Re: framebuffer corruption due to overlapping stp instructions on arm64

[Mikulas Patocka]

On Thu, 2 Aug 2018, Matt Sealey wrote:

> The easiest explanation for this would be that the memory isn?t mapped 
> correctly. You can?t use PCIe memory spaces with anything other than 
> Device-nGnRE or stricter mappings. That?s just differences between the 
> AMBA and PCIe (posted/unposted) memory models.

I've tried to use Device-nGnRE mapping and I've got unaligned access 
traps. Gcc have store-merging pass so that it generates unaligned accesses 
even in code that has none explicit unaligned accesses. Perhaps it would 
be possible to recompile the kernel without the store-merging pass, but 
recompiling all the userspace code is impossible.

Should we catch the unaligned access traps in the kernel and emulate them? 
There are a lot of instructions that access memory in the ARMv8 ISA, so 
the emulator would be quite complicated.

> Normal memory (cacheable or uncacheable, which Linux tends to call 
> ?memory? and ?writecombine? respectively) is not a good idea.
> 
> There are two options; make sure Links maps it?s framebuffer as Device 
> memory, or the driver, or both - and make sure that only aligned 
> accesses happen (otherwise you?ll just get a synchronous exception) and 
> there isn?t a Normal memory alias.
> 
> Alternatively, tell the PCIe driver that the framebuffer is in system 
> memory

But how would the graphics card display from it? You'd have to 
periodically copy the framebuffer from the system memory to the real 
videoram. I'm not an expert in graphics drivers, I don't know if the 
graphics drivers have this possibility.

> - you can map it however you like but there?ll be a performance 
> hit if you start to use GPU acceleration, but a significant performance 
> boost from the PoV of the CPU. Only memory accessed from the PCIe master 
> interface (i.e. reads and writes generated by the card itself - telling 
> the GPU to pull from system memory or other DMA) can be in Normal memory 
> and this allows PCIe to be cache coherent with the right interconnect. 
> The slave port on a PCIe root complex (i.e. CPU writes) can?t be used 
> with Normal, or reorderable, and therefore your 2GB of graphics memory 
> is going to be slow from the point of view of the CPU.
> 
> To find the correct mapping you?ll need to know just how cache coherent 
> the PCIe RC is...
> 
> Ta,
> Matt

Mikulas