Re: [PATCH v6 1/2] iio: light: Add support for vishay vcnl4035
From: Marcus Folkesson
Date: Sun Aug 19 2018 - 17:51:16 EST
Hi,
On Tue, Aug 07, 2018 at 12:27:03PM +0200, Parthiban Nallathambi wrote:
> Add support for VCNL4035, which is capable of Ambient light
> sensing (ALS) and proximity function. This patch adds support
> only for ALS function
>
> Signed-off-by: Parthiban Nallathambi <pn@xxxxxxx>
>
> Changelog since v1:
>
> 1. Fixed 0-day warning on le16_to_cpu usage
> 2. Persistence value is directly mapped to datasheet's value to
> avoid confusions of usage from sysfs
>
> Changelog in v3:
> - Usage of lock is not needed, removed mutex locking
> - ALS threshold and persistence configuration available
> as events and threshold events are notified to userspace
> - Usage of devm_ is re-ordered and exit handling updated
> - Complexity in timestamp calculation is removed and used
> iio_get_time_ns
>
> Changelog in v4:
> - New white light index is introduced for getting data from
> white spectrum
> - PM enable/disable is called from read_raw accordingly
> - Probe exit handling re-ordered
>
> Changelog in v5:
> - White spectrum is mesaured as "_CLEAR" intesity, so removed
> white spectrum modifier
> - Header re-ordering
> - Trigger init and de-init into separate function
> - Indentation correct and usage of dev_err in place of pr_err
>
> Changelog in v6:
> - Usage of devm_ for trigger probing and cleanups
> - pm_runtime re-order and exit patch corrections
> - IIO_INTENSITY to IIO_LIGHT, lux/steps are fixed at IT cycle
> lux can be calculated based on IT sensitivity
> - _CLEAR to _BOTH although measurement is only WHITE spectrum
> for traditional reasons
> ---
As Jonathan already pointed out, the changelog should go here.
A tip is to use notes (see `man git-notes`) to add a changelog and then
generate the patches with `git format-patch --notes <SHA>`.
I find it really neat.
> drivers/iio/light/Kconfig | 12 +
> drivers/iio/light/Makefile | 1 +
> drivers/iio/light/vcnl4035.c | 686 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 699 insertions(+)
> create mode 100644 drivers/iio/light/vcnl4035.c
>
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index c7ef8d1862d6..b7069a4c28a2 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -447,6 +447,18 @@ config VCNL4000
> To compile this driver as a module, choose M here: the
> module will be called vcnl4000.
>
> +config VCNL4035
> + tristate "VCNL4035 combined ALS and proximity sensor"
> + select REGMAP_I2C
> + depends on I2C
> + help
> + Say Y here if you want to build a driver for the Vishay VCNL4035,
> + combined ambient light (ALS) and proximity sensor. Currently only ALS
> + function is available.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called vcnl4035.
