Re: [PATCH v8] irqchip: Add driver for Cirrus Logic Madera codecs
From: Marc Zyngier
Date: Wed Aug 08 2018 - 06:27:56 EST
On 06/08/18 17:04, Richard Fitzgerald wrote:
> The Cirrus Logic Madera codecs (Cirrus Logic CS47L35/85/90/91 and WM1840)
> are highly complex devices containing up to 7 programmable DSPs and many
> other internal sources of interrupts plus a number of GPIOs that can be
> used as interrupt inputs. The large number (>150) of internal interrupt
> sources are managed by an on-board interrupt controller.
>
> This driver provides the handling for the interrupt controller. As the
> codec is accessed via regmap, we can make use of the generic IRQ
> functionality from regmap to do most of the work. Only around half of
> the possible interrupt source are currently of interest from the driver
> so only this subset is defined. Others can be added in future if needed.
>
> The KConfig options are not user-configurable because this driver is
> mandatory so is automatically included when the parent MFD driver is
> selected.
>
> Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
> ---
> IMPORTANT:
> This patch has a build dependency on patches from the mfd for-next tree:
>
> 16b27467f46c mfd: madera: Add common support for Cirrus Logic Madera codecs
> 97c2b5cba204 mfd: madera: Add register definitions for Cirrus Logic Madera codecs
> ---
> MAINTAINERS | 2 +
> drivers/irqchip/Kconfig | 3 +
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-madera.c | 257 +++++++++++++++++++++++++++++++
> include/linux/irqchip/irq-madera-pdata.h | 24 +++
> include/linux/irqchip/irq-madera.h | 144 +++++++++++++++++
> 6 files changed, 431 insertions(+)
> create mode 100644 drivers/irqchip/irq-madera.c
> create mode 100644 include/linux/irqchip/irq-madera-pdata.h
> create mode 100644 include/linux/irqchip/irq-madera.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b52bb772b57e..5712fa1f2b78 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3524,8 +3524,10 @@ W: https://github.com/CirrusLogic/linux-drivers/wiki
> S: Supported
> F: Documentation/devicetree/bindings/mfd/madera.txt
> F: Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
> +F: include/linux/irqchip/irq-madera*
> F: include/linux/mfd/madera/*
> F: drivers/gpio/gpio-madera*
> +F: drivers/irqchip/irq-madera*
> F: drivers/mfd/madera*
> F: drivers/mfd/cs47l*
> F: drivers/pinctrl/cirrus/*
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index d564d21245c5..45e171c623b3 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -150,6 +150,9 @@ config IMGPDC_IRQ
> select GENERIC_IRQ_CHIP
> select IRQ_DOMAIN
>
> +config MADERA_IRQ
> + tristate
> +
> config IRQ_MIPS_CPU
> bool
> select GENERIC_IRQ_CHIP
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 15f268f646bf..608a136c6af3 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -87,3 +87,4 @@ obj-$(CONFIG_MESON_IRQ_GPIO) += irq-meson-gpio.o
> obj-$(CONFIG_GOLDFISH_PIC) += irq-goldfish-pic.o
> obj-$(CONFIG_NDS32) += irq-ativic32.o
> obj-$(CONFIG_QCOM_PDC) += qcom-pdc.o
> +obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
> diff --git a/drivers/irqchip/irq-madera.c b/drivers/irqchip/irq-madera.c
> new file mode 100644
> index 000000000000..4104056fd38a
> --- /dev/null
> +++ b/drivers/irqchip/irq-madera.c
> @@ -0,0 +1,257 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Interrupt support for Cirrus Logic Madera codecs
> + *
> + * Copyright (C) 2015-2018 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; version 2.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/gpio.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of_irq.h>
