Re: [PATCH 2/2] PCI: meson: add the Amlogic Meson PCIe controller driver

[Hanjie Lin]

On 2018/8/14 18:41, Jerome Brunet wrote:
> On Tue, 2018-08-14 at 02:18 -0400, Hanjie Lin wrote:
>> From: Yue Wang <yue.wang@xxxxxxxxxxx>
>>
>> The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare
>> PCI core. This patch adds the driver support for Meson PCIe controller.
>>
>> Signed-off-by: Yue Wang <yue.wang@xxxxxxxxxxx>
>> Signed-off-by: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
>> ---
>>  drivers/pci/controller/dwc/Kconfig     |  12 +
>>  drivers/pci/controller/dwc/Makefile    |   1 +
>>  drivers/pci/controller/dwc/pci-meson.c | 588 +++++++++++++++++++++++++++++++++
>>  3 files changed, 601 insertions(+)
>>  create mode 100644 drivers/pci/controller/dwc/pci-meson.c
>>
>> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
>> index 91b0194..6cb36f6 100644
>> --- a/drivers/pci/controller/dwc/Kconfig
>> +++ b/drivers/pci/controller/dwc/Kconfig
>> @@ -193,4 +193,16 @@ config PCIE_HISI_STB
>>  	help
>>            Say Y here if you want PCIe controller support on HiSilicon STB SoCs
>>  
>> +config PCI_MESON
>> +	bool "MESON PCIe controller"
>> +	depends on PCI
>> +	depends on PCI_MSI_IRQ_DOMAIN
>> +	select PCIEPORTBUS
>> +	select PCIE_DW_HOST
>> +	help
>> +	  Say Y here if you want to enable PCI controller support on Amlogic
>> +	  SoCs. The PCI controller on Amlogic is based on DesignWare hardware
>> +	  and therefore the driver re-uses the DesignWare core functions to
>> +	  implement the driver.
>> +
>>  endmenu
>> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
>> index 5d2ce72..cf676bd 100644
>> --- a/drivers/pci/controller/dwc/Makefile
>> +++ b/drivers/pci/controller/dwc/Makefile
>> @@ -14,6 +14,7 @@ obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
>>  obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
>>  obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
>>  obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
>> +obj-$(CONFIG_PCI_MESON) += pci-meson.o
>>  
>>  # The following drivers are for devices that use the generic ACPI
>>  # pci_root.c driver but don't support standard ECAM config access.
>> diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
>> new file mode 100644
>> index 0000000..1e96e45
>> --- /dev/null
>> +++ b/drivers/pci/controller/dwc/pci-meson.c
>> @@ -0,0 +1,588 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * PCIe host controller driver for Amlogic MESON SoCs
>> + *
>> + * Copyright (c) 2018 Amlogic, inc.
>> + * Author: Yue Wang <yue.wang@xxxxxxxxxxx>
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_gpio.h>
>> +#include <linux/pci.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/resource.h>
>> +#include <linux/types.h>
>> +
>> +#include "pcie-designware.h"
>> +
>> +#define to_meson_pcie(x) dev_get_drvdata((x)->dev)
>> +
>> +/* External local bus interface registers */
>> +#define PLR_OFFSET			0x700
>> +#define PCIE_PORT_LINK_CTRL_OFF		(PLR_OFFSET + 0x10)
>> +#define FAST_LINK_MODE			BIT(7)
>> +#define LINK_CAPABLE_MASK		GENMASK(21, 16)
>> +#define LINK_CAPABLE_X1			BIT(16)
>> +
>> +#define PCIE_GEN2_CTRL_OFF		(PLR_OFFSET + 0x10c)
>> +#define NUM_OF_LANES_MASK		GENMASK(12, 8)
>> +#define NUM_OF_LANES_X1			BIT(8)
>> +#define DIRECT_SPEED_CHANGE		BIT(17)
>> +
>> +#define TYPE1_HDR_OFFSET		0x0
>> +#define PCIE_STATUS_COMMAND		(TYPE1_HDR_OFFSET + 0x04)
>> +#define PCI_IO_EN			BIT(0)
>> +#define PCI_MEM_SPACE_EN		BIT(1)
>> +#define PCI_BUS_MASTER_EN		BIT(2)
>> +
>> +#define PCIE_BASE_ADDR0			(TYPE1_HDR_OFFSET + 0x10)
>> +#define PCIE_BASE_ADDR1			(TYPE1_HDR_OFFSET + 0x14)
>> +
>> +#define PCIE_CAP_OFFSET			0x70
>> +#define PCIE_DEV_CTRL_DEV_STUS		(PCIE_CAP_OFFSET + 0x08)
>> +#define PCIE_CAP_MAX_PAYLOAD_MASK	GENMASK(7, 5)
>> +#define PCIE_CAP_MAX_PAYLOAD_SIZE(x)	((x) << 5)
>> +#define PCIE_CAP_MAX_READ_REQ_MASK	GENMASK(14, 12)
>> +#define PCIE_CAP_MAX_READ_REQ_SIZE(x)	((x) << 12)
>> +
>> +#define PCI_CLASS_REVISION_MASK		GENMASK(7, 0)
>> +
>> +/* PCIe specific config registers */
>> +#define PCIE_CFG0			0x0
>> +#define APP_LTSSM_ENABLE		BIT(7)
>> +
>> +#define PCIE_CFG_STATUS12		0x30
>> +#define IS_SMLH_LINK_UP(x)		((x) & (1 << 6) ? 1 : 0)
>> +#define IS_RDLH_LINK_UP(x)		((x) & (1 << 16) ? 1 : 0)
>> +#define IS_LTSSM_UP(x)			((((x) >> 10) & 0x1f) == 0x11 ? 1 : 0)
> 
> those ternary ops are overkill