> +
> config VEML6070
> tristate "VEML6070 UV A light sensor"
> depends on I2C
> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
> index 80943af5d627..dce98511a59b 100644
> --- a/drivers/iio/light/Makefile
> +++ b/drivers/iio/light/Makefile
> @@ -44,6 +44,7 @@ obj-$(CONFIG_TSL2772) += tsl2772.o
> obj-$(CONFIG_TSL4531) += tsl4531.o
> obj-$(CONFIG_US5182D) += us5182d.o
> obj-$(CONFIG_VCNL4000) += vcnl4000.o
> +obj-$(CONFIG_VCNL4035) += vcnl4035.o
> obj-$(CONFIG_VEML6070) += veml6070.o
> obj-$(CONFIG_VL6180) += vl6180.o
> obj-$(CONFIG_ZOPT2201) += zopt2201.o
> diff --git a/drivers/iio/light/vcnl4035.c b/drivers/iio/light/vcnl4035.c
> new file mode 100644
> index 000000000000..e9f471d93a15
> --- /dev/null
> +++ b/drivers/iio/light/vcnl4035.c
> @@ -0,0 +1,686 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * VCNL4035 Ambient Light and Proximity Sensor - 7-bit I2C slave address 0x60
> + *
> + * Copyright (c) 2018, DENX Software Engineering GmbH
> + * Author: Parthiban Nallathambi <pn@xxxxxxx>
> + *
> + *
> + * TODO: Proximity
> + */
> +#include <linux/bitops.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/events.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
> +
> +#define VCNL4035_DRV_NAME "vcnl4035"
> +#define VCNL4035_IRQ_NAME "vcnl4035_event"
> +#define VCNL4035_REGMAP_NAME "vcnl4035_regmap"
> +
> +/* Device registers */
> +#define VCNL4035_ALS_CONF 0x00
> +#define VCNL4035_ALS_THDH 0x01
> +#define VCNL4035_ALS_THDL 0x02
> +#define VCNL4035_ALS_DATA 0x0B
> +#define VCNL4035_WHITE_DATA 0x0C
> +#define VCNL4035_INT_FLAG 0x0D
> +#define VCNL4035_DEV_ID 0x0E
> +
> +/* Register masks */
> +#define VCNL4035_MODE_ALS_MASK BIT(0)
> +#define VCNL4035_MODE_ALS_WHITE_CHAN BIT(8)
> +#define VCNL4035_MODE_ALS_INT_MASK BIT(1)
> +#define VCNL4035_ALS_IT_MASK GENMASK(7, 5)
> +#define VCNL4035_ALS_PERS_MASK GENMASK(3, 2)
> +#define VCNL4035_INT_ALS_IF_H_MASK BIT(12)
> +#define VCNL4035_INT_ALS_IF_L_MASK BIT(13)
> +
> +/* Default values */
> +#define VCNL4035_MODE_ALS_ENABLE BIT(0)
> +#define VCNL4035_MODE_ALS_DISABLE 0x00
> +#define VCNL4035_MODE_ALS_INT_ENABLE BIT(1)
> +#define VCNL4035_MODE_ALS_INT_DISABLE 0
> +#define VCNL4035_DEV_ID_VAL 0x80
> +#define VCNL4035_ALS_IT_DEFAULT 0x01
> +#define VCNL4035_ALS_PERS_DEFAULT 0x00
> +#define VCNL4035_ALS_THDH_DEFAULT 5000
> +#define VCNL4035_ALS_THDL_DEFAULT 100
> +#define VCNL4035_SLEEP_DELAY_MS 2000
> +
> +struct vcnl4035_data {
> + struct i2c_client *client;
> + struct regmap *regmap;
> + unsigned int als_it_val;
> + unsigned int als_persistence:4;
> + unsigned int als_thresh_low;
> + unsigned int als_thresh_high;
> + struct iio_trigger *drdy_trigger0;
> +};
> +
> +static inline bool vcnl4035_is_triggered(struct vcnl4035_data *data)
> +{
> + int ret;
> + int reg;
> +
> + ret = regmap_read(data->regmap, VCNL4035_INT_FLAG, ®);
> + if (ret < 0)
> + return false;
> +
> + return !!(reg &
> + (VCNL4035_INT_ALS_IF_H_MASK | VCNL4035_INT_ALS_IF_L_MASK));
> +}
> +
> +static irqreturn_t vcnl4035_drdy_irq_thread(int irq, void *private)
> +{
> + struct iio_dev *indio_dev = private;
> + struct vcnl4035_data *data = iio_priv(indio_dev);
> +
> + if (vcnl4035_is_triggered(data)) {
> + iio_push_event(indio_dev, IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
> + 0,
> + IIO_EV_TYPE_THRESH,
> + IIO_EV_DIR_EITHER),
> + iio_get_time_ns(indio_dev));
> + iio_trigger_poll_chained(data->drdy_trigger0);
> + return IRQ_HANDLED;
> + }
> +
