[PATCH 16/21] staging:rtl8192u: Rename MPDUDensity - Style

[John Whitmore]

Rename the bitfield member 'MPDUDensity' to 'mpdu_density', this
clears the checkpatch issue with CamelCase naming.

This is a coding style change which should not have an impact on
runtime code execution.

Signed-off-by: John Whitmore <johnfwhitmore@xxxxxxxxx>
---
 drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h    |  2 +-
 .../staging/rtl8192u/ieee80211/rtl819x_HTProc.c    | 14 +++++++-------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
index 12db4ac9703b..9066f309bac9 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
@@ -56,7 +56,7 @@ struct ht_capability_ele {
 
 	//MAC HT parameters info
 	u8	max_rx_ampdu_factor:2;
-	u8	MPDUDensity:3;
+	u8	mpdu_density:3;
 	u8	Rsvd2:3;
 
 	//Supported MCS set
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 4fc919ebd10b..19c4903b572f 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -99,9 +99,9 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
 #endif
 	/*
 	 * 8190 only, Realtek proprietary aggregation mode
-	 * Set MPDUDensity=2,   1: Set MPDUDensity=2(32k)  for Realtek AP and set MPDUDensity=0(8k) for others
+	 * Set mpdu_density=2,   1: Set mpdu_density=2(32k)  for Realtek AP and set mpdu_density=0(8k) for others
 	 */
-	pHTInfo->bRegRT2RTAggregation = 1;//0: Set MPDUDensity=2,   1: Set MPDUDensity=2(32k)  for Realtek AP and set MPDUDensity=0(8k) for others
+	pHTInfo->bRegRT2RTAggregation = 1;//0: Set mpdu_density=2,   1: Set mpdu_density=2(32k)  for Realtek AP and set mpdu_density=0(8k) for others
 
 	// For Rx Reorder Control
 	pHTInfo->bRegRxReorderEnable = 1;
@@ -148,7 +148,7 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
 	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tMax AMSDU Size = %s\n", (pCapELE->max_amsdu_size) ? "3839" : "7935");
 	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupport CCK in 20/40 mode = %s\n", (pCapELE->dss_cck) ? "YES" : "NO");
 	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tMax AMPDU Factor = %d\n", pCapELE->max_rx_ampdu_factor);
-	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tMPDU Density = %d\n", pCapELE->MPDUDensity);
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tMPDU Density = %d\n", pCapELE->mpdu_density);
 	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tMCS Rate Set = [%x][%x][%x][%x][%x]\n", pCapELE->MCS[0],\
 				pCapELE->MCS[1], pCapELE->MCS[2], pCapELE->MCS[3], pCapELE->MCS[4]);
 }
@@ -570,11 +570,11 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
 	IEEE80211_DEBUG(IEEE80211_DL_HT, "TX HT cap/info ele BW=%d max_amsdu_size:%d dss_cck:%d\n", pCapELE->chl_width, pCapELE->max_amsdu_size, pCapELE->dss_cck);
 
 	if (IsEncrypt) {
-		pCapELE->MPDUDensity	= 7; // 8us
+		pCapELE->mpdu_density	= 7; // 8us
 		pCapELE->max_rx_ampdu_factor = 2; // 2 is for 32 K and 3 is 64K
 	} else {
 		pCapELE->max_rx_ampdu_factor = 3; // 2 is for 32 K and 3 is 64K
-		pCapELE->MPDUDensity	= 0; // no density
+		pCapELE->mpdu_density	= 0; // no density
 	}
 
 	//Supported MCS set
@@ -1005,10 +1005,10 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 	 * <2> Set AMPDU Minimum MPDU Start Spacing
 	 * 802.11n 3.0 section 9.7d.3
 	 */
-	if (pHTInfo->MPDU_Density > pPeerHTCap->MPDUDensity)
+	if (pHTInfo->MPDU_Density > pPeerHTCap->mpdu_density)
 		pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
 	else
-		pHTInfo->CurrentMPDUDensity = pPeerHTCap->MPDUDensity;
+		pHTInfo->CurrentMPDUDensity = pPeerHTCap->mpdu_density;
 	if (ieee->pairwise_key_type != KEY_TYPE_NA)
 		pHTInfo->CurrentMPDUDensity	= 7; // 8us
 	// Force TX AMSDU
-- 
2.18.0