Yes, we will modify it.
#define IS_SMLH_LINK_UP(x) ((x) & (1 << 6))
#define IS_RDLH_LINK_UP(x) ((x) & (1 << 16) )
#define IS_LTSSM_UP(x) ((((x) >> 10) & 0x1f) == 0x11)

> 
>> +
>> +#define PCIE_CFG_STATUS17		0x44
>> +#define PM_CURRENT_STATE(x)		(((x) >> 7) & 0x1)
>> +
>> +#define WAIT_LINKUP_TIMEOUT		2000
>> +#define PORT_CLK_RATE			100000000UL
>> +#define MAX_PAYLOAD_SIZE		256
>> +#define MAX_READ_REQ_SIZE		256
>> +
>> +enum pcie_data_rate {
>> +	PCIE_GEN1,
>> +	PCIE_GEN2,
>> +	PCIE_GEN3,
>> +	PCIE_GEN4
>> +};
>> +
>> +struct meson_pcie_mem_res {
>> +	void __iomem *elbi_base; /* DT 0th resource */
>> +	void __iomem *cfg_base; /* DT 2nd resource */
>> +};
>> +
>> +struct meson_pcie_clk_res {
>> +	struct clk *clk;
>> +	struct clk *mipi_gate;
>> +	struct clk *port_clk;
>> +	struct clk *general_clk;
>> +};
>> +
>> +struct meson_pcie {
>> +	struct dw_pcie pci;
>> +	struct meson_pcie_mem_res mem_res;
>> +	struct meson_pcie_clk_res clk_res;
>> +	int reset_gpio;
>> +
>> +	struct phy *phy;
>> +	enum of_gpio_flags gpio_flag;
>> +	int pcie_num;
>> +	u32 port_num;
>> +	u32 device_attch;
>> +};
>> +
>> +static int meson_pcie_get_mem(struct platform_device *pdev,
>> +			      struct meson_pcie *mp)
>> +{
>> +	struct device *dev = mp->pci.dev;
>> +	struct resource *res;
>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
>> +	if (!res)
>> +		return -ENODEV;
>> +
>> +	mp->mem_res.elbi_base = devm_ioremap_resource(dev, res);
>> +	if (IS_ERR(mp->mem_res.elbi_base))
>> +		return PTR_ERR(mp->mem_res.elbi_base);
>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
>> +	if (!res)
>> +		return -ENODEV;
>> +
>> +	mp->mem_res.cfg_base = devm_ioremap_resource(dev, res);
>> +	if (IS_ERR(mp->mem_res.cfg_base))
>> +		return PTR_ERR(mp->mem_res.cfg_base);
>> +
>> +	return 0;
>> +}
>> +
>> +static int meson_pcie_init_clk(struct meson_pcie *mp)
>> +{
>> +	struct device *dev = mp->pci.dev;
>> +	struct meson_pcie_clk_res *res = &mp->clk_res;
>> +	int ret;
>> +
>> +	res->port_clk = devm_clk_get(dev, "port");
>> +	if (IS_ERR(res->port_clk)) {
>> +		if (PTR_ERR(res->port_clk) != -EPROBE_DEFER)
>> +			dev_err(dev, "Failed to get pcie port clock\n");
>> +
>> +		return PTR_ERR(res->port_clk);
>> +	}
>> +
>> +	res->mipi_gate = devm_clk_get(dev, "pcie_mipi_en");
>> +	if (IS_ERR(res->mipi_gate)) {
>> +		if (PTR_ERR(res->mipi_gate) != -EPROBE_DEFER)
>> +			dev_err(dev, "Failed to get pcie mipi clock\n");
>> +
>> +		return PTR_ERR(res->mipi_gate);
>> +	}
>> +
>> +	res->general_clk = devm_clk_get(dev, "pcie_general");
>> +	if (IS_ERR(res->general_clk)) {