> + return IRQ_NONE;
> +}
> +
> +/* Triggered buffer */
> +static irqreturn_t vcnl4035_trigger_consumer_handler(int irq, void *p)
> +{
> + struct iio_poll_func *pf = p;
> + struct iio_dev *indio_dev = pf->indio_dev;
> + struct vcnl4035_data *data = iio_priv(indio_dev);
> + u8 buffer[ALIGN(sizeof(u16), sizeof(s64)) + sizeof(s64)];
> + int ret;
> +
> + ret = regmap_read(data->regmap, VCNL4035_ALS_DATA, (int *)buffer);
> + if (ret < 0) {
> + dev_err(&data->client->dev,
> + "Trigger consumer can't read from sensor.\n");
> + goto fail_read;
> + }
> + iio_push_to_buffers_with_timestamp(indio_dev, buffer,
> + iio_get_time_ns(indio_dev));
> +
> +fail_read:
> + iio_trigger_notify_done(indio_dev->trig);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int vcnl4035_als_drdy_set_state(struct iio_trigger *trigger,
> + bool enable_drdy)
> +{
> + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trigger);
> + struct vcnl4035_data *data = iio_priv(indio_dev);
> + int val = enable_drdy ? VCNL4035_MODE_ALS_INT_ENABLE :
> + VCNL4035_MODE_ALS_INT_DISABLE;
> +
> + return regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
> + VCNL4035_MODE_ALS_INT_MASK,
> + val);
> +}
> +
> +static const struct iio_trigger_ops vcnl4035_trigger_ops = {
> + .validate_device = iio_trigger_validate_own_device,
> + .set_trigger_state = vcnl4035_als_drdy_set_state,
> +};
> +
> +static int vcnl4035_set_pm_runtime_state(struct vcnl4035_data *data, bool on)
> +{
> + int ret;
> + struct device *dev = &data->client->dev;
> +
> + if (on) {
> + ret = pm_runtime_get_sync(dev);
> + if (ret < 0)
> + pm_runtime_put_noidle(dev);
> + } else {
> + pm_runtime_mark_last_busy(dev);
> + ret = pm_runtime_put_autosuspend(dev);
> + }
> +
> + return ret;
> +}
> +
> +/*
> + * Device IT INT Time (ms) Scale (lux/step)
> + * 000 50 0.064
> + * 001 100 0.032
> + * 010 200 0.016
> + * 100 400 0.008
> + * 101 - 111 800 0.004
> + * Values are proportional, so ALS INT is selected for input due to
> + * simplicity reason. Integration time value and scaling is
> + * calculated based on device INT value
> + *
> + * Raw value needs to be scaled using ALS steps
> + */
> +static int vcnl4035_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val,
> + int *val2, long mask)
> +{
> + struct vcnl4035_data *data = iio_priv(indio_dev);
> + int ret;
> + int raw_data;
> + unsigned int reg;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + ret = vcnl4035_set_pm_runtime_state(data, true);
> + if (ret < 0)
> + return ret;
> +
> + ret = iio_device_claim_direct_mode(indio_dev);
> + if (!ret) {
> + if (chan->channel)
> + reg = VCNL4035_ALS_DATA;
> + else
> + reg = VCNL4035_WHITE_DATA;
> + ret = regmap_read(data->regmap, reg, &raw_data);
> + iio_device_release_direct_mode(indio_dev);
> + if (!ret) {
> + *val = raw_data;
> + ret = IIO_VAL_INT;
> + }
> + }
> + vcnl4035_set_pm_runtime_state(data, false);
> + return ret;
> + case IIO_CHAN_INFO_INT_TIME:
> + *val = 50;
> + if (data->als_it_val)
> + *val = data->als_it_val * 100;
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + *val = 64;
> + if (!data->als_it_val)
> + *val2 = 1000;
> + else
> + *val2 = data->als_it_val * 2 * 1000;
> + return IIO_VAL_FRACTIONAL;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int vcnl4035_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + int ret;
> + struct vcnl4035_data *data = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_INT_TIME:
Should we check that val2 is 0?
