[PATCH 1/5] clk: sunxi-ng: Add maximum rate constraint to NM PLLs

[Jernej Skrabec]

On some NM PLLs, frequency can be set above PLL working range.

Add a constraint for maximum supported rate. This way, drivers can
specify which is maximum allowed rate for PLL.

Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
---
 drivers/clk/sunxi-ng/ccu_nm.c |  7 +++++++
 drivers/clk/sunxi-ng/ccu_nm.h | 30 ++++++++++++++++++++++++++++++
 2 files changed, 37 insertions(+)

diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
index 4e2073307f34..6fe3c14f7b2d 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.c
+++ b/drivers/clk/sunxi-ng/ccu_nm.c
@@ -124,6 +124,13 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
 		return rate;
 	}
 
+	if (nm->max_rate && rate > nm->max_rate) {
+		rate = nm->max_rate;
+		if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+			rate /= nm->fixed_post_div;
+		return rate;
+	}
+
 	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
 		if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
 			rate /= nm->fixed_post_div;
diff --git a/drivers/clk/sunxi-ng/ccu_nm.h b/drivers/clk/sunxi-ng/ccu_nm.h
index 1d8b459c50b7..de232f2199a6 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.h
+++ b/drivers/clk/sunxi-ng/ccu_nm.h
@@ -38,6 +38,7 @@ struct ccu_nm {
 
 	unsigned int		fixed_post_div;
 	unsigned int		min_rate;
+	unsigned int		max_rate;
 
 	struct ccu_common	common;
 };
@@ -115,6 +116,35 @@ struct ccu_nm {
 		},							\
 	}
 
+#define SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX(_struct, _name,	\
+						 _parent, _reg,		\
+						 _min_rate, _max_rate,	\
+						 _nshift, _nwidth,	\
+						 _mshift, _mwidth,	\
+						 _frac_en, _frac_sel,	\
+						 _frac_rate_0,		\
+						 _frac_rate_1,		\
+						 _gate, _lock, _flags)	\
+	struct ccu_nm _struct = {					\
+		.enable		= _gate,				\
+		.lock		= _lock,				\
+		.n		= _SUNXI_CCU_MULT(_nshift, _nwidth),	\
+		.m		= _SUNXI_CCU_DIV(_mshift, _mwidth),	\
+		.frac		= _SUNXI_CCU_FRAC(_frac_en, _frac_sel,	\
+						  _frac_rate_0,		\
+						  _frac_rate_1),	\
+		.min_rate	= _min_rate,				\
+		.max_rate	= _max_rate,				\
+		.common		= {					\
+			.reg		= _reg,				\
+			.features	= CCU_FEATURE_FRACTIONAL,	\
+			.hw.init	= CLK_HW_INIT(_name,		\
+						      _parent,		\
+						      &ccu_nm_ops,	\
+						      _flags),		\
+		},							\
+	}
+
 #define SUNXI_CCU_NM_WITH_GATE_LOCK(_struct, _name, _parent, _reg,	\
 				    _nshift, _nwidth,			\
 				    _mshift, _mwidth,			\
-- 
2.18.0