>> +		if (PTR_ERR(res->general_clk) != -EPROBE_DEFER)
>> +			dev_err(dev, "Failed to get pcie general clock\n");
>> +
>> +		return PTR_ERR(res->general_clk);
>> +	}
>> +
>> +	res->clk = devm_clk_get(dev, "pcie");
>> +	if (IS_ERR(res->clk)) {
>> +		if (PTR_ERR(res->clk) != -EPROBE_DEFER)
>> +			dev_err(dev, "Failed to get pcie rc clock\n");
>> +
>> +		return PTR_ERR(res->clk);
>> +	}
>> +
>> +	phy_init(mp->phy);
>> +
>> +	ret = clk_set_rate(res->port_clk, PORT_CLK_RATE);
>> +	if (ret) {
>> +		dev_err(dev, "set bus clk rate failed, ret = %d", ret);
>> +		goto err_clk;
>> +	}
>> +
>> +	ret = clk_prepare_enable(res->port_clk);
>> +	if (ret) {
>> +		dev_err(dev, "cannot enable pcie port clock");
>> +		goto err_clk;
>> +	}
>> +
>> +	ret = clk_prepare_enable(res->mipi_gate);
>> +	if (ret) {
>> +		dev_err(dev, "cannot enable pcie mipi gate clock");
>> +		goto err_port_clk;
>> +	}
>> +
>> +	ret = clk_prepare_enable(res->general_clk);
>> +	if (ret) {
>> +		dev_err(dev, "cannot enable pcie general clock");
>> +		goto err_mipi_gate;
>> +	}
>> +
>> +	ret = clk_prepare_enable(res->clk);
>> +	if (ret) {
>> +		dev_err(dev, "cannot enable pcie rc clock");
>> +		goto err_general_clk;
>> +	}
>> +
>> +	return 0;
>> +
>> +err_general_clk:
>> +	clk_disable_unprepare(res->general_clk);
>> +err_mipi_gate:
>> +	clk_disable_unprepare(res->mipi_gate);
>> +err_port_clk:
>> +	clk_disable_unprepare(res->port_clk);
>> +err_clk:
>> +	return ret;
>> +}
>> +
>> +static void meson_pcie_deinit_clk(struct meson_pcie *mp)
>> +{
>> +	clk_disable_unprepare(mp->clk_res.clk);
>> +	clk_disable_unprepare(mp->clk_res.general_clk);
>> +	clk_disable_unprepare(mp->clk_res.mipi_gate);
>> +	clk_disable_unprepare(mp->clk_res.port_clk);
>> +}
>> +
>> +static inline void meson_elb_writel(struct meson_pcie *mp, u32 val, u32 reg)
>> +{
>> +	writel(val, mp->mem_res.elbi_base + reg);
>> +}
>> +
>> +static inline u32 meson_elb_readl(struct meson_pcie *mp, u32 reg)
>> +{
>> +	return readl(mp->mem_res.elbi_base + reg);
>> +}
>> +
>> +static inline u32 meson_cfg_readl(struct meson_pcie *mp, u32 reg)
>> +{
>> +	return readl(mp->mem_res.cfg_base + reg);
>> +}
>> +
>> +static inline void meson_cfg_writel(struct meson_pcie *mp, u32 val, u32 reg)
>> +{
>> +	writel(val, mp->mem_res.cfg_base + reg);
>> +}
>> +
>> +static void meson_pcie_assert_reset(struct meson_pcie *mp)
>> +{
>> +	int val;
>> +
>> +	if (!(gpio_is_valid(mp->reset_gpio)))
>> +		return;
> 
> if you use devm_gpiod_get() to get the gpio, this is not required

Right, this is unnecessary, I will delete it.