> + if (val <= 0 || val > 800)
> + return -EINVAL;
> +
> + ret = vcnl4035_set_pm_runtime_state(data, true);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
> + VCNL4035_ALS_IT_MASK,
> + val / 100);
> + if (!ret)
> + data->als_it_val = val / 100;
> +
> + vcnl4035_set_pm_runtime_state(data, false);
> + return ret;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +/* No direct ABI for persistence and threshold, so eventing */
> +static int vcnl4035_read_thresh(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan, enum iio_event_type type,
> + enum iio_event_direction dir, enum iio_event_info info,
> + int *val, int *val2)
> +{
> + struct vcnl4035_data *data = iio_priv(indio_dev);
> +
> + switch (info) {
> + case IIO_EV_INFO_VALUE:
> + switch (dir) {
> + case IIO_EV_DIR_RISING:
> + *val = data->als_thresh_high;
> + return IIO_VAL_INT;
> + case IIO_EV_DIR_FALLING:
> + *val = data->als_thresh_low;
> + return IIO_VAL_INT;
> + default:
> + return -EINVAL;
> + }
> + break;
> + case IIO_EV_INFO_PERIOD:
> + *val = data->als_persistence;
> + return IIO_VAL_INT;
> + default:
> + return -EINVAL;
> + }
> +
> +}
> +
> +static int vcnl4035_write_thresh(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan, enum iio_event_type type,
> + enum iio_event_direction dir, enum iio_event_info info, int val,
> + int val2)
> +{
> + struct vcnl4035_data *data = iio_priv(indio_dev);
> + int ret;
> +
Should we check that val2 is 0?
> + switch (info) {
> + case IIO_EV_INFO_VALUE:
> + /* 16 bit threshold range 0 - 65535 */
> + if (val < 0 || val > 65535)
> + return -EINVAL;
> + if (dir == IIO_EV_DIR_RISING) {
> + if (val < data->als_thresh_low)
> + return -EINVAL;
> + ret = regmap_write(data->regmap, VCNL4035_ALS_THDH,
> + val);
> + if (!ret)
> + data->als_thresh_high = val;
> + } else {
> + if (val > data->als_thresh_high)
> + return -EINVAL;
> + ret = regmap_write(data->regmap, VCNL4035_ALS_THDL,
> + val);
> + if (!ret)
> + data->als_thresh_low = val;
> + }
> + return ret;
> + case IIO_EV_INFO_PERIOD:
> + /* allow only 1 2 4 8 as persistence value */
> + if (val < 0 || val > 8 || __sw_hweight8(val) != 1)
> + return -EINVAL;
> + ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
> + VCNL4035_ALS_PERS_MASK, val);
> + if (!ret)
> + data->als_persistence = val;
> + return ret;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static IIO_CONST_ATTR_INT_TIME_AVAIL("50 100 200 400 800");
> +
> +static struct attribute *vcnl4035_attributes[] = {
> + &iio_const_attr_integration_time_available.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group vcnl4035_attribute_group = {
> + .attrs = vcnl4035_attributes,
> +};
> +
> +static const struct iio_info vcnl4035_info = {
> + .read_raw = vcnl4035_read_raw,
> + .write_raw = vcnl4035_write_raw,
> + .read_event_value = vcnl4035_read_thresh,
> + .write_event_value = vcnl4035_write_thresh,
> + .attrs = &vcnl4035_attribute_group,
> +};
> +
> +static const struct iio_event_spec vcnl4035_event_spec[] = {
> + {
> + .type = IIO_EV_TYPE_THRESH,
> + .dir = IIO_EV_DIR_RISING,
> + .mask_separate = BIT(IIO_EV_INFO_VALUE),
> + }, {
> + .type = IIO_EV_TYPE_THRESH,
> + .dir = IIO_EV_DIR_FALLING,
> + .mask_separate = BIT(IIO_EV_INFO_VALUE),
