Re: [PATCH v3 3/3] mtd: m25p80: Call spi_mem_get_name() to let controller set a custom name

[Boris Brezillon]

On Thu,  2 Aug 2018 14:53:54 +0200
Frieder Schrempf <frieder.schrempf@xxxxxxxxx> wrote:

> By calling spi_mem_get_name(), the driver of the (Q)SPI controller can
> set a custom name for the memory device if necessary.
> This is useful to keep mtdparts compatible when controller drivers are
> ported from the MTD to the SPI layer.
> 
> Suggested-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
> Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxx>

Acked-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>

> ---
>  drivers/mtd/devices/m25p80.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index e84563d..aac48800 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -202,6 +202,9 @@ static int m25p_probe(struct spi_mem *spimem)
>  	if (data && data->name)
>  		nor->mtd.name = data->name;
>  
> +	if (!nor->mtd.name)
> +		nor->mtd.name = spi_mem_get_name(spimem);
> +
>  	/* For some (historical?) reason many platforms provide two different
>  	 * names in flash_platform_data: "name" and "type". Quite often name is
>  	 * set to "m25p80" and then "type" provides a real chip name.