Re: [PATCH v3 6/6] mmc: tmio: refactor CLK_CTL bit calculation
From: Ulf Hansson
Date: Thu Aug 30 2018 - 08:30:33 EST
On 23 August 2018 at 06:44, Masahiro Yamada
<yamada.masahiro@xxxxxxxxxxxxx> wrote:
> for (clk = 0x80000080; new_clock >= (clock << 1); clk >>= 1)
> clock <<= 1;
>
> ... is too tricky, hence I replaced with
>
> roundup_pow_of_two(divisor) >> 2
>
> '(clk >> 22) & 0x1' is the bit test for the 1/1 divisor, but
> it is not clear. 'divisor <= 1' is easier to understand.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
Applied for next, thanks!
Kind regards
Uffe
> ---
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/mmc/host/tmio_mmc.c | 18 +++++++++++++-----
> 1 file changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
> index b031a77..e04c322 100644
> --- a/drivers/mmc/host/tmio_mmc.c
> +++ b/drivers/mmc/host/tmio_mmc.c
> @@ -48,19 +48,27 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
> static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
> unsigned int new_clock)
> {
> - u32 clk = 0, clock;
> + unsigned int clock, divisor;
> + u32 clk = 0;
> + int clk_sel;
>
> if (new_clock == 0) {
> tmio_mmc_clk_stop(host);
> return;
> }
>
> - clock = host->mmc->f_min;
> + divisor = host->pdata->hclk / new_clock;
>
> - for (clk = 0x80000080; new_clock >= (clock << 1); clk >>= 1)
> - clock <<= 1;
> + if (divisor <= 1) {
> + clk_sel = 1;
> + clk = 0;
> + } else {
> + clk_sel = 0;
> + /* bit7 set: 1/512, ... bit0 set:1/4, all bits clear: 1/2 */
> + clk = roundup_pow_of_two(divisor) >> 2;
> + }
>
> - host->pdata->set_clk_div(host->pdev, (clk >> 22) & 1);
> + host->pdata->set_clk_div(host->pdev, clk_sel);
>
> sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
> sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
> --
> 2.7.4
>