[PATCH 7/7] gpio: ingenic: Remove driver
From: Paul Cercueil
Date: Thu Aug 16 2018 - 12:36:28 EST
The pinctrl-ingenic driver is now handling the GPIO chips directly.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
.../devicetree/bindings/gpio/ingenic,gpio.txt | 46 ---
drivers/gpio/Kconfig | 11 -
drivers/gpio/Makefile | 1 -
drivers/gpio/gpio-ingenic.c | 392 ---------------------
4 files changed, 450 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
delete mode 100644 drivers/gpio/gpio-ingenic.c
diff --git a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
deleted file mode 100644
index 7988aeb725f4..000000000000
--- a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Ingenic jz47xx GPIO controller
-
-That the Ingenic GPIO driver node must be a sub-node of the Ingenic pinctrl
-driver node.
-
-Required properties:
---------------------
-
- - compatible: Must contain one of:
- - "ingenic,jz4740-gpio"
- - "ingenic,jz4770-gpio"
- - "ingenic,jz4780-gpio"
- - reg: The GPIO bank number.
- - interrupt-controller: Marks the device node as an interrupt controller.
- - interrupts: Interrupt specifier for the controllers interrupt.
- - #interrupt-cells: Should be 2. Refer to
- ../interrupt-controller/interrupts.txt for more details.
- - gpio-controller: Marks the device node as a GPIO controller.
- - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
- cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
- GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
- - gpio-ranges: Range of pins managed by the GPIO controller. Refer to
- 'gpio.txt' in this directory for more details.
-
-Example:
---------
-
-&pinctrl {
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpa: gpio@0 {
- compatible = "ingenic,jz4740-gpio";
- reg = <0>;
-
- gpio-controller;
- gpio-ranges = <&pinctrl 0 0 32>;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
-
- interrupt-parent = <&intc>;
- interrupts = <28>;
- };
-};
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 71c0ab46f216..d8c9026010b7 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -267,17 +267,6 @@ config GPIO_ICH
If unsure, say N.
-config GPIO_INGENIC
- tristate "Ingenic JZ47xx SoCs GPIO support"
- depends on OF
- depends on MACH_INGENIC || COMPILE_TEST
- select GPIOLIB_IRQCHIP
- help
- Say yes here to support the GPIO functionality present on the
- JZ4740 and JZ4780 SoCs from Ingenic.
-
- If unsure, say N.
-
config GPIO_IOP
tristate "Intel IOP GPIO"
depends on ARCH_IOP32X || ARCH_IOP33X || COMPILE_TEST
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 1324c8f966a7..b2b07c787743 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -57,7 +57,6 @@ obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
obj-$(CONFIG_GPIO_HLWD) += gpio-hlwd.o
obj-$(CONFIG_HTC_EGPIO) += gpio-htc-egpio.o
obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
-obj-$(CONFIG_GPIO_INGENIC) += gpio-ingenic.o
obj-$(CONFIG_GPIO_IOP) += gpio-iop.o
obj-$(CONFIG_GPIO_IT87) += gpio-it87.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
diff --git a/drivers/gpio/gpio-ingenic.c b/drivers/gpio/gpio-ingenic.c
deleted file mode 100644
index e738e384a5ca..000000000000
--- a/drivers/gpio/gpio-ingenic.c
+++ /dev/null
@@ -1,392 +0,0 @@
-/*
- * Ingenic JZ47xx GPIO driver
- *
- * Copyright (c) 2017 Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/gpio/driver.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
-#include <linux/pinctrl/consumer.h>
-#include <linux/regmap.h>
-
-#define GPIO_PIN 0x00
-#define GPIO_MSK 0x20
-
-#define JZ4740_GPIO_DATA 0x10
-#define JZ4740_GPIO_SELECT 0x50
-#define JZ4740_GPIO_DIR 0x60
-#define JZ4740_GPIO_TRIG 0x70
-#define JZ4740_GPIO_FLAG 0x80
-
-#define JZ4770_GPIO_INT 0x10
-#define JZ4770_GPIO_PAT1 0x30
-#define JZ4770_GPIO_PAT0 0x40
-#define JZ4770_GPIO_FLAG 0x50
