Re: [PATCH 00/31] Introduced new Cadence USBSSP DRD Driver

[Roger Quadros]

Hi Pawel,

On 19/07/18 20:57, Pawel Laszczak wrote:
> This patch set introduce new Cadence USBSSP DRD driver
> to linux kernel.
> 
> The Cadence USBSSP DRD Driver s a highly
> configurable IP Core which can be
> instantiated as Dual-Role Device (DRD),
> Peripheral Only and Host Only (XHCI)
> configurations.
> 
> The current driver has been validated with
> FPGA burned. We have support for PCIe
> bus, which is used on FPGA prototyping.
> 
> The host site of USBSSP controller is compliance
> with XHCI specification, so it works with
> standard XHCI linux driver.
> 
> Also, device side of USBSSP controller was designed
> in such way to looks like XHCI. It means that
> most of logic of USBSSP controller is also compliance
> with XHCI specification.
> 
> Consequently, the USBSSP driver for peripheral mode
> is very similar to XHCI driver.
> 
> This version of driver supports only Device mode but
> DRD and Host mode will be added in the future.
> 

Based on the posting date this series looks like v3.

You should add the version prefix to the patches next time.
e.g. [PATCH v4 ...]

It is also recommended to add a Change-log in the cover letter
explaining what changes were made in each revision.

There are a bunch of checkpatch warnings in this series.
You can use ./scripts/checkpatch.pl on the patches and fix the
issues.

> ---
> 
> Pawel Laszczak (31):
>   usb: usbssp: Defined register maps and other useful structures.
>   usb: usbssp: Added some decoding functions.
>   usb: usbssp: Add trace events used in driver
>   usb: usbssp: Added USBSSP platform driver
>   usb: usbssp: Added first part of initialization sequence.
>   usb: usbssp: added template functions used by upper layer.
>   usb: usbssp: Initialization - added usbssp_mem_init
>   usb: usbssp: Added ring and segment handling functions.
>   usb: usbssp: add implementation of usbssp_mem_cleanup
>   usb: usbssp: added usbssp_trb_in_td function.
>   usb: usbssp: added function for stopping driver.
>   usb: usbssp: added functions for queuing commands.
>   usb: usbssp: addec procedure for handlin Port Status Change events.
>   usb: usbssp: added procedure handling command completion events.
>   usb: usbssp: added device controller error, transfer and SETUP
>     completion event.
>   usb: usbssp: added connect/disconnect procedures.
>   usb: usbssp: added implementation of usbssp_halt_endpoint function.
>   usb: usbssp: added handling of Port Reset event.
>   usb: usbssp: added support for USB enumeration process.
>   usb: usbssp: added queuing procedure for control transfer.
>   usb: usbssp: added queuing procedure for BULK and INT transfer.
>   usb: usbssp: added procedure removing request from transfer ring
>   usb: usbssp: added implementation of transfer events.
>   usb: usbssp: added detecting command timeout.
>   usb: usbssp: added implementation of usbssp interface.
>   usb: usbssp: added endpoint configuration functionality.
>   usb: usbssp: implements usbssp_gadget_ep_enable function
>   usb: usbssp: implemented usbssp_gadget_ep_disable function.
>   usb: usbssp: added support for LPM.
>   usb: usbssp: added support for TEST_MODE.
>   usb: usbssp: add pci to platform driver wrapper.
> 
>  drivers/usb/Kconfig                  |    2 +
>  drivers/usb/Makefile                 |    2 +
>  drivers/usb/usbssp/Kconfig           |   29 +
>  drivers/usb/usbssp/Makefile          |   15 +
>  drivers/usb/usbssp/gadget-dbg.c      |   39 +
>  drivers/usb/usbssp/gadget-ep0.c      |  571 +++++
>  drivers/usb/usbssp/gadget-ext-caps.h |  102 +
>  drivers/usb/usbssp/gadget-if.c       |  569 +++++
>  drivers/usb/usbssp/gadget-mem.c      | 1938 +++++++++++++++
>  drivers/usb/usbssp/gadget-port.c     |  287 +++
>  drivers/usb/usbssp/gadget-ring.c     | 3452 ++++++++++++++++++++++++++
>  drivers/usb/usbssp/gadget-trace.c    |   13 +
>  drivers/usb/usbssp/gadget-trace.h    |  482 ++++
>  drivers/usb/usbssp/gadget.c          | 1909 ++++++++++++++
>  drivers/usb/usbssp/gadget.h          | 2373 ++++++++++++++++++
>  drivers/usb/usbssp/usbssp-pci-wrap.c |  226 ++
>  drivers/usb/usbssp/usbssp-plat.c     |  186 ++
>  17 files changed, 12195 insertions(+)
>  create mode 100644 drivers/usb/usbssp/Kconfig
>  create mode 100644 drivers/usb/usbssp/Makefile
>  create mode 100644 drivers/usb/usbssp/gadget-dbg.c
>  create mode 100644 drivers/usb/usbssp/gadget-ep0.c
>  create mode 100644 drivers/usb/usbssp/gadget-ext-caps.h
>  create mode 100644 drivers/usb/usbssp/gadget-if.c
>  create mode 100644 drivers/usb/usbssp/gadget-mem.c
>  create mode 100644 drivers/usb/usbssp/gadget-port.c
>  create mode 100644 drivers/usb/usbssp/gadget-ring.c
>  create mode 100644 drivers/usb/usbssp/gadget-trace.c
>  create mode 100644 drivers/usb/usbssp/gadget-trace.h
>  create mode 100644 drivers/usb/usbssp/gadget.c
>  create mode 100644 drivers/usb/usbssp/gadget.h
>  create mode 100644 drivers/usb/usbssp/usbssp-pci-wrap.c
>  create mode 100644 drivers/usb/usbssp/usbssp-plat.c
> 

-- 
cheers,
-roger

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki