID: DE289237879
Eingetragen am Amtsgericht Charlottenburg HRB 149173 B