Re: [PATCH 1/2] dt-bindings: Documentation for qcom,eud
From: Rob Herring
Date: Wed Aug 01 2018 - 10:05:03 EST
On Tue, Jul 31, 2018 at 12:22 PM Prakruthi Deepak Heragu
<pheragu@xxxxxxxxxxxxxx> wrote:
>
> Documentation for Embedded USB Debugger (EUD) device tree bindings.
If you want bindings reviewed, send them to the correct list and
people (hint: run get_maintainers.pl).
New bindings should not use extcon.
>
> Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@xxxxxxxxxxxxxx>
> Signed-off-by: Prakruthi Deepak Heragu <pheragu@xxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/soc/qcom/qcom,msm-eud.txt | 28 ++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt
> new file mode 100644
> index 0000000..ea63f1c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt
> @@ -0,0 +1,28 @@
> +* Qualcomm Technologies Inc Embedded USB Debugger (EUD)
> +
> +The EUD (Embedded USB Debugger) is a mini-USB hub implemented
> +on chip to support the USB-based debug and trace capabilities.
> +
> +Required properties:
> +
> + - compatible: Should be "qcom,msm-eud"
> + - interrupts: Interrupt number
> + - reg: Should be address and size of EUD register space
> +
> +Driver notifies clients via extcon for VBUS attach/detach
> +and charger enable/disable events. Clients registered for these
> +notifications should have extcon property set to eud.
> +
> +An example for EUD device node:
> +
> + eud: qcom,msm-eud@88e0000 {
> + compatible = "qcom,msm-eud";
> + interrupts = <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x88e0000 0x4000>;
> + };
> +
> +An example for EUD extcon client:
> +
> + usb3 {
> + extcon = <&eud>;
> + };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>