> +#include <linux/irqchip/irq-madera.h>
> +#include <linux/irqchip/irq-madera-pdata.h>
> +#include <linux/mfd/madera/core.h>
> +#include <linux/mfd/madera/pdata.h>
> +#include <linux/mfd/madera/registers.h>
> +
> +#define MADERA_IRQ(_irq, _reg) \
> + [MADERA_IRQ_ ## _irq] = { \
> + .reg_offset = (_reg) - MADERA_IRQ1_STATUS_2, \
> + .mask = MADERA_ ## _irq ## _EINT1 \
> + }
> +
> +static const struct regmap_irq madera_irqs[MADERA_NUM_IRQ] = {
> + MADERA_IRQ(FLL1_LOCK, MADERA_IRQ1_STATUS_2),
> + MADERA_IRQ(FLL2_LOCK, MADERA_IRQ1_STATUS_2),
> + MADERA_IRQ(FLL3_LOCK, MADERA_IRQ1_STATUS_2),
> + MADERA_IRQ(FLLAO_LOCK, MADERA_IRQ1_STATUS_2),
> +
> + MADERA_IRQ(MICDET1, MADERA_IRQ1_STATUS_6),
> + MADERA_IRQ(MICDET2, MADERA_IRQ1_STATUS_6),
> + MADERA_IRQ(HPDET, MADERA_IRQ1_STATUS_6),
> +
> + MADERA_IRQ(MICD_CLAMP_RISE, MADERA_IRQ1_STATUS_7),
> + MADERA_IRQ(MICD_CLAMP_FALL, MADERA_IRQ1_STATUS_7),
> + MADERA_IRQ(JD1_RISE, MADERA_IRQ1_STATUS_7),
> + MADERA_IRQ(JD1_FALL, MADERA_IRQ1_STATUS_7),
> +
> + MADERA_IRQ(ASRC2_IN1_LOCK, MADERA_IRQ1_STATUS_9),
> + MADERA_IRQ(ASRC2_IN2_LOCK, MADERA_IRQ1_STATUS_9),
> + MADERA_IRQ(ASRC1_IN1_LOCK, MADERA_IRQ1_STATUS_9),
> + MADERA_IRQ(ASRC1_IN2_LOCK, MADERA_IRQ1_STATUS_9),
> + MADERA_IRQ(DRC2_SIG_DET, MADERA_IRQ1_STATUS_9),
> + MADERA_IRQ(DRC1_SIG_DET, MADERA_IRQ1_STATUS_9),
> +
> + MADERA_IRQ(DSP_IRQ1, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ2, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ3, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ4, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ5, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ6, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ7, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ8, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ9, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ10, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ11, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ12, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ13, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ14, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ15, MADERA_IRQ1_STATUS_11),
> + MADERA_IRQ(DSP_IRQ16, MADERA_IRQ1_STATUS_11),
> +
> + MADERA_IRQ(HP3R_SC, MADERA_IRQ1_STATUS_12),
> + MADERA_IRQ(HP3L_SC, MADERA_IRQ1_STATUS_12),
> + MADERA_IRQ(HP2R_SC, MADERA_IRQ1_STATUS_12),
> + MADERA_IRQ(HP2L_SC, MADERA_IRQ1_STATUS_12),
> + MADERA_IRQ(HP1R_SC, MADERA_IRQ1_STATUS_12),
> + MADERA_IRQ(HP1L_SC, MADERA_IRQ1_STATUS_12),
> +
> + MADERA_IRQ(SPK_OVERHEAT_WARN, MADERA_IRQ1_STATUS_15),
> + MADERA_IRQ(SPK_OVERHEAT, MADERA_IRQ1_STATUS_15),
> +
> + MADERA_IRQ(DSP1_BUS_ERR, MADERA_IRQ1_STATUS_33),
> + MADERA_IRQ(DSP2_BUS_ERR, MADERA_IRQ1_STATUS_33),
> + MADERA_IRQ(DSP3_BUS_ERR, MADERA_IRQ1_STATUS_33),
> + MADERA_IRQ(DSP4_BUS_ERR, MADERA_IRQ1_STATUS_33),
> + MADERA_IRQ(DSP5_BUS_ERR, MADERA_IRQ1_STATUS_33),
> + MADERA_IRQ(DSP6_BUS_ERR, MADERA_IRQ1_STATUS_33),
> + MADERA_IRQ(DSP7_BUS_ERR, MADERA_IRQ1_STATUS_33),
> +};
> +
> +static const struct regmap_irq_chip madera_irq = {
> + .name = "madera IRQ",
> + .status_base = MADERA_IRQ1_STATUS_2,
> + .mask_base = MADERA_IRQ1_MASK_2,
> + .ack_base = MADERA_IRQ1_STATUS_2,
> + .runtime_pm = true,
> + .num_regs = 32,
> + .irqs = madera_irqs,
> + .num_irqs = ARRAY_SIZE(madera_irqs),
> +};
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int madera_suspend_noirq(struct device *dev)
> +{
> + struct madera_irq_priv *priv = dev_get_drvdata(dev);
> +
> + dev_dbg(priv->dev, "No IRQ suspend, reenabling IRQ\n");
