Re: [PATCH v5 2/2] leds: lm3697: Introduce the lm3697 driver

[Dan Murphy]

Jacek

On 08/24/2018 05:05 AM, Pavel Machek wrote:
> Hi!
> 
>> +/**
>> + * struct lm3697 -
>> + * @enable_gpio - Hardware enable gpio
>> + * @regulator - LED supply regulator pointer
>> + * @client - Pointer to the I2C client
>> + * @regmap - Devices register map
>> + * @dev - Pointer to the devices device struct
>> + * @lock - Lock for reading/writing the device
>> + * @leds - Array of LED strings.
>> + */
> 
> extra .
> 
>> +	ret = regmap_write(led->priv->regmap, brt_msb_reg, brt_val);
>> +	if (ret) {
>> +		dev_err(&led->priv->client->dev, "Cannot write MSB\n");
>> +		goto out;
>> +	}
>> +out:
> 
> I'd avoid this goto.
> 
>> +static int lm3697_set_control_bank(struct lm3697 *priv)
>> +{
>> +	u8 control_bank_config = 0;
>> +	struct lm3697_led *led;
>> +	int ret, i;
>> +
>> +	led = &priv->leds[0];
>> +	if (led->control_bank == LM3697_CONTROL_A)
>> +		led = &priv->leds[1];
> 
> I'd expect CONTROL_A to correspond to leds[0]...?
> 
>> +	for (i = 0; i < LM3697_MAX_LED_STRINGS; i++) {
>> +		if (led->hvled_strings[i] == LM3697_HVLED_ASSIGNMENT)
>> +			control_bank_config |= 1 << i;
>> +	}
> 
> Extra {}s.
> 
>> +	priv->regulator = devm_regulator_get(&priv->client->dev, "vled");
>> +	if (IS_ERR(priv->regulator))
>> +		priv->regulator = NULL;
> 
> If vled regulator is specified in dt and _get fails, is it worth a
> warning?
> 
> 									Pavel
> 

Do you want v6 or a new patch on top?

Dan

-- 
------------------
Dan Murphy