[PATCH 11/14] USB: EHCI: ehci-mv: add DT support
From: Lubomir Rintel
Date: Wed Aug 22 2018 - 16:43:53 EST
Add Device tree support.
Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
drivers/usb/host/ehci-mv.c | 41 +++++++++++++++++++++-----------------
1 file changed, 23 insertions(+), 18 deletions(-)
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 43b300c90875..f26109eafdbf 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -34,11 +34,11 @@ struct ehci_hcd_mv {
void __iomem *op_regs;
struct usb_phy *otg;
+ struct clk *clk;
- struct mv_usb_platform_data *pdata;
struct phy *phy;
- struct clk *clk;
+ int (*set_vbus)(unsigned int vbus);
};
static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
@@ -100,11 +100,6 @@ static int mv_ehci_probe(struct platform_device *pdev)
int retval = -ENODEV;
u32 offset;
- if (!pdata) {
- dev_err(&pdev->dev, "missing platform_data\n");
- return -ENODEV;
- }
-
if (usb_disabled())
return -ENODEV;
@@ -114,7 +109,12 @@ static int mv_ehci_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, hcd);
ehci_mv = hcd_to_ehci_hcd_mv(hcd);
- ehci_mv->pdata = pdata;
+
+ ehci_mv->mode = MV_USB_MODE_HOST;
+ if (pdata) {
+ ehci_mv->mode = pdata->mode;
+ ehci_mv->set_vbus = pdata->set_vbus;
+ }
ehci_mv->phy = devm_phy_get(&pdev->dev, "usb");
if (IS_ERR(ehci_mv->phy)) {
@@ -166,7 +166,6 @@ static int mv_ehci_probe(struct platform_device *pdev)
ehci = hcd_to_ehci(hcd);
ehci->caps = (struct ehci_caps *) ehci_mv->cap_regs;
- ehci_mv->mode = pdata->mode;
if (ehci_mv->mode == MV_USB_MODE_OTG) {
ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
if (IS_ERR(ehci_mv->otg)) {
@@ -191,8 +190,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
/* otg will enable clock before use as host */
mv_ehci_disable(ehci_mv);
} else {
- if (pdata->set_vbus)
- pdata->set_vbus(1);
+ if (ehci_mv->set_vbus)
+ ehci_mv->set_vbus(1);
retval = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
if (retval) {
@@ -211,8 +210,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
return 0;
err_set_vbus:
- if (pdata->set_vbus)
- pdata->set_vbus(0);
+ if (ehci_mv->set_vbus)
+ ehci_mv->set_vbus(0);
err_disable_clk:
mv_ehci_disable(ehci_mv);
err_put_hcd:
@@ -233,8 +232,8 @@ static int mv_ehci_remove(struct platform_device *pdev)
otg_set_host(ehci_mv->otg->otg, NULL);
if (ehci_mv->mode == MV_USB_MODE_HOST) {
- if (ehci_mv->pdata->set_vbus)
- ehci_mv->pdata->set_vbus(0);
+ if (ehci_mv->set_vbus)
+ ehci_mv->set_vbus(0);
mv_ehci_disable(ehci_mv);
}
@@ -265,14 +264,20 @@ static void mv_ehci_shutdown(struct platform_device *pdev)
hcd->driver->shutdown(hcd);
}
+static const struct of_device_id ehci_mv_dt_ids[] = {
+ { .compatible = "marvell,pxau2o-ehci", },
+ {},
+};
+
static struct platform_driver ehci_mv_driver = {
.probe = mv_ehci_probe,
.remove = mv_ehci_remove,
.shutdown = mv_ehci_shutdown,
.driver = {
- .name = "mv-ehci",
- .bus = &platform_bus_type,
- },
+ .name = "mv-ehci",
+ .bus = &platform_bus_type,
+ .of_match_table = ehci_mv_dt_ids,
+ },
.id_table = ehci_id_table,
};
--
2.17.1