> +
> + enable_irq(priv->irq);
> +
> + return 0;
> +}
> +
> +static int madera_suspend(struct device *dev)
> +{
> + struct madera_irq_priv *priv = dev_get_drvdata(dev);
> +
> + dev_dbg(priv->dev, "Suspend, disabling IRQ\n");
> +
> + disable_irq(priv->irq);
> +
> + return 0;
> +}
> +
> +static int madera_resume_noirq(struct device *dev)
> +{
> + struct madera_irq_priv *priv = dev_get_drvdata(dev);
> +
> + dev_dbg(priv->dev, "No IRQ resume, disabling IRQ\n");
> +
> + disable_irq(priv->irq);
> +
> + return 0;
> +}
> +
> +static int madera_resume(struct device *dev)
> +{
> + struct madera_irq_priv *priv = dev_get_drvdata(dev);
> +
> + dev_dbg(priv->dev, "Resume, reenabling IRQ\n");
> +
> + enable_irq(priv->irq);
> +
> + return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops madera_irq_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(madera_suspend, madera_resume)
> + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(madera_suspend_noirq,
> + madera_resume_noirq)
> +};
> +
> +static int madera_irq_probe(struct platform_device *pdev)
> +{
> + struct madera *madera = dev_get_drvdata(pdev->dev.parent);
> + struct madera_irq_priv *priv;
I see that this data structure is public (despite the _priv suffix). Why
is that so? It would make a lot more sense to make *really* private, and
move the accessors inside this file (I doubt the inlining is going to
have any visible effect performance wise...).
> + struct irq_data *irq_data;
> + unsigned int irq_flags = 0;
> + int ret;
> +
> + dev_dbg(&pdev->dev, "probe\n");
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = &pdev->dev;
> + priv->madera = madera;
> + priv->irq = madera->irq;
Why do you need to have this field if it is already contained in the
structure you're pointing to?
> +
> +
> + /*
> + * Read the flags from the interrupt controller if not specified
> + * by pdata
> + */
> + irq_flags = madera->pdata.irq_flags;
> + if (!irq_flags) {
> + irq_data = irq_get_irq_data(priv->irq);
> + if (!irq_data) {
> + dev_err(priv->dev, "Invalid IRQ: %d\n", priv->irq);
> + return -EINVAL;
> + }
> +
> + irq_flags = irqd_get_trigger_type(irq_data);
> +
> + /* Codec defaults to trigger low, use this if no flags given */
> + if (irq_flags == IRQ_TYPE_NONE)
> + irq_flags = IRQF_TRIGGER_LOW;
> + }
> +
> + if (irq_flags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
> + dev_err(priv->dev, "Host interrupt not level-triggered\n");
> + return -EINVAL;
> + }
> +
> + if (irq_flags & IRQF_TRIGGER_HIGH) {
> + ret = regmap_update_bits(madera->regmap, MADERA_IRQ1_CTRL,
> + MADERA_IRQ_POL_MASK, 0);
> + if (ret) {
> + dev_err(priv->dev,
> + "Failed to set IRQ polarity: %d\n", ret);
> + return ret;
> + }
> + }
> +
> + /*
> + * NOTE: regmap registers this against the OF node of the parent of
> + * the regmap - that is, against the mfd driver
> + */
> + ret = regmap_add_irq_chip(madera->regmap, priv->irq, IRQF_ONESHOT, 0,
> + &madera_irq, &priv->irq_data);
> + if (ret) {
> + dev_err(priv->dev, "add_irq_chip failed: %d\n", ret);
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, priv);
> + madera->irq_dev = priv->dev;
Again: why do you duplicate this information? priv has the device,
madera has it too, and priv point to madera...
At the end of the day, it looks like all you need in the priv structure
is a pointer to the struct regmap_irq_chip_data, and a pointer to the
struct madera. At which point you should ask yourself why the
regmap_irq_chip_data field is not part of struct madera, and why you
have a priv structure at all...
