Re: [PATCH v2 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
From: Evan Green
Date: Thu Aug 23 2018 - 19:04:48 EST
On Fri, Aug 17, 2018 at 5:08 PM Venkata Narendra Kumar Gutta
<vnkgutta@xxxxxxxxxxxxxx> wrote:
>
> From: Channagoud Kadabi <ckadabi@xxxxxxxxxxxxxx>
>
> Add error reporting driver for Single Bit Errors (SBEs) and Double Bit
> Errors (DBEs). As of now, this driver supports erp for Last Level Cache
> Controller (LLCC). This driver takes care of dumping registers and adding
> config options to enable and disable panic when the errors happen in cache.
>
> Signed-off-by: Channagoud Kadabi <ckadabi@xxxxxxxxxxxxxx>
> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
> Co-developed-by: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
> ---
> MAINTAINERS | 8 +
> drivers/edac/Kconfig | 28 +++
> drivers/edac/Makefile | 1 +
> drivers/edac/qcom_edac.c | 446 +++++++++++++++++++++++++++++++++++++
> include/linux/soc/qcom/llcc-qcom.h | 25 +++
> 5 files changed, 508 insertions(+)
> create mode 100644 drivers/edac/qcom_edac.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0a23427..0bff713 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5227,6 +5227,14 @@ L: linux-edac@xxxxxxxxxxxxxxx
> S: Maintained
> F: drivers/edac/ti_edac.c
>
> +EDAC-QUALCOMM
> +M: Channagoud Kadabi <ckadabi@xxxxxxxxxxxxxx>
> +M: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
> +L: linux-arm-msm@xxxxxxxxxxxxxxx
> +L: linux-edac@xxxxxxxxxxxxxxx
> +S: Maintained
> +F: drivers/edac/qcom_edac.c
> +
> EDIROL UA-101/UA-1000 DRIVER
> M: Clemens Ladisch <clemens@xxxxxxxxxx>
> L: alsa-devel@xxxxxxxxxxxxxxxx (moderated for non-subscribers)
> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> index 57304b2..da8f150 100644
> --- a/drivers/edac/Kconfig
> +++ b/drivers/edac/Kconfig
> @@ -460,4 +460,32 @@ config EDAC_TI
> Support for error detection and correction on the
> TI SoCs.
>
> +config EDAC_QCOM
> + tristate "QCOM EDAC Controller"
> + depends on EDAC
> + help
> + Support for error detection and correction on the
> + QCOM SoCs.
> +
> +config EDAC_QCOM_LLCC
> + tristate "QCOM EDAC Controller for LLCC Cache"
> + depends on EDAC_QCOM && QCOM_LLCC
> + help
> + Support for error detection and correction on the
> + QCOM LLCC cache. Report errors caught by LLCC ECC
> + mechanism.
> +
> + For debugging issues having to do with stability and overall system
> + health, you should probably say 'Y' here.
> +
> +config EDAC_QCOM_LLCC_PANIC_ON_UE
> + bool "Panic on uncorrectable errors - qcom llcc"
> + depends on EDAC_QCOM_LLCC
> + help
> + Forcibly cause a kernel panic if an uncorrectable error (UE) is
> + detected. This can reduce debugging times on hardware which may be
> + operating at voltages or frequencies outside normal specification.
> +
> + For production builds, you should probably say 'N' here.
> +
> endif # EDAC
> diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
> index 02b43a7..716096d 100644
> --- a/drivers/edac/Makefile
> +++ b/drivers/edac/Makefile
> @@ -77,3 +77,4 @@ obj-$(CONFIG_EDAC_ALTERA) += altera_edac.o
> obj-$(CONFIG_EDAC_SYNOPSYS) += synopsys_edac.o
> obj-$(CONFIG_EDAC_XGENE) += xgene_edac.o
> obj-$(CONFIG_EDAC_TI) += ti_edac.o
> +obj-$(CONFIG_EDAC_QCOM) += qcom_edac.o
> diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c
> new file mode 100644
> index 0000000..9a8c670
> --- /dev/null
> +++ b/drivers/edac/qcom_edac.c
> @@ -0,0 +1,446 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/edac.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/smp.h>
> +#include <linux/soc/qcom/llcc-qcom.h>
> +
> +#include "edac_mc.h"
> +#include "edac_device.h"
> +
> +#ifdef CONFIG_EDAC_QCOM_LLCC_PANIC_ON_UE
> +#define LLCC_ERP_PANIC_ON_UE 1
> +#else
> +#define LLCC_ERP_PANIC_ON_UE 0
> +#endif
> +
> +#define EDAC_LLCC "qcom_llcc"
> +
> +#define TRP_SYN_REG_CNT 6
> +
> +#define DRP_SYN_REG_CNT 8
> +
> +#define LLCC_COMMON_STATUS0 0x0003000C
> +#define LLCC_LB_CNT_MASK GENMASK(31, 28)
> +#define LLCC_LB_CNT_SHIFT 28
> +
> +/* single & Double Bit syndrome register offsets */
Strange capitalization going on here.
