[PATCH 4.14 142/246] ARM: dts: stih407-pinctrl: Fix complain about IRQ_TYPE_NONE usage
From: Greg Kroah-Hartman
Date: Wed Aug 01 2018 - 13:19:02 EST
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Patrice Chotard <patrice.chotard@xxxxxx>
[ Upstream commit e95b8e718f9bd2386a29639dd21c633b4951dc21 ]
Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE")
kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't
be used.
Use IRQ_TYPE_LEVEL_HIGH instead.
Signed-off-by: Patrice Chotard <patrice.chotard@xxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -52,7 +52,7 @@
st,syscfg = <&syscfg_sbc>;
reg = <0x0961f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irqmux";
ranges = <0 0x09610000 0x6000>;
@@ -376,7 +376,7 @@
st,syscfg = <&syscfg_front>;
reg = <0x0920f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irqmux";
ranges = <0 0x09200000 0x10000>;
@@ -936,7 +936,7 @@
st,syscfg = <&syscfg_front>;
reg = <0x0921f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irqmux";
ranges = <0 0x09210000 0x10000>;
@@ -969,7 +969,7 @@
st,syscfg = <&syscfg_rear>;
reg = <0x0922f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irqmux";
ranges = <0 0x09220000 0x6000>;
@@ -1164,7 +1164,7 @@
st,syscfg = <&syscfg_flash>;
reg = <0x0923f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irqmux";
ranges = <0 0x09230000 0x3000>;