[PATCH v2] timers: Clear must_forward_clk inside base lock

[Gaurav Kohli]

Timer wheel base->must_forward_clock is indicating that
the base clock might be stale due to a long idle sleep.
The forwarding of base clock takes place in softirq of timer
or when a timer is enqueued to base which is idle. While migrate
timer from remote CPU to the new base which is idle, then
following race can happen:

  CPU0                                  CPU1
  run_timer_softirq                     timers_dead_cpu

					base = lock_timer_base(timer);
  base->must_forward_clk = false
					if (base->must_forward_clk)
				         forward(base); >>skip

					migrate_timer_list
					enqueue_timer(base, timer, idx);
					>> idx is calculated high due to
					>> stale base
					unlock_timer_base(timer);
  base = lock_timer_base(timer);
  forward(base);

The root cause is that base->must_forward_clk is cleared outside the
base->lock held region, so the remote queuing CPU observes it as
cleared, but the base clock is still stale. This can cause large
granularity values for timers, i.e. the accuracy of the expiry time
suffers.

Prevent this by clearing the flag with base->lock held, so that the
forwarding takes place before the cleared flag is observable by a remote
CPU.
Signed-off-by: Gaurav Kohli <gkohli@xxxxxxxxxxxxxx>
---
Changes since v1:
 - Updated comment suggested by Thomas.
diff --git a/kernel/time/timer.c b/kernel/time/timer.c
index cc2d23e..8f61d45 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -1657,6 +1657,22 @@ static inline void __run_timers(struct timer_base *base)
 
 	raw_spin_lock_irq(&base->lock);
 
+	/*
+	 * Timer wheel base must_forward_clk must be cleared before running
+	 * timers so that any timer functions that call mod_timer will not
+	 * try to forward the base. idle tracking / clock forwarding logic
+	 * is only used with BASE_STD timers.
+	 *
+	 * The must_forward_clk flag is cleared unconditionally also for
+	 * the deferrable base. The deferrable base is not affected by idle
+	 * tracking and never forwarded, so clearing the flag is a NOOP.
+	 *
+	 * The fact that the deferrable base is never forwarded can cause
+	 * large variations in granularity for deferrable timers, but they
+	 * can be deferred for long periods due to idle anyway.
+	 */
+	base->must_forward_clk = false;
+
 	while (time_after_eq(jiffies, base->clk)) {
 
 		levels = collect_expired_timers(base, heads);
@@ -1676,19 +1692,6 @@ static __latent_entropy void run_timer_softirq(struct softirq_action *h)
 {
 	struct timer_base *base = this_cpu_ptr(&timer_bases[BASE_STD]);
 
-	/*
-	 * must_forward_clk must be cleared before running timers so that any
-	 * timer functions that call mod_timer will not try to forward the
-	 * base. idle trcking / clock forwarding logic is only used with
-	 * BASE_STD timers.
-	 *
-	 * The deferrable base does not do idle tracking at all, so we do
-	 * not forward it. This can result in very large variations in
-	 * granularity for deferrable timers, but they can be deferred for
-	 * long periods due to idle.
-	 */
-	base->must_forward_clk = false;
-
 	__run_timers(base);
 	if (IS_ENABLED(CONFIG_NO_HZ_COMMON))
 		__run_timers(this_cpu_ptr(&timer_bases[BASE_DEF]));
-- 
1.9.1