> +#define TRP_ECC_SB_ERR_SYN0 0x0002304C
> +#define TRP_ECC_DB_ERR_SYN0 0x00020370
> +#define DRP_ECC_SB_ERR_SYN0 0x0004204C
> +#define DRP_ECC_DB_ERR_SYN0 0x00042070
I think the convention is to use lowercase hex everywhere.
> +
> +/* Error register offsets */
> +#define TRP_ECC_ERROR_STATUS1 0x00020348
> +#define TRP_ECC_ERROR_STATUS0 0x00020344
> +#define DRP_ECC_ERROR_STATUS1 0x00042048
> +#define DRP_ECC_ERROR_STATUS0 0x00042044
> +
> +/* TRP, DRP interrupt register offsets */
> +#define DRP_INTERRUPT_STATUS 0x00041000
> +#define TRP_INTERRUPT_0_STATUS 0x00020480
> +#define DRP_INTERRUPT_CLEAR 0x00041008
> +#define DRP_ECC_ERROR_CNTR_CLEAR 0x00040004
> +#define TRP_INTERRUPT_0_CLEAR 0x00020484
> +#define TRP_ECC_ERROR_CNTR_CLEAR 0x00020440
> +
> +/* Mask and shift macros */
> +#define ECC_DB_ERR_COUNT_MASK GENMASK(4, 0)
> +#define ECC_DB_ERR_WAYS_MASK GENMASK(31, 16)
> +#define ECC_DB_ERR_WAYS_SHIFT BIT(4)
> +
> +#define ECC_SB_ERR_COUNT_MASK GENMASK(23, 16)
> +#define ECC_SB_ERR_COUNT_SHIFT BIT(4)
> +#define ECC_SB_ERR_WAYS_MASK GENMASK(15, 0)
> +
> +#define SB_ECC_ERROR BIT(0)
> +#define DB_ECC_ERROR BIT(1)
> +
> +#define DRP_TRP_INT_CLEAR GENMASK(1, 0)
> +#define DRP_TRP_CNT_CLEAR GENMASK(1, 0)
> +
> +/* Config registers offsets*/
> +#define DRP_ECC_ERROR_CFG 0x00040000
> +
> +/* TRP, DRP interrupt register offsets */
> +#define CMN_INTERRUPT_0_ENABLE 0x0003001C
> +#define CMN_INTERRUPT_2_ENABLE 0x0003003C
> +#define TRP_INTERRUPT_0_ENABLE 0x00020488
> +#define DRP_INTERRUPT_ENABLE 0x0004100C
> +
> +#define SB_ERROR_THRESHOLD 0x1
> +#define SB_ERROR_THRESHOLD_SHIFT 24
> +#define SB_DB_TRP_INTERRUPT_ENABLE 0x3
> +#define TRP0_INTERRUPT_ENABLE 0x1
> +#define DRP0_INTERRUPT_ENABLE BIT(6)
> +#define SB_DB_DRP_INTERRUPT_ENABLE 0x3
> +
> +enum {
> + LLCC_DRAM_CE = 0,
> + LLCC_DRAM_UE,
> + LLCC_TRAM_CE,
> + LLCC_TRAM_UE,
> + LLCC_ERR_TYPE_MAX = LLCC_TRAM_UE + 1,
This is a nit, or perhaps personal preference, but I prefer to not
have initializers for sentinel values, since it's one more thing
someone could forget to update when adding new values.
