Re: [PATCH v8 1/2] i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller

[Evan Green]

On Tue, Jul 31, 2018 at 12:20 PM Wolfram Sang <wsa@xxxxxxxxxxxxx> wrote:
>
> On Mon, Jul 30, 2018 at 11:23:51AM -0600, Karthikeyan Ramasubramanian wrote:
> > This bus driver supports the GENI based i2c hardware controller in the
> > Qualcomm SOCs. The Qualcomm Generic Interface (GENI) is a programmable
> > module supporting a wide range of serial interfaces including I2C. The
> > driver supports FIFO mode and DMA mode of transfer and switches modes
> > dynamically depending on the size of the transfer.
> >
> > Signed-off-by: Karthikeyan Ramasubramanian <kramasub@xxxxxxxxxxxxxx>
> > Signed-off-by: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>
> > Signed-off-by: Girish Mahadevan <girishm@xxxxxxxxxxxxxx>
> > Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> > Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> > Tested-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
>
> Applied to for-next, thanks!
>
> As discussed, I squashed the MAINTAINER addition and the RPM fix by Evan
> into this commit. Please check later that I resolved the conflict
> correctly (once I pushed out).

The squashing in of my patch looks good!