> + }, {
> + .type = IIO_EV_TYPE_THRESH,
> + .dir = IIO_EV_DIR_EITHER,
> + .mask_separate = BIT(IIO_EV_INFO_PERIOD),
> + },
> +};
> +
> +enum vcnl4035_scan_index_order {
> + VCNL4035_CHAN_INDEX_LIGHT,
> + VCNL4035_CHAN_INDEX_WHITE_LED,
> +};
> +
> +static const unsigned long vcnl4035_available_scan_masks[] = {
> + BIT(VCNL4035_CHAN_INDEX_LIGHT),
> + BIT(VCNL4035_CHAN_INDEX_WHITE_LED),
> + 0
> +};
> +
> +static const struct iio_chan_spec vcnl4035_channels[] = {
> + {
> + .type = IIO_LIGHT,
> + .channel = 0,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> + BIT(IIO_CHAN_INFO_INT_TIME) |
> + BIT(IIO_CHAN_INFO_SCALE),
> + .event_spec = vcnl4035_event_spec,
> + .num_event_specs = ARRAY_SIZE(vcnl4035_event_spec),
> + .scan_index = VCNL4035_CHAN_INDEX_LIGHT,
> + .scan_type = {
> + .sign = 'u',
> + .realbits = 16,
> + .storagebits = 16,
> + .endianness = IIO_LE,
> + },
> + },
> + {
> + .type = IIO_LIGHT,
> + .channel = 1,
> + .modified = 1,
> + .channel2 = IIO_MOD_LIGHT_BOTH,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .scan_index = VCNL4035_CHAN_INDEX_WHITE_LED,
> + .scan_type = {
> + .sign = 'u',
> + .realbits = 16,
> + .storagebits = 16,
> + .endianness = IIO_LE,
> + },
> + },
> +};
> +
> +static int vcnl4035_set_als_power_state(struct vcnl4035_data *data, u8 status)
> +{
> + return regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
> + VCNL4035_MODE_ALS_MASK,
> + status);
> +}
> +
> +static int vcnl4035_init(struct vcnl4035_data *data)
> +{
> + int ret;
> + int id;
> +
> + ret = regmap_read(data->regmap, VCNL4035_DEV_ID, &id);
> + if (ret < 0) {
> + dev_err(&data->client->dev, "Failed to read DEV_ID register\n");
> + return ret;
> + }
> +
> + if (id != VCNL4035_DEV_ID_VAL) {
> + dev_err(&data->client->dev, "Wrong id, got %x, expected %x\n",
> + id, VCNL4035_DEV_ID_VAL);
> + return -ENODEV;
> + }
> +
> + ret = vcnl4035_set_als_power_state(data, VCNL4035_MODE_ALS_ENABLE);
> + if (ret < 0)
> + return ret;
> +
> + /* ALS white channel enable */
> + ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
> + VCNL4035_MODE_ALS_WHITE_CHAN,
> + 1);
> + if (ret) {
> + dev_err(&data->client->dev, "set white channel enable %d\n",
> + ret);
> + return ret;
> + }
> +
> + /* set default integration time - 100 ms for ALS */
> + ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
> + VCNL4035_ALS_IT_MASK,
> + VCNL4035_ALS_IT_DEFAULT);
> + if (ret) {
> + dev_err(&data->client->dev, "set default ALS IT returned %d\n",
> + ret);
> + return ret;
> + }
> + data->als_it_val = VCNL4035_ALS_IT_DEFAULT;
> +
> + /* set default persistence time - 1 for ALS */
> + ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
> + VCNL4035_ALS_PERS_MASK,
> + VCNL4035_ALS_PERS_DEFAULT);
> + if (ret) {
> + dev_err(&data->client->dev, "set default PERS returned %d\n",
> + ret);
> + return ret;
> + }
> + data->als_persistence = VCNL4035_ALS_PERS_DEFAULT;
> +
> + /* set default HIGH threshold for ALS */
> + ret = regmap_write(data->regmap, VCNL4035_ALS_THDH,
> + VCNL4035_ALS_THDH_DEFAULT);
> + if (ret) {
> + dev_err(&data->client->dev, "set default THDH returned %d\n",
> + ret);
> + return ret;
> + }
> + data->als_thresh_high = VCNL4035_ALS_THDH_DEFAULT;
> +