> +};
> +
> +static int qcom_llcc_core_setup(struct regmap *llcc_bcast_regmap)
> +{
> + u32 sb_err_threshold;
> + int ret;
> +
> + /* Enable TRP in instance 2 of common interrupt enable register */
Can we get a comment explaining what's so special about instance 2?
Instances 1 and 3 get no love?
> + ret = regmap_update_bits(llcc_bcast_regmap, CMN_INTERRUPT_2_ENABLE,
> + TRP0_INTERRUPT_ENABLE,
> + TRP0_INTERRUPT_ENABLE);
> + if (ret)
> + return ret;
> +
> + /* Enable ECC interrupts on Tag Ram */
> + ret = regmap_update_bits(llcc_bcast_regmap, TRP_INTERRUPT_0_ENABLE,
> + SB_DB_TRP_INTERRUPT_ENABLE,
> + SB_DB_TRP_INTERRUPT_ENABLE);
> + if (ret)
> + return ret;
> +
> + /* Enable SB error for Data RAM */
> + sb_err_threshold = (SB_ERROR_THRESHOLD << SB_ERROR_THRESHOLD_SHIFT);
> + ret = regmap_write(llcc_bcast_regmap, DRP_ECC_ERROR_CFG,
> + sb_err_threshold);
> + if (ret)
> + return ret;
> +
> + /* Enable DRP in instance 2 of common interrupt enable register */
> + ret = regmap_update_bits(llcc_bcast_regmap, CMN_INTERRUPT_2_ENABLE,
> + DRP0_INTERRUPT_ENABLE,
> + DRP0_INTERRUPT_ENABLE);
> + if (ret)
> + return ret;
> +
> + /* Enable ECC interrupts on Data Ram */
> + ret = regmap_write(llcc_bcast_regmap, DRP_INTERRUPT_ENABLE,
> + SB_DB_DRP_INTERRUPT_ENABLE);
> + return ret;
> +}
> +
> +/* Clear the error interrupt and counter registers */
> +static int
> +qcom_llcc_clear_errors_status(int err_type, struct llcc_drv_data *drv)
Another nit: errors_status is kind of weird. Maybe
qcom_llcc_clear_errors or qcom_llcc_clear_error_status?
> +{
> + int ret = 0;
> +
> + switch (err_type) {
> + case LLCC_DRAM_CE:
> + case LLCC_DRAM_UE:
> + /* Clear the interrupt */
> + ret = regmap_write(drv->bcast_regmap, DRP_INTERRUPT_CLEAR,
> + DRP_TRP_INT_CLEAR);
> + if (ret)
> + return ret;
> +
> + /* Clear the counters */
> + ret = regmap_write(drv->bcast_regmap, DRP_ECC_ERROR_CNTR_CLEAR,
> + DRP_TRP_CNT_CLEAR);
> + if (ret)
> + return ret;
> + break;
> + case LLCC_TRAM_CE:
> + case LLCC_TRAM_UE:
> + ret = regmap_write(drv->bcast_regmap, TRP_INTERRUPT_0_CLEAR,
> + DRP_TRP_INT_CLEAR);
> + if (ret)
> + return ret;
> +
> + ret = regmap_write(drv->bcast_regmap, TRP_ECC_ERROR_CNTR_CLEAR,
> + DRP_TRP_CNT_CLEAR);
> + if (ret)
> + return ret;
> + break;
A default case that errors or complains or both would be nice.
> + }
> + return ret;
> +}
> +
> +/* Dump Syndrome registers data for Tag RAM, Data RAM bit errors*/
> +static int
> +dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type)
> +{
> + struct llcc_edac_reg_data *reg_data = &(drv->edac_reg[err_type]);
> + int err_cnt, err_ways, ret, i;
> + u32 synd_reg, synd_val;
> +
> + for (i = 0; i < reg_data->reg_cnt; i++) {
> + synd_reg = reg_data->synd_reg + (i * 4);
> + ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg,
> + &synd_val);
> + if (ret)
> + goto clear;
> + edac_printk(KERN_CRIT, EDAC_LLCC, "%s: ECC_SYN%d: 0x%8x\n",
> + reg_data->err_name, i, synd_val);
> + }
> +
> + ret = regmap_read(drv->regmap,
> + drv->offsets[bank] + reg_data->err_status_reg,
> + &err_cnt);
> + if (ret)
> + goto clear;
> +
> + err_cnt &= reg_data->err_count_mask;
> + err_cnt >>= reg_data->err_count_shift;
> + edac_printk(KERN_CRIT, EDAC_LLCC, "%s: error count: 0x%4x\n",
> + reg_data->err_name, err_cnt);
> +
> + ret = regmap_read(drv->regmap,
> + drv->offsets[bank] + reg_data->err_ways_status,
> + &err_ways);
> + if (ret)
> + goto clear;
> +
> + err_ways &= reg_data->err_ways_mask;
> + err_ways >>= reg_data->err_ways_shift;
> +
> + edac_printk(KERN_CRIT, EDAC_LLCC, "%s: error ways: 0x%4x\n",
> + reg_data->err_name, err_ways);
> +
> +clear:
> + ret = qcom_llcc_clear_errors_status(err_type, drv);
> + return ret;
> +}
Nice job consolidating those 4 functions down into one.
