RE: [PATCH] net/phy: Micrel KSZ8061 PHY link failure after cable connect

[Onnasch, Alexander (EXT)]

-----Original Message-----
From: David Miller <davem@xxxxxxxxxxxxx> 
Sent: Montag, 30. Juli 2018 18:46
To: Onnasch, Alexander (EXT) <Alexander.Onnasch@xxxxxxxxxxxxx>
Cc: andrew@xxxxxxx; f.fainelli@xxxxxxxxx; netdev@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
Subject: Re: [PATCH] net/phy: Micrel KSZ8061 PHY link failure after cable connect

From: Alexander Onnasch <alexander.onnasch@xxxxxxxxxxxxx>
Date: Mon, 30 Jul 2018 16:01:27 +0200

> With Micrel KSZ8061 PHY, the link may occasionally not come up after 
> Ethernet cable connect. The vendor's (Microchip, former Micrel) errata 
> sheet 80000688A.pdf describes the problem and possible workarounds in 
> detail, see below.
> The patch implements workaround 1, which permanently fixes the issue.
 ...
> Signed-off-by: Alexander Onnasch <alexander.onnasch@xxxxxxxxxxxxx>

This patch does not apply cleanly to any of my neworking trees.


Hello David

thanks a lot for reviewing ! How to proceed now ? If there is action required from my side please tell me.

best regards, 
Alex


Alexander Onnasch |   Landis+Gyr AG   |  Firmware Engineer
Phone: +41 41 935 6357  |   Fax: +41 41 935 6211
Email: alexander.onnasch@xxxxxxxxxxxxx  |   Site: www.landisgyr.com  |   Address: Theilerstr. 1, CH-6301 Zug, Switzerland
manage energy better