[RESEND 3/5] drm/mxsfb: Add pm_runtime calls to pipe_enable/disable

From: Leonard Crestez
Date: Mon Aug 27 2018 - 07:11:28 EST


Adding lcdif nodes to a power domain currently results in
black/corrupted screens or hangs because power is not correctly enabled
when required.

Ensure power is on when display is active by adding
pm_runtime_get/put_sync to mxsfb_pipe_enable/disable.

Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx>
Reviewed-by: Stefan Agner <stefan@xxxxxxxx>
---
drivers/gpu/drm/mxsfb/mxsfb_drv.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
index ffe5137ccaf8..68d79f5dc0d3 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
@@ -101,23 +101,27 @@ static const struct drm_mode_config_funcs mxsfb_mode_config_funcs = {
static void mxsfb_pipe_enable(struct drm_simple_display_pipe *pipe,
struct drm_crtc_state *crtc_state,
struct drm_plane_state *plane_state)
{
struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
+ struct drm_device *drm = pipe->plane.dev;

+ pm_runtime_get_sync(drm->dev);
drm_panel_prepare(mxsfb->panel);
mxsfb_crtc_enable(mxsfb);
drm_panel_enable(mxsfb->panel);
}

static void mxsfb_pipe_disable(struct drm_simple_display_pipe *pipe)
{
struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
+ struct drm_device *drm = pipe->plane.dev;

drm_panel_disable(mxsfb->panel);
mxsfb_crtc_disable(mxsfb);
drm_panel_unprepare(mxsfb->panel);
+ pm_runtime_put_sync(drm->dev);
}

static void mxsfb_pipe_update(struct drm_simple_display_pipe *pipe,
struct drm_plane_state *plane_state)
{
--
2.17.1