> + /* set default LOW threshold for ALS */
> + ret = regmap_write(data->regmap, VCNL4035_ALS_THDL,
> + VCNL4035_ALS_THDL_DEFAULT);
> + if (ret) {
> + dev_err(&data->client->dev, "set default THDL returned %d\n",
> + ret);
> + return ret;
> + }
> + data->als_thresh_low = VCNL4035_ALS_THDL_DEFAULT;
> +
> + return 0;
> +}
> +
> +static bool vcnl4035_is_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case VCNL4035_ALS_CONF:
> + case VCNL4035_DEV_ID:
> + return false;
> + default:
> + return true;
> + }
> +}
> +
> +static const struct regmap_config vcnl4035_regmap_config = {
> + .name = VCNL4035_REGMAP_NAME,
> + .reg_bits = 8,
> + .val_bits = 16,
> + .max_register = VCNL4035_DEV_ID,
> + .cache_type = REGCACHE_RBTREE,
> + .volatile_reg = vcnl4035_is_volatile_reg,
> + .val_format_endian = REGMAP_ENDIAN_LITTLE,
> +};
> +
> +static int vcnl4035_probe_trigger(struct iio_dev *indio_dev)
> +{
> + int ret;
> + struct vcnl4035_data *data = iio_priv(indio_dev);
> +
> + data->drdy_trigger0 = devm_iio_trigger_alloc(
> + indio_dev->dev.parent,
> + "%s-dev%d", indio_dev->name, indio_dev->id);
> + if (!data->drdy_trigger0)
> + return -ENOMEM;
> +
> + data->drdy_trigger0->dev.parent = indio_dev->dev.parent;
> + data->drdy_trigger0->ops = &vcnl4035_trigger_ops;
> + iio_trigger_set_drvdata(data->drdy_trigger0, indio_dev);
> + ret = devm_iio_trigger_register(indio_dev->dev.parent,
> + data->drdy_trigger0);
> + if (ret) {
> + dev_err(&data->client->dev, "iio trigger register failed\n");
> + return ret;
> + }
> +
> + /* Trigger setup */
> + ret = devm_iio_triggered_buffer_setup(indio_dev->dev.parent, indio_dev,
> + NULL, vcnl4035_trigger_consumer_handler,
> + NULL);
> + if (ret < 0) {
> + dev_err(&data->client->dev, "iio triggered buffer setup failed\n");
> + return ret;
> + }
> +
> + /* IRQ to trigger mapping */
> + ret = devm_request_threaded_irq(&data->client->dev, data->client->irq,
> + NULL, vcnl4035_drdy_irq_thread,
> + IRQF_TRIGGER_LOW | IRQF_ONESHOT,
> + VCNL4035_IRQ_NAME, indio_dev);
> + if (ret < 0) {
> + dev_err(&data->client->dev, "request irq %d for trigger0 failed\n",
> + data->client->irq);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int vcnl4035_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct vcnl4035_data *data;
> + struct iio_dev *indio_dev;
> + struct regmap *regmap;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + regmap = devm_regmap_init_i2c(client, &vcnl4035_regmap_config);
> + if (IS_ERR(regmap)) {
> + dev_err(&client->dev, "regmap_init failed!\n");
> + return PTR_ERR(regmap);
> + }
> +
> + data = iio_priv(indio_dev);
> + i2c_set_clientdata(client, indio_dev);
> + data->client = client;
> + data->regmap = regmap;
> +
> + indio_dev->dev.parent = &client->dev;
> + indio_dev->info = &vcnl4035_info;
> + indio_dev->name = VCNL4035_DRV_NAME;
> + indio_dev->channels = vcnl4035_channels;
> + indio_dev->num_channels = ARRAY_SIZE(vcnl4035_channels);
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + ret = vcnl4035_init(data);
> + if (ret < 0) {
> + dev_err(&client->dev, "vcnl4035 chip init failed\n");
> + return ret;
> + }
> +
> + if (client->irq > 0) {
> + ret = vcnl4035_probe_trigger(indio_dev);
> + if (ret < 0) {