> +
> + return 0;
> +}
> +
> +static int madera_irq_remove(struct platform_device *pdev)
> +{
> + struct madera_irq_priv *priv = platform_get_drvdata(pdev);
> +
> + /*
> + * The IRQ is disabled by the parent MFD driver before
> + * it starts cleaning up all child drivers
> + */
> +
> + priv->madera->irq_dev = NULL;
> +
> + regmap_del_irq_chip(priv->irq, priv->irq_data);
> + free_irq(priv->irq, priv);
> +
> + return 0;
> +}
> +
> +static struct platform_driver madera_irq_driver = {
> + .probe = &madera_irq_probe,
> + .remove = &madera_irq_remove,
> + .driver = {
> + .name = "madera-irq",
> + .pm = &madera_irq_pm_ops,
> + }
> +};
> +module_platform_driver(madera_irq_driver);
> +
> +MODULE_SOFTDEP("pre: mfd-madera");
> +MODULE_DESCRIPTION("Madera IRQ driver");
> +MODULE_AUTHOR("Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/irqchip/irq-madera-pdata.h b/include/linux/irqchip/irq-madera-pdata.h
> new file mode 100644
> index 000000000000..735fe3a97d2c
> --- /dev/null
> +++ b/include/linux/irqchip/irq-madera-pdata.h
> @@ -0,0 +1,24 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Platform data for Cirrus Logic Madera codecs irqchip driver
> + *
> + * Copyright 2016-2017 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; version 2.
> + */
> +
> +#ifndef IRQCHIP_MADERA_PDATA_H
> +#define IRQCHIP_MADERA_PDATA_H
> +
> +/**
> + * struct madera_irqchip_pdata - Configuration for Madera devices IRQ driver
> + *
> + * @irq_flags: Mode for primary IRQ (defaults to active low)
> + */
> +struct madera_irqchip_pdata {
> + unsigned int irq_flags;
> +};
This looks like some pointless encapsulation.
> +
> +#endif
> diff --git a/include/linux/irqchip/irq-madera.h b/include/linux/irqchip/irq-madera.h
> new file mode 100644
> index 000000000000..a32e98a5a7e3
> --- /dev/null
> +++ b/include/linux/irqchip/irq-madera.h
> @@ -0,0 +1,144 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Interrupt support for Cirrus Logic Madera codecs
> + *
> + * Copyright 2016-2018 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; version 2.
> + */
> +
> +#ifndef IRQCHIP_MADERA_H
> +#define IRQCHIP_MADERA_H
> +
> +#include <linux/interrupt.h>
> +#include <linux/mfd/madera/core.h>
> +
> +#define MADERA_IRQ_FLL1_LOCK 0
> +#define MADERA_IRQ_FLL2_LOCK 1
> +#define MADERA_IRQ_FLL3_LOCK 2
> +#define MADERA_IRQ_FLLAO_LOCK 3
> +#define MADERA_IRQ_CLK_SYS_ERR 4
> +#define MADERA_IRQ_CLK_ASYNC_ERR 5
> +#define MADERA_IRQ_CLK_DSP_ERR 6
> +#define MADERA_IRQ_HPDET 7
> +#define MADERA_IRQ_MICDET1 8
> +#define MADERA_IRQ_MICDET2 9
> +#define MADERA_IRQ_JD1_RISE 10
> +#define MADERA_IRQ_JD1_FALL 11
> +#define MADERA_IRQ_JD2_RISE 12
> +#define MADERA_IRQ_JD2_FALL 13
> +#define MADERA_IRQ_MICD_CLAMP_RISE 14
> +#define MADERA_IRQ_MICD_CLAMP_FALL 15
> +#define MADERA_IRQ_DRC2_SIG_DET 16
> +#define MADERA_IRQ_DRC1_SIG_DET 17
> +#define MADERA_IRQ_ASRC1_IN1_LOCK 18
> +#define MADERA_IRQ_ASRC1_IN2_LOCK 19
> +#define MADERA_IRQ_ASRC2_IN1_LOCK 20
> +#define MADERA_IRQ_ASRC2_IN2_LOCK 21
> +#define MADERA_IRQ_DSP_IRQ1 22
> +#define MADERA_IRQ_DSP_IRQ2 23
> +#define MADERA_IRQ_DSP_IRQ3 24
> +#define MADERA_IRQ_DSP_IRQ4 25
> +#define MADERA_IRQ_DSP_IRQ5 26
> +#define MADERA_IRQ_DSP_IRQ6 27
> +#define MADERA_IRQ_DSP_IRQ7 28
> +#define MADERA_IRQ_DSP_IRQ8 29
