[PATCH v6 0/3] Add support rockchip RGB output interface
From: Sandy Huang
Date: Tue Aug 28 2018 - 22:39:25 EST
This patches add support rockchip RGB output, Some Rockchip CRTCs, like
rv1108 and px30 can directly output parallel and serial RGB data to panel
or to conversion chip.
So add a feature-bit for vops to mark the ability for these direct outputs
and add an internal encoder in that case, that can attach to bridge chips
or panels.
Heiko Stuebner (1):
drm/tockchip: add function to check if endpoint is a subdriver
Sandy Huang (2):
drm/rockchip: Add support for Rockchip Soc RGB output interface
drm/rockchip: Add directly output rgb feature for px30
drivers/gpu/drm/rockchip/Kconfig | 11 ++
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 29 +++++
drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 2 +
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 16 +++
drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 1 +
drivers/gpu/drm/rockchip/rockchip_rgb.c | 173 ++++++++++++++++++++++++++++
drivers/gpu/drm/rockchip/rockchip_rgb.h | 20 ++++
drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 2 +
9 files changed, 255 insertions(+)
create mode 100644 drivers/gpu/drm/rockchip/rockchip_rgb.c
create mode 100644 drivers/gpu/drm/rockchip/rockchip_rgb.h
--
2.7.4