[PATCH 1/2] usb: mtu3: fix error of xhci port id when enable U3 dual role

[Chunfeng Yun]

If dual role mode is enabled, when switch u3port0 to device mode,
it will affect port id calculation of host(xHCI), specially when
host supports multi U2 ports or U3 ports, so need enable its dual
role mode, and fix it here.

Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
 drivers/usb/mtu3/mtu3_core.c    | 6 +++++-
 drivers/usb/mtu3/mtu3_hw_regs.h | 1 +
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index eecfd06..d045d84 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -107,8 +107,12 @@ static int mtu3_device_enable(struct mtu3 *mtu)
 		(SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN |
 		SSUSB_U2_PORT_HOST_SEL));
 
-	if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
+	if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG) {
 		mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+		if (mtu->is_u3_ip)
+			mtu3_setbits(ibase, SSUSB_U3_CTRL(0),
+				     SSUSB_U3_PORT_DUAL_MODE);
+	}
 
 	return ssusb_check_clocks(mtu->ssusb, check_clk);
 }
diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h
index 6ee3714..a45bb25 100644
--- a/drivers/usb/mtu3/mtu3_hw_regs.h
+++ b/drivers/usb/mtu3/mtu3_hw_regs.h
@@ -459,6 +459,7 @@
 
 /* U3D_SSUSB_U3_CTRL_0P */
 #define SSUSB_U3_PORT_SSP_SPEED	BIT(9)
+#define SSUSB_U3_PORT_DUAL_MODE	BIT(7)
 #define SSUSB_U3_PORT_HOST_SEL		BIT(2)
 #define SSUSB_U3_PORT_PDN		BIT(1)
 #define SSUSB_U3_PORT_DIS		BIT(0)
-- 
1.9.1