Re: [PATCH v2] arm64: dts: rockchip: add support for ROC-RK3399-PC board

[Rob Herring]

On Mon, Jul 30, 2018 at 10:12:01AM +0800, djw@xxxxxxxxxxxxx wrote:
> From: Levin Du <djw@xxxxxxxxxxxxx>
> 
> ROC-RK3399-PC is a power efficient 4GB LPDDR4 single board
> computer with USB 3.0 and Gigabit Ethernet in a form factor
> compatible with the Raspberry Pi. It is based on the Rockchip
> RK3399 SoC, powered by the Type-C port.
> 
> The devicetree currently supports peripherals of:
> 
> - Ethernet
> - HDMI
> - SD Card
> - UART2 debug
> - Type-C
> - eMMC
> 
> USB3 in Type-C port currently only works with normal orientation,
> not flip one.
> 
> Signed-off-by: Levin Du <djw@xxxxxxxxxxxxx>
> 
> ---
> 
> Changes in v2:
> - remove custom brightness-levels (use calculated one in pwm_bl driver)
> - remove redundant 'dr_mode="otg"' in usbdrd_dwc3_0
> 
> Changes in v1:
> - remove bootargs
> - use interpolation for brightness level
> - add vcc_vbus_typec1 regulator
> - fix phy-supply of u2phy0_otg and u2phy1_otg
> - remove vcc_hub_en dummy regualtor
> - add hub_rst (changed to output high) to pinctrl status of vcc5v0_host
> - remove vsel-gpios props in fan53xx
> - remove mp8859 in i2c
> - fusb302: fix interrupt setting
> - fusb302: add vbus-supply
> - remove extcon in tcphy0 and tcphy1
> - remove #sound-dai-cells in i2s*
> - use RK_PXX style bit number for cd-gpios in SDMMC
> - clean commented status lines
> 
>  Documentation/devicetree/bindings/arm/rockchip.txt |   4 +
>  arch/arm64/boot/dts/rockchip/Makefile              |   1 +
>  arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts     | 682 +++++++++++++++++++++
>  3 files changed, 687 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>