> +
> +static int
> +dump_syn_reg(struct edac_device_ctl_info *edev_ctl, int err_type, u32 bank)
> +{
> + struct llcc_drv_data *drv = edev_ctl->pvt_info;
> + int ret = 0;
> +
> + ret = dump_syn_reg_values(drv, bank, err_type);
> + if (ret)
> + return ret;
> +
> + switch (err_type) {
> + case LLCC_DRAM_CE:
> + edac_device_handle_ce(edev_ctl, 0, bank,
> + "LLCC Data RAM correctable Error");
> + break;
> + case LLCC_DRAM_UE:
> + edac_device_handle_ue(edev_ctl, 0, bank,
> + "LLCC Data RAM uncorrectable Error");
> + break;
> + case LLCC_TRAM_CE:
> + edac_device_handle_ce(edev_ctl, 0, bank,
> + "LLCC Tag RAM correctable Error");
> + break;
> + case LLCC_TRAM_UE:
> + edac_device_handle_ue(edev_ctl, 0, bank,
> + "LLCC Tag RAM uncorrectable Error");
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static irqreturn_t
> +llcc_ecc_irq_handler(int irq, void *edev_ctl)
> +{
> + struct edac_device_ctl_info *edac_dev_ctl;
> + irqreturn_t irq_rc = IRQ_NONE;
> + u32 drp_error, trp_error, i;
> + struct llcc_drv_data *drv;
> + int ret;
> +
> + edac_dev_ctl = (struct edac_device_ctl_info *)edev_ctl;
> + drv = edac_dev_ctl->pvt_info;
> +
> + for (i = 0; i < drv->num_banks; i++) {
> + /* Look for Data RAM errors */
> + ret = regmap_read(drv->regmap,
> + drv->offsets[i] + DRP_INTERRUPT_STATUS,
> + &drp_error);
> + if (ret)
> + return irq_rc;
> +
> + if (drp_error & SB_ECC_ERROR) {
> + edac_printk(KERN_CRIT, EDAC_LLCC,
> + "Single Bit Error detected in Data Ram\n");
> + ret = dump_syn_reg(edev_ctl, LLCC_DRAM_CE, i);
> + if (!ret)
> + irq_rc = IRQ_HANDLED;
> + } else if (drp_error & DB_ECC_ERROR) {
> + edac_printk(KERN_CRIT, EDAC_LLCC,
> + "Double Bit Error detected in Data Ram\n");
> + ret = dump_syn_reg(edev_ctl, LLCC_DRAM_UE, i);
> + if (!ret)
> + irq_rc = IRQ_HANDLED;
> + }
> +
> + /* Look for Tag RAM errors */
> + ret = regmap_read(drv->regmap,
> + drv->offsets[i] + TRP_INTERRUPT_0_STATUS,
> + &trp_error);
> + if (ret)
> + return irq_rc;
> +
> + if (trp_error & SB_ECC_ERROR) {
> + edac_printk(KERN_CRIT, EDAC_LLCC,
> + "Single Bit Error detected in Tag Ram\n");
> + ret = dump_syn_reg(edev_ctl, LLCC_TRAM_CE, i);
> + if (!ret)
> + irq_rc = IRQ_HANDLED;
> + } else if (trp_error & DB_ECC_ERROR) {
> + edac_printk(KERN_CRIT, EDAC_LLCC,
> + "Double Bit Error detected in Tag Ram\n");