-
-#define REG_SET(x) ((x) + 0x4)
-#define REG_CLEAR(x) ((x) + 0x8)
-
-enum jz_version {
- ID_JZ4740,
- ID_JZ4770,
- ID_JZ4780,
-};
-
-struct ingenic_gpio_chip {
- struct regmap *map;
- struct gpio_chip gc;
- struct irq_chip irq_chip;
- unsigned int irq, reg_base;
- enum jz_version version;
-};
-
-static u32 gpio_ingenic_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
-{
- unsigned int val;
-
- regmap_read(jzgc->map, jzgc->reg_base + reg, &val);
-
- return (u32) val;
-}
-
-static void gpio_ingenic_set_bit(struct ingenic_gpio_chip *jzgc,
- u8 reg, u8 offset, bool set)
-{
- if (set)
- reg = REG_SET(reg);
- else
- reg = REG_CLEAR(reg);
-
- regmap_write(jzgc->map, jzgc->reg_base + reg, BIT(offset));
-}
-
-static inline bool gpio_get_value(struct ingenic_gpio_chip *jzgc, u8 offset)
-{
- unsigned int val = gpio_ingenic_read_reg(jzgc, GPIO_PIN);
-
- return !!(val & BIT(offset));
-}
-
-static void gpio_set_value(struct ingenic_gpio_chip *jzgc, u8 offset, int value)
-{
- if (jzgc->version >= ID_JZ4770)
- gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_PAT0, offset, !!value);
- else
- gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_DATA, offset, !!value);
-}
-
-static void irq_set_type(struct ingenic_gpio_chip *jzgc,
- u8 offset, unsigned int type)
-{
- u8 reg1, reg2;
-
- if (jzgc->version >= ID_JZ4770) {
- reg1 = JZ4770_GPIO_PAT1;
- reg2 = JZ4770_GPIO_PAT0;
- } else {
- reg1 = JZ4740_GPIO_TRIG;
- reg2 = JZ4740_GPIO_DIR;
- }
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- gpio_ingenic_set_bit(jzgc, reg2, offset, true);
- gpio_ingenic_set_bit(jzgc, reg1, offset, true);
- break;
- case IRQ_TYPE_EDGE_FALLING:
- gpio_ingenic_set_bit(jzgc, reg2, offset, false);
- gpio_ingenic_set_bit(jzgc, reg1, offset, true);
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- gpio_ingenic_set_bit(jzgc, reg2, offset, true);
- gpio_ingenic_set_bit(jzgc, reg1, offset, false);
- break;
- case IRQ_TYPE_LEVEL_LOW:
- default:
- gpio_ingenic_set_bit(jzgc, reg2, offset, false);
- gpio_ingenic_set_bit(jzgc, reg1, offset, false);
- break;
- }
-}
-
-static void ingenic_gpio_irq_mask(struct irq_data *irqd)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
- struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
-
- gpio_ingenic_set_bit(jzgc, GPIO_MSK, irqd->hwirq, true);
-}
-
-static void ingenic_gpio_irq_unmask(struct irq_data *irqd)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
- struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
-
- gpio_ingenic_set_bit(jzgc, GPIO_MSK, irqd->hwirq, false);
-}
-
-static void ingenic_gpio_irq_enable(struct irq_data *irqd)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
- struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
- int irq = irqd->hwirq;
-
- if (jzgc->version >= ID_JZ4770)
- gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_INT, irq, true);
- else
- gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, true);
-
- ingenic_gpio_irq_unmask(irqd);
-}
-
-static void ingenic_gpio_irq_disable(struct irq_data *irqd)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
- struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
- int irq = irqd->hwirq;
-
- ingenic_gpio_irq_mask(irqd);
-
- if (jzgc->version >= ID_JZ4770)
- gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_INT, irq, false);
- else
- gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, false);
-}
-
-static void ingenic_gpio_irq_ack(struct irq_data *irqd)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
- struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
- int irq = irqd->hwirq;
- bool high;
-
- if (irqd_get_trigger_type(irqd) == IRQ_TYPE_EDGE_BOTH) {
- /*
- * Switch to an interrupt for the opposite edge to the one that
- * triggered the interrupt being ACKed.
- */
- high = gpio_get_value(jzgc, irq);
- if (high)
- irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_FALLING);
- else
- irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_RISING);
- }
-
- if (jzgc->version >= ID_JZ4770)
- gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_FLAG, irq, false);
- else
- gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_DATA, irq, true);
-}
-
-static int ingenic_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
- struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
-
- switch (type) {
- case IRQ_TYPE_EDGE_BOTH:
- case IRQ_TYPE_EDGE_RISING:
- case IRQ_TYPE_EDGE_FALLING:
- irq_set_handler_locked(irqd, handle_edge_irq);
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- case IRQ_TYPE_LEVEL_LOW:
- irq_set_handler_locked(irqd, handle_level_irq);
- break;
- default:
- irq_set_handler_locked(irqd, handle_bad_irq);
- }
-
- if (type == IRQ_TYPE_EDGE_BOTH) {
- /*
- * The hardware does not support interrupts on both edges. The
- * best we can do is to set up a single-edge interrupt and then
- * switch to the opposing edge when ACKing the interrupt.
- */
- bool high = gpio_get_value(jzgc, irqd->hwirq);
-
- type = high ? IRQ_TYPE_EDGE_FALLING : IRQ_TYPE_EDGE_RISING;
- }
-
- irq_set_type(jzgc, irqd->hwirq, type);
- return 0;
-}
-
-static int ingenic_gpio_irq_set_wake(struct irq_data *irqd, unsigned int on)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
- struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
-
- return irq_set_irq_wake(jzgc->irq, on);
-}
-
-static void ingenic_gpio_irq_handler(struct irq_desc *desc)
-{
- struct gpio_chip *gc = irq_desc_get_handler_data(desc);
- struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
- struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data);
- unsigned long flag, i;
-
- chained_irq_enter(irq_chip, desc);
-
- if (jzgc->version >= ID_JZ4770)
- flag = gpio_ingenic_read_reg(jzgc, JZ4770_GPIO_FLAG);
- else
- flag = gpio_ingenic_read_reg(jzgc, JZ4740_GPIO_FLAG);
-
- for_each_set_bit(i, &flag, 32)
- generic_handle_irq(irq_linear_revmap(gc->irq.domain, i));
- chained_irq_exit(irq_chip, desc);
-}
-
-static void ingenic_gpio_set(struct gpio_chip *gc,
- unsigned int offset, int value)
-{
- struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
-
- gpio_set_value(jzgc, offset, value);
-}
-
-static int ingenic_gpio_get(struct gpio_chip *gc, unsigned int offset)
-{
- struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
-
- return (int) gpio_get_value(jzgc, offset);
-}
-
-static int ingenic_gpio_direction_input(struct gpio_chip *gc,
- unsigned int offset)
-{
- return pinctrl_gpio_direction_input(gc->base + offset);
-}
-
-static int ingenic_gpio_direction_output(struct gpio_chip *gc,
- unsigned int offset, int value)
-{
- ingenic_gpio_set(gc, offset, value);
- return pinctrl_gpio_direction_output(gc->base + offset);
-}
-
-static const struct of_device_id ingenic_gpio_of_match[] = {
- { .compatible = "ingenic,jz4740-gpio", .data = (void *)ID_JZ4740 },
- { .compatible = "ingenic,jz4770-gpio", .data = (void *)ID_JZ4770 },
- { .compatible = "ingenic,jz4780-gpio", .data = (void *)ID_JZ4780 },
- {},
-};
-MODULE_DEVICE_TABLE(of, ingenic_gpio_of_match);
-
-static int ingenic_gpio_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct ingenic_gpio_chip *jzgc;
- u32 bank;
- int err;
-
- jzgc = devm_kzalloc(dev, sizeof(*jzgc), GFP_KERNEL);
- if (!jzgc)
- return -ENOMEM;
-
- jzgc->map = dev_get_drvdata(dev->parent);
- if (!jzgc->map) {
- dev_err(dev, "Cannot get parent regmap\n");
- return -ENXIO;
- }
-
- err = of_property_read_u32(dev->of_node, "reg", &bank);
- if (err) {
- dev_err(dev, "Cannot read \"reg\" property: %i\n", err);
- return err;
- }
-
- jzgc->reg_base = bank * 0x100;
-
- jzgc->gc.label = devm_kasprintf(dev, GFP_KERNEL, "GPIO%c", 'A' + bank);
- if (!jzgc->gc.label)
- return -ENOMEM;
-
- /* DO NOT EXPAND THIS: FOR BACKWARD GPIO NUMBERSPACE COMPATIBIBILITY
- * ONLY: WORK TO TRANSITION CONSUMERS TO USE THE GPIO DESCRIPTOR API IN
- * <linux/gpio/consumer.h> INSTEAD.
- */
- jzgc->gc.base = bank * 32;
-
- jzgc->gc.ngpio = 32;
- jzgc->gc.parent = dev;
- jzgc->gc.of_node = dev->of_node;
- jzgc->gc.owner = THIS_MODULE;
- jzgc->version = (enum jz_version)of_device_get_match_data(dev);
-
- jzgc->gc.set = ingenic_gpio_set;
- jzgc->gc.get = ingenic_gpio_get;
- jzgc->gc.direction_input = ingenic_gpio_direction_input;
- jzgc->gc.direction_output = ingenic_gpio_direction_output;
-
- if (of_property_read_bool(dev->of_node, "gpio-ranges")) {
- jzgc->gc.request = gpiochip_generic_request;
- jzgc->gc.free = gpiochip_generic_free;
- }
-
- err = devm_gpiochip_add_data(dev, &jzgc->gc, jzgc);
- if (err)
- return err;
-
- jzgc->irq = irq_of_parse_and_map(dev->of_node, 0);
- if (!jzgc->irq)
- return -EINVAL;
-
- jzgc->irq_chip.name = jzgc->gc.label;
- jzgc->irq_chip.irq_enable = ingenic_gpio_irq_enable;
- jzgc->irq_chip.irq_disable = ingenic_gpio_irq_disable;
- jzgc->irq_chip.irq_unmask = ingenic_gpio_irq_unmask;
- jzgc->irq_chip.irq_mask = ingenic_gpio_irq_mask;
- jzgc->irq_chip.irq_ack = ingenic_gpio_irq_ack;
- jzgc->irq_chip.irq_set_type = ingenic_gpio_irq_set_type;
- jzgc->irq_chip.irq_set_wake = ingenic_gpio_irq_set_wake;
- jzgc->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND;
-
- err = gpiochip_irqchip_add(&jzgc->gc, &jzgc->irq_chip, 0,
- handle_level_irq, IRQ_TYPE_NONE);
- if (err)
- return err;
-
- gpiochip_set_chained_irqchip(&jzgc->gc, &jzgc->irq_chip,
- jzgc->irq, ingenic_gpio_irq_handler);
- return 0;
-}
-
-static int ingenic_gpio_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static struct platform_driver ingenic_gpio_driver = {
- .driver = {
- .name = "gpio-ingenic",
- .of_match_table = of_match_ptr(ingenic_gpio_of_match),
- },
- .probe = ingenic_gpio_probe,
- .remove = ingenic_gpio_remove,
-};
-
-static int __init ingenic_gpio_drv_register(void)
-{
- return platform_driver_register(&ingenic_gpio_driver);
-}
-subsys_initcall(ingenic_gpio_drv_register);
-
-static void __exit ingenic_gpio_drv_unregister(void)
-{
- platform_driver_unregister(&ingenic_gpio_driver);
-}
-module_exit(ingenic_gpio_drv_unregister);
-
-MODULE_AUTHOR("Paul Cercueil <paul@xxxxxxxxxxxxxxx>");
-MODULE_DESCRIPTION("Ingenic JZ47xx GPIO driver");
-MODULE_LICENSE("GPL");
--
2.11.0