Re: [PATCH v4 1/2] dt-bindings: leds: Add bindings for lm3697 driver

[Jacek Anaszewski]

Hi Dan,

Thanks for the update.

I have one remark below.

On 08/16/2018 07:20 PM, Dan Murphy wrote:
> Add the device tree bindings for the lm3697
> LED driver for backlighting and display.
> 
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> ---
> 
> v4 - Removed HVLED definition in favor of HVLED place definition - https://lore.kernel.org/patchwork/patch/974812/
> v3 - Updated subject with prefered title - https://lore.kernel.org/patchwork/patch/972337/
> v2 - Fixed subject and patch commit message - https://lore.kernel.org/patchwork/patch/971326/
> 
>  .../devicetree/bindings/leds/leds-lm3697.txt  | 86 +++++++++++++++++++
>  1 file changed, 86 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3697.txt
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-lm3697.txt b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
> new file mode 100644
> index 000000000000..bcd67d53c889
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
> @@ -0,0 +1,86 @@
> +* Texas Instruments - LM3697 Highly Efficient White LED Driver
> +
> +The LM3697 11-bit LED driver provides high-
> +performance backlight dimming for 1, 2, or 3 series
> +LED strings while delivering up to 90% efficiency.
> +
> +This device is suitable for Display and Keypad Lighting
> +
> +Required properties:
> +	- compatible:
> +		"ti,lm3967"
> +	- reg :  I2C slave address
> +	- #address-cells : 1
> +	- #size-cells : 0
> +
> +Optional properties:
> +	- enable-gpios : gpio pin to enable/disable the device.
> +	- vled-supply : LED supply
> +
> +Required child properties:
> +	- reg : 0 - LED is Controlled by bank A
> +		1 - LED is Controlled by bank B
> +	- led-sources : Indicates which HVLED string is associated to which
> +			control bank.  Each element in the array is associated
> +			with a specific HVLED string.  Element 0 is HVLED1,
> +			element 1 is HVLED2 and element 2 HVLED3.
> +			Additional information is contained
> +			in Documentation/devicetree/bindings/leds/common.txt
> +			0 - HVLED is not active in this control bank
> +			1 - HVLED string is controlled by this control bank
> +
> +Optional child properties:
> +	- label : see Documentation/devicetree/bindings/leds/common.txt
> +	- linux,default-trigger :
> +	   see Documentation/devicetree/bindings/leds/common.txt
> +
> +Example:
> +
> +HVLED string 1 and 2 controlled by control bank A and HVLED string controlled by

s/1 and 2/1 and 3/
s/HVLED string controller/HVLED string 2 controlled/

> +control bank B.
> +
> +led-controller@36 {
> +	compatible = "ti,lm3967";
> +	reg = <0x36>;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> +	vled-supply = <&vbatt>;
> +
> +	led@0 {
> +		reg = <0>;
> +		led-sources = <1 0 1>;
> +		label = "white:first_backlight_cluster";
> +		linux,default-trigger = "backlight";
> +	};
> +
> +	led@1 {
> +		reg = <1>;
> +		led-sources = <0 1 0>;
> +		label = "white:second_backlight_cluster";
> +		linux,default-trigger = "backlight";
> +	};
> +}
> +
> +All HVLED strings controlled by control bank A
> +
> +led-controller@36 {
> +	compatible = "ti,lm3967";
> +	reg = <0x36>;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> +	vled-supply = <&vbatt>;
> +
> +	led@0 {
> +		reg = <0>;
> +		led-sources = <1 1 1>;
> +		label = "white:backlight_cluster";
> +		linux,default-trigger = "backlight";
> +	};
> +}
> +
> +For more product information please see the link below:
> +http://www.ti.com/lit/ds/symlink/lm3697.pdf
> 

-- 
Best regards,
Jacek Anaszewski