> +#define MADERA_IRQ_DSP_IRQ9 30
> +#define MADERA_IRQ_DSP_IRQ10 31
> +#define MADERA_IRQ_DSP_IRQ11 32
> +#define MADERA_IRQ_DSP_IRQ12 33
> +#define MADERA_IRQ_DSP_IRQ13 34
> +#define MADERA_IRQ_DSP_IRQ14 35
> +#define MADERA_IRQ_DSP_IRQ15 36
> +#define MADERA_IRQ_DSP_IRQ16 37
> +#define MADERA_IRQ_HP1L_SC 38
> +#define MADERA_IRQ_HP1R_SC 39
> +#define MADERA_IRQ_HP2L_SC 40
> +#define MADERA_IRQ_HP2R_SC 41
> +#define MADERA_IRQ_HP3L_SC 42
> +#define MADERA_IRQ_HP3R_SC 43
> +#define MADERA_IRQ_SPKOUTL_SC 44
> +#define MADERA_IRQ_SPKOUTR_SC 45
> +#define MADERA_IRQ_HP1L_ENABLE_DONE 46
> +#define MADERA_IRQ_HP1R_ENABLE_DONE 47
> +#define MADERA_IRQ_HP2L_ENABLE_DONE 48
> +#define MADERA_IRQ_HP2R_ENABLE_DONE 49
> +#define MADERA_IRQ_HP3L_ENABLE_DONE 50
> +#define MADERA_IRQ_HP3R_ENABLE_DONE 51
> +#define MADERA_IRQ_SPKOUTL_ENABLE_DONE 52
> +#define MADERA_IRQ_SPKOUTR_ENABLE_DONE 53
> +#define MADERA_IRQ_SPK_SHUTDOWN 54
> +#define MADERA_IRQ_SPK_OVERHEAT 55
> +#define MADERA_IRQ_SPK_OVERHEAT_WARN 56
> +#define MADERA_IRQ_GPIO1 57
> +#define MADERA_IRQ_GPIO2 58
> +#define MADERA_IRQ_GPIO3 59
> +#define MADERA_IRQ_GPIO4 60
> +#define MADERA_IRQ_GPIO5 61
> +#define MADERA_IRQ_GPIO6 62
> +#define MADERA_IRQ_GPIO7 63
> +#define MADERA_IRQ_GPIO8 64
> +#define MADERA_IRQ_DSP1_BUS_ERR 65
> +#define MADERA_IRQ_DSP2_BUS_ERR 66
> +#define MADERA_IRQ_DSP3_BUS_ERR 67
> +#define MADERA_IRQ_DSP4_BUS_ERR 68
> +#define MADERA_IRQ_DSP5_BUS_ERR 69
> +#define MADERA_IRQ_DSP6_BUS_ERR 70
> +#define MADERA_IRQ_DSP7_BUS_ERR 71
> +
> +#define MADERA_NUM_IRQ 72
I expect that all future revision of similar codecs will have the exact
same interrupt mapping, and that we won't have to duplicate this table
in the future, right?
Otherwise, should we consider placing the mapping in DT, or something
like that?
> +
> +struct madera_irq_priv {
> + struct device *dev;
> + int irq;
> + struct regmap_irq_chip_data *irq_data;
> + struct madera *madera;
> +};
As I said above, I think this whole structure can go.
> +
> +/*
> + * These wrapper functions are for use by other child drivers of the
> + * parent MFD.
> + */
> +static inline int madera_map_irq(struct madera *madera, int irq)
This doesn't perform any mapping, right? It only returns an existing
mapping. So something like madera_get_irq_mapping() would be more
appropriate.
> +{
> + struct madera_irq_priv *priv = dev_get_drvdata(madera->irq_dev);
> +
> + if (!madera->irq_dev)
> + return -ENOENT;
> +
> + return regmap_irq_get_virq(priv->irq_data, irq);
> +}
> +
> +static inline int madera_request_irq(struct madera *madera, int irq,
> + const char *name,
> + irq_handler_t handler, void *data)
> +{
> + irq = madera_map_irq(madera, irq);
> + if (irq < 0)
> + return irq;
> +
> + return request_threaded_irq(irq, NULL, handler, IRQF_ONESHOT, name,
> + data);
> +}
> +
> +static inline void madera_free_irq(struct madera *madera, int irq, void *data)
> +{
> + irq = madera_map_irq(madera, irq);
> + if (irq < 0)
> + return;
> +
> + free_irq(irq, data);
> +}
> +
> +static inline int madera_set_irq_wake(struct madera *madera, int irq, int on)
> +{
> + irq = madera_map_irq(madera, irq);
> + if (irq < 0)
> + return irq;
> +
> + return irq_set_irq_wake(irq, on);
> +}
> +
> +#endif
>
Thanks,
M.
--
Jazz is not dead. It just smells funny...