Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP

From: kbuild test robot
Date: Sat Aug 25 2018 - 01:22:52 EST


Hi Girish,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on spi/for-next]
[also build test ERROR on v4.18]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url: https://github.com/0day-ci/linux/commits/Dilip-Kota/spi-spi-geni-qcom-Add-SPI-driver-support-for-GENI-based-QUP/20180824-190528
base: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
config: i386-allmodconfig
compiler: gcc-7 (Debian 7.3.0-16) 7.3.0
reproduce:
make ARCH=i386 allmodconfig
make ARCH=i386

All errors (new ones prefixed by >>):


vim +239 drivers/spi/spi-geni-qcom.c

212
213 static int spi_geni_prepare_transfer_hardware(struct spi_master *spi)
214 {
215 struct spi_geni_master *mas = spi_master_get_devdata(spi);
216 struct geni_se *se = &mas->se;
217
218 if (!mas->setup) {
219 unsigned int proto = geni_se_read_proto(se);
220 unsigned int major, minor, step, ver;
221
222 if (proto != GENI_SE_SPI) {
223 dev_err(mas->dev, "Invalid proto %d\n", proto);
224 return -ENXIO;
225 }
226 mas->tx_fifo_depth = geni_se_get_tx_fifo_depth(se);
227 mas->rx_fifo_depth = geni_se_get_rx_fifo_depth(se);
228 mas->tx_fifo_width = geni_se_get_tx_fifo_width(se);
229
230 /*
231 * Hardware programming guide suggests to configure
232 * RX FIFO RFR level to fifo_depth-2.
233 */
234 geni_se_init(se, 0x0, mas->tx_fifo_depth - 2);
235 mas->oversampling = 1;
236 /* Transmit an entire FIFO worth of data per IRQ */
237 mas->tx_wm = 1;
238 ver = geni_se_get_qup_hw_version(se);
> 239 major = GENI_SE_VERSION_MAJOR(ver);
> 240 minor = GENI_SE_VERSION_MINOR(ver);
> 241 step = GENI_SE_VERSION_STEP(ver);
242
243 if (major == 1 && minor == 0)
244 mas->oversampling = 2;
245 mas->setup = 1;
246 }
247 return 0;
248 }
249

---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation