Re: [PATCH v4 0/6] Add power domain driver for corners on msm8996/sdm845

[Rajendra Nayak]

On 6/27/2018 10:22 AM, Rajendra Nayak wrote:
> Changes in v4:
> * Included the patch to add qcom-opp bindings (dropped accidentally in v3)
> * merged the patches to add bindings for rpm and rpmh, added consumer binding example
> * Made the drivers built in, removed .remove
> * Added better description in changelog for PATCH 6/6
> * Updated rpmhpd_aggregate_corner() based on Davids feedback
> * rpmhpd_set_performance_state() returns max corner, in cases where its called
> with an INT_MAX
> * Dropped the patch to max vote on all corners at init, the patch did not
> work anyway, and it shouldn't be needed now

These patches have been out on the list for a while (8 weeks).
I haven't seen any further comments from anyone, except on PATCH 2/6
by Rob. I requested Rob to provide his Ack if he is fine with the bindings.

Can we plan to pull these in for 4.20?

> Changes in v3:
> * Bindings split into seperate patches
> * Bindings updated to remove duplicate OPP table phandles
> * DT headers defining macros for Power domain indexes and OPP levels
> * Optimisations to use rpmh_write_async() whereever applicable
> * Fixed up handling of ACTIVE_ONLY/WAKE_ONLY/SLEEP voting for RPMh
> * Fixed the vlvl to hlvl conversions in set_performance
> * Other minor fixes based on review of v2
> * TODO: This series does not handle the case where all VDD_MX votes
> should be higher than VDD_CX from APPs, as pointed out
> by David Collins in v2. This needs support at genpd to propogate performance
> state up the parents, if we model these as Parent/Child to handle the
> interdependency.
>
> Changes in v2:
> * added a power domain driver for sdm845 which supports communicating to RPMh
> * dropped the changes to sdhc driver to move over to using OPP
> as there is active discussion on using OPP as the interface vs
> handling all of it in clock drivers
> * Other minor binding updates based on review of v1
>
> With performance state support for genpd/OPP merged, this is an effort
> to model a power domain driver to communicate corner/level
> values for qualcomm platforms to RPM (Remote Power Manager) and RPMh.
>
> Rajendra Nayak (6):
>    dt-bindings: opp: Introduce qcom-opp bindings
>    dt-bindings: power: Add qcom rpm power domain driver bindings
>    soc: qcom: rpmpd: Add a Power domain driver to model corners
>    soc: qcom: rpmpd: Add support for get/set performance state
>    arm64: dts: msm8996: Add rpmpd device node
>    soc: qcom: rpmhpd: Add RPMh Power domain driver
>
>   .../devicetree/bindings/opp/qcom-opp.txt      |  25 ++
>   .../devicetree/bindings/power/qcom,rpmpd.txt  | 146 +++++++
>   arch/arm64/boot/dts/qcom/msm8996.dtsi         |  34 ++
>   drivers/soc/qcom/Kconfig                      |  18 +
>   drivers/soc/qcom/Makefile                     |   2 +
>   drivers/soc/qcom/rpmhpd.c                     | 406 ++++++++++++++++++
>   drivers/soc/qcom/rpmpd.c                      | 340 +++++++++++++++
>   include/dt-bindings/power/qcom-rpmpd.h        |  39 ++
>   8 files changed, 1010 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/opp/qcom-opp.txt
>   create mode 100644 Documentation/devicetree/bindings/power/qcom,rpmpd.txt
>   create mode 100644 drivers/soc/qcom/rpmhpd.c
>   create mode 100644 drivers/soc/qcom/rpmpd.c
>   create mode 100644 include/dt-bindings/power/qcom-rpmpd.h