> 
>> +
>> +	if (mp->gpio_flag & OF_GPIO_OPEN_DRAIN) {
>> +		val = mp->gpio_flag & OF_GPIO_ACTIVE_LOW ? 1 : 0;
> 
> handling active low should be up to gpiolib ... not open coded

Yes, we had a really bad ieda here.

> 
>> +		gpio_direction_output(mp->reset_gpio, val);
>> +		udelay(500);
>> +		gpio_direction_input(mp->reset_gpio);
>> +	} else {
>> +		val = mp->gpio_flag & OF_GPIO_ACTIVE_LOW ? 1 : 0;
>> +		gpio_set_value_cansleep(mp->reset_gpio, val);
>> +		udelay(500);
>> +		val = mp->gpio_flag & OF_GPIO_ACTIVE_LOW ? 0 : 1;
>> +		gpio_set_value_cansleep(mp->reset_gpio, val);
>> +	}
> 
> I'm a bit puzzled by this. Should this OPEN_DRAIN thing be handled in the
> GPIO/PINCTRL driver ?

Yes, we will fix it. 

Thanks for your suggestions.

> 
>> +}
>> +
>> +static void meson_pcie_init_dw(struct meson_pcie *mp)
>> +{
>> +	u32 val = 0;
>> +
>> +	val = meson_cfg_readl(mp, PCIE_CFG0);
>> +	val |= APP_LTSSM_ENABLE;
>> +	meson_cfg_writel(mp, val, PCIE_CFG0);
>> +
>> +	val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
>> +	val &= ~LINK_CAPABLE_MASK;
>> +	meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
>> +
>> +	val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
>> +	val |= LINK_CAPABLE_X1 | FAST_LINK_MODE;
>> +	meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
>> +
>> +	val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
>> +	val &= ~NUM_OF_LANES_MASK;
>> +	meson_elb_writel(mp, val, PCIE_GEN2_CTRL_OFF);
>> +
>> +	val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
>> +	val |= NUM_OF_LANES_X1 | DIRECT_SPEED_CHANGE;
>> +	meson_elb_writel(mp, val, PCIE_GEN2_CTRL_OFF);
>> +
>> +	meson_elb_writel(mp, 0x0, PCIE_BASE_ADDR0);
>> +	meson_elb_writel(mp, 0x0, PCIE_BASE_ADDR1);
>> +}
>> +
>> +static int meson_size_to_payload(int size)
>> +{
>> +	if (size & (size - 1) || size < 128 || size > 4096)
>> +		return 1;
>> +
>> +	return fls(size) - 8;
>> +}
>> +
>> +static void meson_set_max_payload(struct meson_pcie *mp, int size)
>> +{
>> +	u32 val = 0;
>> +	int max_payload_size = meson_size_to_payload(size);
>> +
>> +	val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> +	val &= ~PCIE_CAP_MAX_PAYLOAD_MASK;
>> +	meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +
>> +	val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> +	val |= PCIE_CAP_MAX_PAYLOAD_SIZE(max_payload_size);
>> +	meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +}
>> +
>> +static void meson_set_max_rd_req_size(struct meson_pcie *mp, int size)
>> +{
>> +	u32 val = 0;
>> +	int max_rd_req_size = meson_size_to_payload(size);
>> +
>> +	val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> +	val &= ~PCIE_CAP_MAX_READ_REQ_MASK;
>> +	meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +
>> +	val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> +	val |= PCIE_CAP_MAX_READ_REQ_SIZE(max_rd_req_size);
>> +	meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +}
>> +
>> +static inline void meson_enable_memory_space(struct meson_pcie *mp)
>> +{
>> +	/* Set the RC Bus Master, Memory Space and I/O Space enables */
>> +	meson_elb_writel(mp, PCI_IO_EN | PCI_MEM_SPACE_EN | PCI_BUS_MASTER_EN,
>> +			 PCIE_STATUS_COMMAND);
>> +}
>> +
>> +static int meson_pcie_establish_link(struct meson_pcie *mp)
>> +{
>> +	struct dw_pcie *pci = &mp->pci;
>> +	struct pcie_port *pp = &pci->pp;
>> +
>> +	meson_pcie_init_dw(mp);
