Re: [PATCH] memcg, oom: be careful about races when warning about no reclaimable task
From: Michal Hocko
Date: Wed Aug 08 2018 - 02:44:20 EST
On Tue 07-08-18 16:54:25, Johannes Weiner wrote:
> On Tue, Aug 07, 2018 at 10:23:32PM +0200, Michal Hocko wrote:
> > On Tue 07-08-18 16:02:47, Johannes Weiner wrote:
> > > On Tue, Aug 07, 2018 at 09:25:53AM +0200, Michal Hocko wrote:
> > > > From: Michal Hocko <mhocko@xxxxxxxx>
> > > >
> > > > "memcg, oom: move out_of_memory back to the charge path" has added a
> > > > warning triggered when the oom killer cannot find any eligible task
> > > > and so there is no way to reclaim the oom memcg under its hard limit.
> > > > Further charges for such a memcg are forced and therefore the hard limit
> > > > isolation is weakened.
> > > >
> > > > The current warning is however too eager to trigger even when we are not
> > > > really hitting the above condition. Syzbot[1] and Greg Thelen have noticed
> > > > that we can hit this condition even when there is still oom victim
> > > > pending. E.g. the following race is possible:
> > > >
> > > > memcg has two tasks taskA, taskB.
> > > >
> > > > CPU1 (taskA) CPU2 CPU3 (taskB)
> > > > try_charge
> > > > mem_cgroup_out_of_memory try_charge
> > > > select_bad_process(taskB)
> > > > oom_kill_process oom_reap_task
> > > > # No real memory reaped
> > > > mem_cgroup_out_of_memory
> > > > # set taskB -> MMF_OOM_SKIP
> > > > # retry charge
> > > > mem_cgroup_out_of_memory
> > > > oom_lock oom_lock
> > > > select_bad_process(self)
> > > > oom_kill_process(self)
> > > > oom_unlock
> > > > # no eligible task
> > > >
> > > > In fact syzbot test triggered this situation by placing multiple tasks
> > > > into a memcg with hard limit set to 0. So no task really had any memory
> > > > charged to the memcg
> > > >
> > > > : Memory cgroup stats for /ile0: cache:0KB rss:0KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB swap:0KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
> > > > : Tasks state (memory values in pages):
> > > > : [ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name
> > > > : [ 6569] 0 6562 9427 1 53248 0 0 syz-executor0
> > > > : [ 6576] 0 6576 9426 0 61440 0 0 syz-executor6
> > > > : [ 6578] 0 6578 9426 534 61440 0 0 syz-executor4
> > > > : [ 6579] 0 6579 9426 0 57344 0 0 syz-executor5
> > > > : [ 6582] 0 6582 9426 0 61440 0 0 syz-executor7
> > > > : [ 6584] 0 6584 9426 0 57344 0 0 syz-executor1
> > > >
> > > > so in principle there is indeed nothing reclaimable in this memcg and
> > > > this looks like a misconfiguration. On the other hand we can clearly
> > > > kill all those tasks so it is a bit early to warn and scare users. Do
> > > > that by checking that the current is the oom victim and bypass the
> > > > warning then. The victim is allowed to force charge and terminate to
> > > > release its temporal charge along the way.
> > > >
> > > > [1] http://lkml.kernel.org/r/0000000000005e979605729c1564@xxxxxxxxxx
> > > > Fixes: "memcg, oom: move out_of_memory back to the charge path"
> > > > Noticed-by: Greg Thelen <gthelen@xxxxxxxxxx>
> > > > Reported-and-tested-by: syzbot+bab151e82a4e973fa325@xxxxxxxxxxxxxxxxxxxxxxxxx
> > > > Signed-off-by: Michal Hocko <mhocko@xxxxxxxx>
> > > > ---
> > > > mm/memcontrol.c | 3 ++-
> > > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> > > > index 4603ad75c9a9..1b6eed1bc404 100644
> > > > --- a/mm/memcontrol.c
> > > > +++ b/mm/memcontrol.c
> > > > @@ -1703,7 +1703,8 @@ static enum oom_status mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int
> > > > return OOM_ASYNC;
> > > > }
> > > >
> > > > - if (mem_cgroup_out_of_memory(memcg, mask, order))
> > > > + if (mem_cgroup_out_of_memory(memcg, mask, order) ||
> > > > + tsk_is_oom_victim(current))
> > > > return OOM_SUCCESS;
> > > >
> > > > WARN(1,"Memory cgroup charge failed because of no reclaimable memory! "
> > >
> > > This is really ugly. :(
> > >
> > > If that check is only there to suppress the warning when the limit is
> > > 0, this should really be a separate branch around the warning, with a
> > > fat comment that this is a ridiculous cornercase, and not look like it
> > > is an essential part of the memcg reclaim/oom process.
> >
> > I do not mind having it in a separate branch. Btw. this is not just about
> > hard limit set to 0. Similar can happen anytime we are getting out of
> > oom victims. The likelihood goes up with the remote memcg charging
> > merged recently.
>
> What the global OOM killer does in that situation is dump the header
> anyway:
>
> /* Found nothing?!?! Either we hang forever, or we panic. */
> if (!oc->chosen && !is_sysrq_oom(oc) && !is_memcg_oom(oc)) {
> dump_header(oc, NULL);
> panic("Out of memory and no killable processes...\n");
> }
>
> I think that would make sense here as well - without the panic,
> obviously, but we can add our own pr_err() line following the header.
>
> That gives us the exact memory situation of the cgroup and who is
> trying to allocate and from what context, but in a format that is
> known to users without claiming right away that it's a kernel issue.
I was considering doing that initially but then decided that warning is
less noisy and still a good "let us know" trigger. It doesn't give us
the whole picture which is obviously a downside but we would at least
know that something is going south one have the trace to who that might
be should this be a bug rather than a misconfiguration.
But I do not mind doing dump_header as well. Care to send a patch?
--
Michal Hocko
SUSE Labs