Re: [PATCH v2 2/2] arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT support

[Jerome Brunet]

On Mon, 2018-08-13 at 19:48 +0800, Jianxin Pan wrote:
> Try to add basic DT support for the Amlogic's Meson-G12A S905D2 SoC,
> which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
> Timer, UART. It's capable of booting up into the serial console.
> 
> Signed-off-by: Jianxin Pan <jianxin.pan@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile            |   1 +
>  arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts |  22 +++
>  arch/arm64/boot/dts/amlogic/meson-g12a.dtsi     | 172 ++++++++++++++++++++++++
>  3 files changed, 195 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> 
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
> +	};

t* should be after s*

> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;