> + dev_err(&client->dev, "vcnl4035 unable init trigger\n");
> + goto fail_poweroff;
> + }
> + }
> +
> + ret = iio_device_register(indio_dev);
> + if (ret)
> + goto fail_poweroff;
> +
> + ret = pm_runtime_set_active(&client->dev);
> + if (ret < 0)
> + goto fail_unregister;
> +
> + pm_runtime_enable(&client->dev);
> + pm_runtime_set_autosuspend_delay(&client->dev, VCNL4035_SLEEP_DELAY_MS);
> + pm_runtime_use_autosuspend(&client->dev);
> +
> + return 0;
> +
> +fail_unregister:
> + iio_device_unregister(indio_dev);
> +fail_poweroff:
> + vcnl4035_set_als_power_state(data, VCNL4035_MODE_ALS_DISABLE);
> + return ret;
> +}
> +
> +static int vcnl4035_remove(struct i2c_client *client)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +
> + iio_device_unregister(indio_dev);
> +
> + pm_runtime_dont_use_autosuspend(&client->dev);
> + pm_runtime_disable(&client->dev);
> + pm_runtime_set_suspended(&client->dev);
> + pm_runtime_put_noidle(&client->dev);
> +
> + return vcnl4035_set_als_power_state(iio_priv(indio_dev),
> + VCNL4035_MODE_ALS_DISABLE);
> +}
> +
> +#ifdef CONFIG_PM
> +static int __maybe_unused vcnl4035_runtime_suspend(struct device *dev)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct vcnl4035_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + ret = vcnl4035_set_als_power_state(data, VCNL4035_MODE_ALS_DISABLE);
> + regcache_mark_dirty(data->regmap);
> +
> + return ret;
> +}
> +
> +static int __maybe_unused vcnl4035_runtime_resume(struct device *dev)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct vcnl4035_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + regcache_sync(data->regmap);
> + ret = vcnl4035_set_als_power_state(data, VCNL4035_MODE_ALS_ENABLE);
> + if (ret < 0)
> + return ret;
> +
> + /* wait for 1 ALS integration cycle */
> + msleep(data->als_it_val * 100);
> +
> + return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops vcnl4035_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> + pm_runtime_force_resume)
> + SET_RUNTIME_PM_OPS(vcnl4035_runtime_suspend,
> + vcnl4035_runtime_resume, NULL)
> +};
> +
> +static const struct of_device_id vcnl4035_of_match[] = {
> + { .compatible = "vishay,vcnl4035", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, vcnl4035_of_match);
> +
> +static struct i2c_driver vcnl4035_driver = {
> + .driver = {
> + .name = VCNL4035_DRV_NAME,
> + .pm = &vcnl4035_pm_ops,
> + .of_match_table = of_match_ptr(vcnl4035_of_match),
Please correct me if I'm wrong here.
Use of_match_ptr() and not provide an ACPI match table will not make
this driver work on ACPI systems.
The reason is that the ACPI match function will fall back on
of_match_table if no acpi_match_table is provided, and the
of_match_ptr() macro will simple evaluate to NULL if not CONFIG_OF
is set.
In other words, I think we should change this to just
.of_match_table = &vcnl4035_of_match,
> + },
> + .probe = vcnl4035_probe,
> + .remove = vcnl4035_remove,
> +};
> +
> +module_i2c_driver(vcnl4035_driver);
> +
> +MODULE_AUTHOR("Parthiban Nallathambi <pn@xxxxxxx>");
> +MODULE_DESCRIPTION("VCNL4035 Ambient Light Sensor driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.14.4
>
Best regards
Marcus Folkesson
Attachment:
signature.asc
Description: PGP signature