Re: [PATCH v9 11/22] s390: vfio-ap: sysfs interfaces to configure domains

[Cornelia Huck]

On Mon, 13 Aug 2018 17:48:08 -0400
Tony Krowiak <akrowiak@xxxxxxxxxxxxxxxxxx> wrote:

> From: Tony Krowiak <akrowiak@xxxxxxxxxxxxx>
> 
> Introduces two new sysfs attributes for the VFIO mediated
> matrix device for assigning AP domains to and unassigning
> AP domains from a mediated matrix device. The IDs of the
> AP domains assigned to the mediated matrix device will be
> stored in an AP queue mask (AQM).
> 
> The bits in the AQM, from most significant to least
> significant bit, correspond to AP queue index (APQI) 0 to
> 255 (note that an APQI is synonymous with with a domain ID).
> On some systems, the maximum allowable domain number may be
> less than 255 - depending upon the host's AP configuration -
> and assignment may be rejected if the input domain ID exceeds
> the limit.
> 
> When a domain is assigned, the bit corresponding to the APQI
> will be set in the AQM. Likewise, when a domain is unassigned,
> the bit corresponding to the APQI will be cleared from the AQM.
> 
> In order to successfully assign a domain, the APQNs derived from
> the domain ID being assigned and the adapter numbers of all
> adapters previously assigned:
> 
> 1. Must be bound to the vfio_ap device driver.
> 
> 2. Must not be assigned to any other mediated matrix device.
> 
> If there are no adapters assigned to the mdev, then there must
> be an AP queue bound to the vfio_ap device driver with an
> APQN containing the domain ID (i.e., APQI), otherwise all
> adapters subsequently assigned will fail because there will be no
> AP queues bound with an APQN containing the APQI.
> 
> Assigning or un-assigning an AP domain will also be rejected if
> a guest using the mediated matrix device is running.
> 
> The relevant sysfs structures are:
> 
> /sys/devices/vfio_ap/matrix/
> ...... [mdev_supported_types]
> ......... [vfio_ap-passthrough]
> ............ [devices]
> ...............[$uuid]
> .................. assign_domain
> .................. unassign_domain
> 
> To assign a domain to the $uuid mediated matrix device,
> write the domain's ID to the assign_domain file. To
> unassign a domain, write the domain's ID to the
> unassign_domain file. The ID is specified using
> conventional semantics: If it begins with 0x, the number
> will be parsed as a hexadecimal (case insensitive) number;
> if it begins with 0, it will be parsed as an octal number;
> otherwise, it will be parsed as a decimal number.
> 
> For example, to assign domain 173 (0xad) to the mediated matrix
> device $uuid:
> 
> 	echo 173 > assign_domain
> 
> 	or
> 
> 	echo 0255 > assign_domain
> 
> 	or
> 
> 	echo 0xad > assign_domain
> 
> To unassign domain 173 (0xad):
> 
> 	echo 173 > unassign_domain
> 
> 	or
> 
> 	echo 0255 > unassign_domain
> 
> 	or
> 
> 	echo 0xad > unassign_domain
> 
> Signed-off-by: Tony Krowiak <akrowiak@xxxxxxxxxxxxx>
> Reviewed-by: Halil Pasic <pasic@xxxxxxxxxxxxx>
> Tested-by: Michael Mueller <mimu@xxxxxxxxxxxxx>
> Tested-by: Farhan Ali <alifm@xxxxxxxxxxxxx>
> Tested-by: Pierre Morel <pmorel@xxxxxxxxxxxxx>
> Signed-off-by: Christian Borntraeger <borntraeger@xxxxxxxxxx>
> ---
>  drivers/s390/crypto/vfio_ap_ops.c |   88 ++++++++++++++++++++++++++++++++++++-
>  1 files changed, 87 insertions(+), 1 deletions(-)

Looks sane to me.