Re: [PATCH v1] arm64: dts: sdm845: enable tsens thermal zones

[Amit Kucheria]

Andy,

Do you have any feedback for this patch?

Regards,
Amit

On Wed, Jul 18, 2018 at 1:19 PM, Amit Kucheria <amit.kucheria@xxxxxxxxxx> wrote:
> One thermal zone per cpu is defined
>
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 170 +++++++++++++++++++++++++++++++++++
>  1 file changed, 170 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 01ff146..a75be7c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -340,4 +340,174 @@
>                         };
>                 };
>         };
> +
> +       thermal-zones {
> +               cpu0-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 1>;
> +
> +                       trips {
> +                               cpu_alert0: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit0: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu1-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 2>;
> +
> +                       trips {
> +                               cpu_alert1: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit1: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu2-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 3>;
> +
> +                       trips {
> +                               cpu_alert2: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit2: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu3-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 4>;
> +
> +                       trips {
> +                               cpu_alert3: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit3: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu4-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 7>;
> +
> +                       trips {
> +                               cpu_alert4: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit4: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu5-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 8>;
> +
> +                       trips {
> +                               cpu_alert5: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit5: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu6-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 9>;
> +
> +                       trips {
> +                               cpu_alert6: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit6: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu7-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 10>;
> +
> +                       trips {
> +                               cpu_alert7: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit7: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +       };
>  };
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html