Re: [PATCH 1/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document

[Rob Herring]

On Wed, Jul 25, 2018 at 07:40:57AM +0200, John Crispin wrote:
> This patch adds the binding documentation for the HS/SS USB PHY found
> inside Qualcom Dakota SoCs.

Qualcomm

> 
> Cc: Rob Herring <robh@xxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: John Crispin <john@xxxxxxxxxxx>
> ---
>  .../bindings/phy/phy-qcom-ipq4019-usb.txt           | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
> new file mode 100644
> index 000000000000..362877fcafed
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
> @@ -0,0 +1,21 @@
> +Qualcom Dakota HS/SS USB PHY
> +
> +Required properties:
> + - compatible: "qcom,usb-ss-ipq4019-phy",
> +	       "qcom,usb-hs-ipq4019-phy"

<vendor>,<soc>-<block> is the usual order.

> + - reg: offset and length of the registers
> + - #phy-cells: should be 0
> + - resets: the reset controllers as listed below
> + - reset-names: the names of the reset controllers
> +	"por_rst" - the POR reset line for SS and HS phys
> +	"srif_rst" - the SRIF reset line for HS phys

'_rst' is redundant.

> +Example:
> +
> +hsphy@a8000 {

usb-phy@...

> +	compatible = "qcom,usb-hs-ipq4019-phy";
> +	phy-cells = <0>;
> +	reg = <0xa8000 0x40>;
> +	resets = <&gcc USB2_HSPHY_POR_ARES>,
> +		 <&gcc USB2_HSPHY_S_ARES>;
> +	reset-names = "por_rst", "srif_rst";
> +};
> -- 
> 2.11.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html