Re: [PATCH v2] dt-bindings: media: adv748x: Document re-mappable addresses

[Laurent Pinchart]

Hi Kieran,

Thank you for the patch.

On Thursday, 9 August 2018 02:29:41 EEST Kieran Bingham wrote:
> The ADV748x supports configurable slave addresses for its I2C pages.
> Document the page names, and provide an example for setting each of the
> pages explicitly.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
> ---
> v2:
>  - Fix commit message
>  - Extend documentation for the "required property" reg:
> 
> 
>  .../devicetree/bindings/media/i2c/adv748x.txt    | 16 ++++++++++++++--
>  1 file changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> b/Documentation/devicetree/bindings/media/i2c/adv748x.txt index
> 21ffb5ed8183..f7fbe221c15e 100644
> --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> @@ -10,7 +10,11 @@ Required Properties:
>      - "adi,adv7481" for the ADV7481
>      - "adi,adv7482" for the ADV7482
> 
> -  - reg: I2C slave address
> +  - reg: I2C slave addresses
> +    The ADV748x has up to twelve 256-byte maps that can be accessed via the
> +    main I2C ports. Each map has it own I2C address and acts as a standard
> +    slave device on the I2C bus. The main address is mandatory, others are
> +    optional and revert to defaults if not specified.

Maybe "revert" has a meaning I'm not aware of, but don't you mean "default" 
instead ? "default to defaults" probably needs to be rephrased though.

>  Optional Properties:
> 
> @@ -18,6 +22,11 @@ Optional Properties:
>  		     "intrq3". All interrupts are optional. The "intrq3" interrupt
>  		     is only available on the adv7481
>    - interrupts: Specify the interrupt lines for the ADV748x
> +  - reg-names : Names of maps with programmable addresses.
> +		It can contain any map needed a non-default address.

I think you missed my comment to v1:

s/can contain any map needed/shall contain all maps needing/

> +		Possible map names are:
> +		  "main", "dpll", "cp", "hdmi", "edid", "repeater",
> +		  "infoframe", "cbus", "cec", "sdp", "txa", "txb"
> 
>  The device node must contain one 'port' child node per device input and
> output port, in accordance with the video interface bindings defined in
> @@ -47,7 +56,10 @@ Example:
> 
>  	video-receiver@70 {
>  		compatible = "adi,adv7482";
> -		reg = <0x70>;
> +		reg = <0x70 0x71 0x72 0x73 0x74 0x75
> +		       0x60 0x61 0x62 0x63 0x64 0x65>;
> +		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
> +			    "infoframe", "cbus", "cec", "sdp", "txa", "txb";
> 
>  		#address-cells = <1>;
>  		#size-cells = <0>;

-- 
Regards,

Laurent Pinchart