> + ret = dump_syn_reg(edev_ctl, LLCC_TRAM_UE, i);
> + if (!ret)
> + irq_rc = IRQ_HANDLED;
> + }
> + }
> +
> + return irq_rc;
> +}
> +
> +static void llcc_edac_reg_data_init(struct llcc_edac_reg_data *edac_reg)
> +{
> +
> + struct llcc_edac_reg_data *reg_data;
> +
> + /* Initialize register info for LLCC_DRAM_CE */
> + reg_data = &edac_reg[LLCC_DRAM_CE];
> + reg_data->err_name = "DRAM Single-bit";
> + reg_data->reg_cnt = DRP_SYN_REG_CNT;
> + reg_data->synd_reg = DRP_ECC_SB_ERR_SYN0;
> + reg_data->err_status_reg = DRP_ECC_ERROR_STATUS1;
> + reg_data->err_count_mask = ECC_SB_ERR_COUNT_MASK;
> + reg_data->err_count_shift = ECC_SB_ERR_COUNT_SHIFT;
> + reg_data->err_ways_status = DRP_ECC_ERROR_STATUS0;
> + reg_data->err_ways_mask = ECC_SB_ERR_WAYS_MASK;
> +
> + /* Initialize register info for LLCC_DRAM_UE */
> + reg_data = &edac_reg[LLCC_DRAM_UE];
> + reg_data->err_name = "DRAM Double-bit";
> + reg_data->reg_cnt = DRP_SYN_REG_CNT;
> + reg_data->synd_reg = DRP_ECC_DB_ERR_SYN0;
> + reg_data->err_status_reg = DRP_ECC_ERROR_STATUS1;
> + reg_data->err_count_mask = ECC_DB_ERR_COUNT_MASK;
> + reg_data->err_ways_status = DRP_ECC_ERROR_STATUS0;
> + reg_data->err_ways_mask = ECC_DB_ERR_WAYS_MASK;
> + reg_data->err_ways_shift = ECC_DB_ERR_WAYS_SHIFT;
> +
> + /* Initialize register info for LLCC_TRAM_CE */
> + reg_data = &edac_reg[LLCC_TRAM_CE];
> + reg_data->err_name = "TRAM Single-bit";
> + reg_data->reg_cnt = TRP_SYN_REG_CNT;
> + reg_data->synd_reg = TRP_ECC_SB_ERR_SYN0;
> + reg_data->err_status_reg = TRP_ECC_ERROR_STATUS1;
> + reg_data->err_count_mask = ECC_SB_ERR_COUNT_MASK;
> + reg_data->err_count_shift = ECC_SB_ERR_COUNT_SHIFT;
> + reg_data->err_ways_status = TRP_ECC_ERROR_STATUS0;
> + reg_data->err_ways_mask = ECC_SB_ERR_WAYS_MASK;
> +
> + /* Initialize register info for LLCC_TRAM_UE */
> + reg_data = &edac_reg[LLCC_TRAM_UE];
> + reg_data->err_name = "TRAM Double-bit";
> + reg_data->reg_cnt = TRP_SYN_REG_CNT;
> + reg_data->synd_reg = TRP_ECC_DB_ERR_SYN0;
> + reg_data->err_status_reg = TRP_ECC_ERROR_STATUS1;
> + reg_data->err_count_mask = ECC_DB_ERR_COUNT_MASK;
> + reg_data->err_ways_status = TRP_ECC_ERROR_STATUS0;
> + reg_data->err_ways_mask = ECC_DB_ERR_WAYS_MASK;
> + reg_data->err_ways_shift = ECC_DB_ERR_WAYS_SHIFT;
This should all just be a statically initialized const table, there's
no need to do this in code.
