[PATCH v4 3/4] power: bq25890_charger.c: Add the BQ25896 part
From: Angus Ainslie (Purism)
Date: Tue Jul 31 2018 - 13:49:51 EST
The BQ25896 is almost identical to the BQ25890.
Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Signed-off-by: Angus Ainslie (Purism) <angus@xxxxxxxx>
---
.../bindings/power/supply/bq25890.txt | 3 +++
drivers/power/supply/bq25890_charger.c | 24 +++++++++++++++----
2 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt
index c9dd17d142ad..dc0568933359 100644
--- a/Documentation/devicetree/bindings/power/supply/bq25890.txt
+++ b/Documentation/devicetree/bindings/power/supply/bq25890.txt
@@ -1,5 +1,8 @@
Binding for TI bq25890 Li-Ion Charger
+This driver will support the bq25896 and the bq25890. There are other ICs
+in the same family but those have not been tested.
+
Required properties:
- compatible: Should contain one of the following:
* "ti,bq25890"
diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index ca61278e932e..23b39da07e56 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -32,6 +32,7 @@
#define BQ25890_IRQ_PIN "bq25890_irq"
#define BQ25890_ID 3
+#define BQ25896_ID 0
enum bq25890_fields {
F_EN_HIZ, F_EN_ILIM, F_IILIM, /* Reg00 */
@@ -153,8 +154,8 @@ static const struct reg_field bq25890_reg_fields[] = {
[F_CONV_RATE] = REG_FIELD(0x02, 6, 6),
[F_BOOSTF] = REG_FIELD(0x02, 5, 5),
[F_ICO_EN] = REG_FIELD(0x02, 4, 4),
- [F_HVDCP_EN] = REG_FIELD(0x02, 3, 3),
- [F_MAXC_EN] = REG_FIELD(0x02, 2, 2),
+ [F_HVDCP_EN] = REG_FIELD(0x02, 3, 3), // reserved on BQ25896
+ [F_MAXC_EN] = REG_FIELD(0x02, 2, 2), // reserved on BQ25896
[F_FORCE_DPM] = REG_FIELD(0x02, 1, 1),
[F_AUTO_DPDM_EN] = REG_FIELD(0x02, 0, 0),
/* REG03 */
@@ -163,6 +164,7 @@ static const struct reg_field bq25890_reg_fields[] = {
[F_OTG_CFG] = REG_FIELD(0x03, 5, 5),
[F_CHG_CFG] = REG_FIELD(0x03, 4, 4),
[F_SYSVMIN] = REG_FIELD(0x03, 1, 3),
+ /* MIN_VBAT_SEL on BQ25896 */
/* REG04 */
[F_PUMPX_EN] = REG_FIELD(0x04, 7, 7),
[F_ICHG] = REG_FIELD(0x04, 0, 6),
@@ -181,7 +183,7 @@ static const struct reg_field bq25890_reg_fields[] = {
[F_CHG_TMR] = REG_FIELD(0x07, 1, 2),
[F_JEITA_ISET] = REG_FIELD(0x07, 0, 0),
/* REG08 */
- [F_BATCMP] = REG_FIELD(0x08, 6, 7),
+ [F_BATCMP] = REG_FIELD(0x08, 6, 7), // 5-7 on BQ25896
[F_VCLAMP] = REG_FIELD(0x08, 2, 4),
[F_TREG] = REG_FIELD(0x08, 0, 1),
/* REG09 */
@@ -195,12 +197,13 @@ static const struct reg_field bq25890_reg_fields[] = {
[F_PUMPX_DN] = REG_FIELD(0x09, 0, 0),
/* REG0A */
[F_BOOSTV] = REG_FIELD(0x0A, 4, 7),
+ /* PFM_OTG_DIS 3 on BQ25896 */
[F_BOOSTI] = REG_FIELD(0x0A, 0, 2),
/* REG0B */
[F_VBUS_STAT] = REG_FIELD(0x0B, 5, 7),
[F_CHG_STAT] = REG_FIELD(0x0B, 3, 4),
[F_PG_STAT] = REG_FIELD(0x0B, 2, 2),
- [F_SDP_STAT] = REG_FIELD(0x0B, 1, 1),
+ [F_SDP_STAT] = REG_FIELD(0x0B, 1, 1), // reserved on BQ25896
[F_VSYS_STAT] = REG_FIELD(0x0B, 0, 0),
/* REG0C */
[F_WD_FAULT] = REG_FIELD(0x0C, 7, 7),
@@ -396,6 +399,16 @@ static int bq25890_power_supply_get_property(struct power_supply *psy,
val->strval = BQ25890_MANUFACTURER;
break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ if (bq->chip_id == BQ25890_ID)
+ val->strval = "BQ25890";
+ else if (bq->chip_id == BQ25896_ID)
+ val->strval = "BQ25896";
+ else
+ val->strval = "UNKNOWN";
+
+ break;
+
case POWER_SUPPLY_PROP_ONLINE:
val->intval = state.online;
break;
@@ -647,6 +660,7 @@ static int bq25890_hw_init(struct bq25890_device *bq)
static enum power_supply_property bq25890_power_supply_props[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_HEALTH,
@@ -848,7 +862,7 @@ static int bq25890_probe(struct i2c_client *client,
return bq->chip_id;
}
- if (bq->chip_id != BQ25890_ID) {
+ if ((bq->chip_id != BQ25890_ID) && (bq->chip_id != BQ25896_ID)) {
dev_err(dev, "Chip with ID=%d, not supported!\n", bq->chip_id);
return -ENODEV;
}
--
2.17.1