>> +	meson_set_max_payload(mp, MAX_PAYLOAD_SIZE);
>> +	meson_set_max_rd_req_size(mp, MAX_READ_REQ_SIZE);
>> +
>> +	dw_pcie_setup_rc(pp);
>> +	meson_enable_memory_space(mp);
>> +
>> +	meson_pcie_assert_reset(mp);
>> +
>> +	/* check if the link is up or not */
>> +	if (!dw_pcie_wait_for_link(pci))
>> +		return 0;
>> +
>> +	return -ETIMEDOUT;
>> +}
>> +
>> +static void meson_pcie_msi_init(struct meson_pcie *mp)
>> +{
>> +	struct pcie_port *pp = &mp->pci.pp;
>> +
>> +	dw_pcie_msi_init(pp);
>> +}
>> +
>> +static void meson_pcie_enable_interrupts(struct meson_pcie *mp)
>> +{
>> +	if (IS_ENABLED(CONFIG_PCI_MSI))
>> +		meson_pcie_msi_init(mp);
>> +}
>> +
>> +static u32 meson_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base,
>> +			       u32 reg, size_t size)
>> +{
>> +	u32 val;
>> +
>> +	dw_pcie_read(base + reg, size, &val);
>> +
>> +	return val;
>> +}
>> +
>> +static void meson_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base,
>> +				 u32 reg, size_t size, u32 val)
>> +{
>> +	dw_pcie_write(base + reg, size, val);
>> +}
>> +
>> +static int meson_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
>> +				  u32 *val)
>> +{
>> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> +	struct meson_pcie *mp = to_meson_pcie(pci);
>> +
>> +	if (!mp->device_attch)
>> +		return 0;
>> +
>> +	/* the device class is not reported correctly from the register */
>> +	if (where == PCI_CLASS_REVISION) {
>> +		*val = readl(pci->dbi_base + PCI_CLASS_REVISION);
>> +		/* keep revision id */
>> +		*val &= PCI_CLASS_REVISION_MASK;
>> +		*val |= PCI_CLASS_BRIDGE_PCI << 16;
>> +		return PCIBIOS_SUCCESSFUL;
>> +	}
>> +
>> +	return dw_pcie_read(pci->dbi_base + where, size, val);
>> +}
>> +
>> +static int meson_pcie_wr_own_conf(struct pcie_port *pp, int where,
>> +				  int size, u32 val)
>> +{
>> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> +	struct meson_pcie *mp = to_meson_pcie(pci);
>> +
>> +	if (!mp->device_attch)
>> +		return 0;
>> +
>> +	return dw_pcie_write(pci->dbi_base + where, size, val);
>> +}
>> +
>> +static int meson_pcie_link_up(struct dw_pcie *pci)
>> +{
>> +	struct meson_pcie *mp = to_meson_pcie(pci);
>> +	struct device *dev = pci->dev;
>> +	u32 smlh_up = 0;
>> +	u32 ltssm_up = 0;
>> +	u32 rdlh_up = 0;
>> +	u32 speed_okay = 0;
>> +	u32 cnt = 0;
>> +	u32 state12, state17;
>> +
>> +	while (smlh_up == 0 || rdlh_up == 0 || ltssm_up == 0 ||
>> +	       speed_okay == 0) {
>> +		udelay(20);
>> +
>> +		state12 = meson_cfg_readl(mp, PCIE_CFG_STATUS12);
>> +		state17 = meson_cfg_readl(mp, PCIE_CFG_STATUS17);
>> +		smlh_up = IS_SMLH_LINK_UP(state12);
>> +		rdlh_up = IS_RDLH_LINK_UP(state12);
>> +		ltssm_up = IS_LTSSM_UP(state12);
>> +
>> +		if (PM_CURRENT_STATE(state17) < PCIE_GEN3)
>> +			speed_okay = 1;
>> +
>> +		if (smlh_up)
>> +			dev_dbg(dev, "smlh_link_up is on\n");
>> +		if (rdlh_up)
>> +			dev_dbg(dev, "rdlh_link_up is on\n");
>> +		if (ltssm_up)
>> +			dev_dbg(dev, "ltssm_up is on\n");
>> +		if (speed_okay)
>> +			dev_dbg(dev, "speed_okay\n");
>> +
>> +		cnt++;
>> +
>> +		if (cnt >= WAIT_LINKUP_TIMEOUT) {
>> +			dev_err(dev, "Error: Wait linkup timeout.\n");
>> +			return 0;
>> +		}
>> +	}
>> +
>> +	return 1;
>> +}
>> +
>> +static int meson_pcie_host_init(struct pcie_port *pp)
>> +{
>> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> +	struct meson_pcie *mp = to_meson_pcie(pci);