> +}
> +
> +static int qcom_llcc_edac_probe(struct platform_device *pdev)
> +{
> + struct llcc_drv_data *llcc_driv_data = pdev->dev.platform_data;
> + struct edac_device_ctl_info *edev_ctl;
> + struct device *dev = &pdev->dev;
> + int ecc_irq;
> + int rc;
> +
> + /* Initialize register set for the error types*/
> + llcc_driv_data->edac_reg = devm_kcalloc(dev, LLCC_ERR_TYPE_MAX,
> + sizeof(struct llcc_edac_reg_data),
> + GFP_KERNEL);
> + llcc_edac_reg_data_init(llcc_driv_data->edac_reg);
> +
> + rc = qcom_llcc_core_setup(llcc_driv_data->bcast_regmap);
> + if (rc)
> + return rc;
> +
> + /* Allocate edac control info */
> + edev_ctl = edac_device_alloc_ctl_info(0, "qcom-llcc", 1, "bank",
> + llcc_driv_data->num_banks, 1,
> + NULL, 0,
> + edac_device_alloc_index());
> +
> + if (!edev_ctl)
> + return -ENOMEM;
> +
> + edev_ctl->dev = dev;
> + edev_ctl->mod_name = dev_name(dev);
> + edev_ctl->dev_name = dev_name(dev);
> + edev_ctl->ctl_name = "llcc";
> + edev_ctl->panic_on_ue = LLCC_ERP_PANIC_ON_UE;
> + edev_ctl->pvt_info = llcc_driv_data;
> +
> + rc = edac_device_add_device(edev_ctl);
> + if (rc)
> + goto out_mem;
> +
> + platform_set_drvdata(pdev, edev_ctl);
> +
> + /* Request for ecc irq */
> + ecc_irq = llcc_driv_data->ecc_irq;
> + if (ecc_irq < 0) {
> + rc = -ENODEV;
> + goto out_dev;
> + }
> + rc = devm_request_irq(dev, ecc_irq, llcc_ecc_irq_handler,
> + IRQF_TRIGGER_HIGH, "llcc_ecc", edev_ctl);
> + if (rc)
> + goto out_dev;
> +
> + return rc;
> +
> +out_dev:
> + edac_device_del_device(edev_ctl->dev);
> +out_mem:
> + edac_device_free_ctl_info(edev_ctl);
> +
> + return rc;
> +}
> +
> +static int qcom_llcc_edac_remove(struct platform_device *pdev)
> +{
> + struct edac_device_ctl_info *edev_ctl = dev_get_drvdata(&pdev->dev);
> +
> + edac_device_del_device(edev_ctl->dev);
> + edac_device_free_ctl_info(edev_ctl);
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id qcom_llcc_edac_match_table[] = {
> +#ifdef EDAC_QCOM_LLCC
> + { .compatible = "qcom,llcc-edac" },
> +#endif
> + { },
> +};
> +
> +static struct platform_driver qcom_llcc_edac_driver = {
> + .probe = qcom_llcc_edac_probe,
> + .remove = qcom_llcc_edac_remove,
> + .driver = {
> + .name = "qcom_llcc_edac",
> + .of_match_table = qcom_llcc_edac_match_table,
> + },
> +};
> +module_platform_driver(qcom_llcc_edac_driver);
> +
> +MODULE_DESCRIPTION("QCOM EDAC driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
> index 2e4b34d..25096e0 100644
> --- a/include/linux/soc/qcom/llcc-qcom.h
> +++ b/include/linux/soc/qcom/llcc-qcom.h
> @@ -84,6 +84,7 @@ struct llcc_drv_data {
> struct regmap *regmap;
> struct regmap *bcast_regmap;
> const struct llcc_slice_config *cfg;
> + struct llcc_edac_reg_data *edac_reg;
This needs a comment description.
> struct mutex lock;
> u32 cfg_size;
> u32 max_slices;
> @@ -93,6 +94,30 @@ struct llcc_drv_data {
> int ecc_irq;
> };
>
> +/**
> + * llcc_edac_reg_data - llcc edac registers data for each error type
> + * @err_name: name of the error
> + * @reg_cnt: number of registers
> + * @synd_reg: syndrome register address
> + * @err_status_reg: Status register address to read the error count
> + * @err_count_mask: Mask value to get the error count
> + * @err_count_shift: Shift value to get the error count
> + * @err_ways_status: Status register address to read error ways
> + * @err_ways_mask: Mask value to get the error ways
> + * @err_ways_shift: Shift value to get the error ways
> + */
> +struct llcc_edac_reg_data {
> + char *err_name;
> + int reg_cnt;
> + int synd_reg;
> + int err_status_reg;
> + int err_count_mask;
> + int err_count_shift;
> + int err_ways_status;
> + int err_ways_mask;
> + int err_ways_shift;
> +};
> +
> #if IS_ENABLED(CONFIG_QCOM_LLCC)
> /**
> * llcc_slice_getd - get llcc slice descriptor
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>