Re: [PATCH] PCI/AER: Do not clear AER bits if we don't own AER

[Alex_Gagniuc]

On 08/09/2018 09:16 AM, Bjorn Helgaas wrote:
> On Tue, Jul 17, 2018 at 10:31:23AM -0500, Alexandru Gagniuc wrote:
>> When we don't own AER, we shouldn't touch the AER error bits. This
>> happens unconditionally on device probe(). Clearing AER bits
>> willy-nilly might cause firmware to miss errors. Instead
>> these bits should get cleared by FFS, or via ACPI _HPX method.
>>
>> This race is mostly of theoretical significance, as it is not easy to
>> reasonably demonstrate it in testing.
>>
>> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
>> ---
>>   drivers/pci/pcie/aer.c | 3 +++
>>   1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
>> index a2e88386af28..18037a2a8231 100644
>> --- a/drivers/pci/pcie/aer.c
>> +++ b/drivers/pci/pcie/aer.c
>> @@ -383,6 +383,9 @@ int pci_cleanup_aer_error_status_regs(struct pci_dev *dev)
>>   	if (!pci_is_pcie(dev))
>>   		return -ENODEV;
>>   
>> +	if (pcie_aer_get_firmware_first(dev))
>> +		return -EIO;
> 
> I like this patch.
> 
> Do we need the same thing in the following places that also clear AER
> status bits or write AER control bits?

In theory, every exported function would guard for this. I think the 
idea a long long time ago was that the check happens during 
initialization, and the others are not hit.

>    enable_ecrc_checking()
>    disable_ecrc_checking()

I don't immediately see how this would affect FFS, but the bits are part 
of the AER capability structure. According to the FFS model, those would 
be owned by FW, and we'd have to avoid touching them.

>    pci_cleanup_aer_uncorrect_error_status()

This probably should be guarded. It's only called from a few specific 
drivers, so the impact is not as high as being called from the core.

>    pci_aer_clear_fatal_status()

This is only called when doing fatal_recovery, right?
For practical considerations this is not an issue today. The ACPI error 
handling code currently crashes when it encounters any fatal error, so 
we wouldn't hit this in the FFS case.

If the ACPI code pulls its thinking appendage out of the other end of 
the digestive tract, then we could be hitting this in the future. For 
correctness, guarding makes sense.

The PCIe standards contact I usually talk to about these PCIe subtleties 
is currently on vacation. The number one issue was a FFS corner case 
with OS clearing bits on probe. The other functions you mention are a 
corner case of a corner case. The big fish is 
pci_cleanup_aer_error_status_regs() on probe(), and it would be nice to 
have that resolved.

I'll sync up with Austin when he gets back to see about the other 
functions though I suspect we'll end up fixing them as well.

Alex

>>   	pos = dev->aer_cap;
>>   	if (!pos)
>>   		return -EIO;
>> -- 
>> 2.14.3
>>
>