>> +	int ret;
>> +
>> +	ret = meson_pcie_establish_link(mp);
>> +
>> +	if (ret)
>> +		return ret;
>> +
>> +	mp->device_attch = 1;
>> +	meson_pcie_enable_interrupts(mp);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct dw_pcie_host_ops meson_pcie_host_ops = {
>> +	.rd_own_conf = meson_pcie_rd_own_conf,
>> +	.wr_own_conf = meson_pcie_wr_own_conf,
>> +	.host_init = meson_pcie_host_init,
>> +};
>> +
>> +static int meson_add_pcie_port(struct meson_pcie *mp,
>> +			       struct platform_device *pdev)
>> +{
>> +	struct dw_pcie *pci = &mp->pci;
>> +	struct pcie_port *pp = &pci->pp;
>> +	struct device *dev = &pdev->dev;
>> +	int ret;
>> +
>> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
>> +		pp->msi_irq = platform_get_irq(pdev, 0);
>> +		if (pp->msi_irq < 0) {
>> +			dev_err(dev, "failed to get msi irq\n");
>> +			return pp->msi_irq;
>> +		}
>> +	}
>> +
>> +	pp->root_bus_nr = -1;
>> +	pp->ops = &meson_pcie_host_ops;
>> +	pci->dbi_base = mp->mem_res.elbi_base;
>> +
>> +	ret = dw_pcie_host_init(pp);
>> +	if (ret) {
>> +		dev_err(dev, "failed to initialize host\n");
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct dw_pcie_ops dw_pcie_ops = {
>> +	.read_dbi = meson_pcie_read_dbi,
>> +	.write_dbi = meson_pcie_write_dbi,
>> +	.link_up = meson_pcie_link_up,
>> +};
>> +
>> +static int meson_pcie_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct device_node *np = dev->of_node;
>> +	struct dw_pcie *pci;
>> +	struct meson_pcie *mp;
>> +	int ret;
>> +
>> +	mp = devm_kzalloc(dev, sizeof(*mp), GFP_KERNEL);
>> +	if (!mp)
>> +		return -ENOMEM;
>> +
>> +	pci = &mp->pci;
>> +	pci->dev = dev;
>> +	pci->ops = &dw_pcie_ops;
>> +
>> +	mp->reset_gpio = of_get_named_gpio_flags(np, "reset-gpio", 0,
>> +						 &mp->gpio_flag);
>> +	if (mp->reset_gpio >= 0)
>> +		devm_gpio_request(dev, mp->reset_gpio, "RESET");
> 
> devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> 
> 
>> +
>> +	if (of_property_read_u32(np, "pcie-num", &mp->pcie_num))
>> +		dev_err(dev, "Get pcie-num failed, set default %d\n",
>> +			mp->pcie_num);
> 
> What's the use of this ?
> 
>> +
>> +	mp->phy = devm_of_phy_get(dev, np, NULL);
>> +	if (IS_ERR(mp->phy)) {
>> +		if (PTR_ERR(mp->phy) != -EPROBE_DEFER)
>> +			dev_err(dev, "Get phy failed, set default %ld\n",
>> +				PTR_ERR(mp->phy));
>> +
>> +		return PTR_ERR(mp->phy);
>> +	}
>> +
>> +	phy_power_on(mp->phy);
>> +
>> +	ret = meson_pcie_init_clk(mp);
>> +	if (ret) {
>> +		dev_err(dev, "Init clock resources failed, %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ret = meson_pcie_get_mem(pdev, mp);
>> +	if (ret) {
>> +		dev_err(dev, "Get memory resource failed, %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	platform_set_drvdata(pdev, mp);
>> +
>> +	ret = meson_add_pcie_port(mp, pdev);
>> +	if (ret < 0) {
>> +		dev_err(dev, "Add PCIE port failed, %d\n", ret);
>> +		meson_pcie_deinit_clk(mp);
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static const struct of_device_id meson_pcie_of_match[] = {
>> +	{
>> +		.compatible = "amlogic,axg-pcie",
>> +	},
>> +	{},
>> +};
>> +
>> +static struct platform_driver meson_pcie_driver = {
>> +	.probe = meson_pcie_probe,
>> +	.driver = {
>> +		.name = "meson-pcie",
>> +		.of_match_table = meson_pcie_of_match,
>> +	},
>> +};
>> +
>> +builtin_platform_driver(meson_pcie_driver);
> 
> 
> .
>