[PATCH v3 2/4] drm/mxsfb: Add pm_runtime calls to pipe_enable/disable

[Leonard Crestez]

Adding lcdif nodes to a power domain currently results in
black/corrupted screens or hangs because power is not correctly enabled
when required.

Ensure power is on when display is active by adding
pm_runtime_get/put_sync to mxsfb_pipe_enable/disable.

Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx>
---
 drivers/gpu/drm/mxsfb/mxsfb_drv.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
index ffe5137ccaf8..68d79f5dc0d3 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
@@ -101,23 +101,27 @@ static const struct drm_mode_config_funcs mxsfb_mode_config_funcs = {
 static void mxsfb_pipe_enable(struct drm_simple_display_pipe *pipe,
 			      struct drm_crtc_state *crtc_state,
 			      struct drm_plane_state *plane_state)
 {
 	struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
+	struct drm_device *drm = pipe->plane.dev;
 
+	pm_runtime_get_sync(drm->dev);
 	drm_panel_prepare(mxsfb->panel);
 	mxsfb_crtc_enable(mxsfb);
 	drm_panel_enable(mxsfb->panel);
 }
 
 static void mxsfb_pipe_disable(struct drm_simple_display_pipe *pipe)
 {
 	struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
+	struct drm_device *drm = pipe->plane.dev;
 
 	drm_panel_disable(mxsfb->panel);
 	mxsfb_crtc_disable(mxsfb);
 	drm_panel_unprepare(mxsfb->panel);
+	pm_runtime_put_sync(drm->dev);
 }
 
 static void mxsfb_pipe_update(struct drm_simple_display_pipe *pipe,
 			      struct drm_plane_state *plane_state)
 {
-- 
2.17.1