[PATCH v2 1/2] dt: bindings: lm3697: Add bindings for lm3697 driver

[Dan Murphy]

Add the device tree bindings for the lm3697
led driver for backlighting and display.

Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---

v2 - Fixed subject and patch commit message - https://lore.kernel.org/patchwork/patch/971326/

 .../devicetree/bindings/leds/leds-lm3697.txt  | 64 +++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3697.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-lm3697.txt b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
new file mode 100644
index 000000000000..7b8e490f1ea1
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
@@ -0,0 +1,64 @@
+* Texas Instruments - LM3697 Highly Efficient White LED Driver
+
+The LM3697 11-bit LED driver provides high-
+performance backlight dimming for 1, 2, or 3 series
+LED strings while delivering up to 90% efficiency.
+
+This device is suitable for Display and Keypad Lighting
+
+Required properties:
+	- compatible:
+		"ti,lm3967"
+	- reg :  I2C slave address
+	- #address-cells : 1
+	- #size-cells : 0
+	- control-bank-cfg - : Indicates which sink is connected to which control bank
+		0 - All HVLED outputs are controlled by bank A
+		1 - HVLED1 is controlled bank B, HVLED2/3 are controlled by bank A
+		2 - HVLED2 is controlled bank B, HVLED1/3 are controlled by bank A
+		3 - HVLED1/2 are controlled by bank B, HVLED3 is controlled by bank A
+		4 - HVLED3 is controlled by bank B, HVLED1/2 are controlled by bank A
+		5 - HVLED1/3 is controlled by bank B, HVLED2 is controlled by bank A
+		6 - (default) HVLED1 is controlled by bank A, HVLED2/3 are controlled by bank B
+		7 - All HVLED outputs are controlled by bank B
+
+Optional properties:
+	- enable-gpios : gpio pin to enable/disable the device.
+	- vled-supply : LED supply
+
+Required child properties:
+	- reg : 0 - LED is Controlled by bank A
+		1 - LED is Controlled by bank B
+
+Optional child properties:
+	- label : see Documentation/devicetree/bindings/leds/common.txt
+	- linux,default-trigger :
+	   see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+led-controller@36 {
+	compatible = "ti,lm3967";
+	reg = <0x36>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	vled-supply = <&vbatt>;
+	control-bank-cfg = <0>;
+
+	led@0 {
+		reg = <0>;
+		label = "white:first_backlight_cluster";
+		linux,default-trigger = "backlight";
+	};
+
+	led@1 {
+		reg = <1>;
+		label = "white:second_backlight_cluster";
+		linux,default-trigger = "frontlight";
+	};
+}
+
+For more product information please see the link below:
+http://www.ti.com/lit/ds/symlink/lm3697.pdf
-- 
2.17.0.582.gccdcbd54c