[PATCH v1 3/4] ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+

[Dmitry Osipenko]

The external memory arbitration configuration is getting reset after
memory entering into self-refresh mode, it shall be restored on the
exit. Note that MC_EMEM_ARB_CFG register is shadowed and latching
happens on the EMC timing update. This fixes 2x GPU performance
degradation after resuming from LP1 on Tegra30.

Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 arch/arm/mach-tegra/iomap.h         |  9 +++++++++
 arch/arm/mach-tegra/sleep-tegra30.S | 21 +++++++++++++++++++++
 2 files changed, 30 insertions(+)

diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h
index 9e5b2f869fc8..9bc291e76887 100644
--- a/arch/arm/mach-tegra/iomap.h
+++ b/arch/arm/mach-tegra/iomap.h
@@ -79,15 +79,24 @@
 #define TEGRA_PMC_BASE			0x7000E400
 #define TEGRA_PMC_SIZE			SZ_256
 
+#define TEGRA_MC_BASE			0x7000F000
+#define TEGRA_MC_SIZE			SZ_1K
+
 #define TEGRA_EMC_BASE			0x7000F400
 #define TEGRA_EMC_SIZE			SZ_1K
 
+#define TEGRA114_MC_BASE		0x70019000
+#define TEGRA114_MC_SIZE		SZ_4K
+
 #define TEGRA_EMC0_BASE			0x7001A000
 #define TEGRA_EMC0_SIZE			SZ_2K
 
 #define TEGRA_EMC1_BASE			0x7001A800
 #define TEGRA_EMC1_SIZE			SZ_2K
 
+#define TEGRA124_MC_BASE		0x70019000
+#define TEGRA124_MC_SIZE		SZ_4K
+
 #define TEGRA124_EMC_BASE		0x7001B000
 #define TEGRA124_EMC_SIZE		SZ_2K
 
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 99ac9c6dcf7c..828f6c37afde 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -44,6 +44,8 @@
 #define EMC_XM2VTTGENPADCTRL		0x310
 #define EMC_XM2VTTGENPADCTRL2		0x314
 
+#define MC_EMEM_ARB_CFG			0x90
+
 #define PMC_CTRL			0x0
 #define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */
 
@@ -418,6 +420,22 @@ _pll_m_c_x_done:
 	movweq	r0, #:lower16:TEGRA124_EMC_BASE
 	movteq	r0, #:upper16:TEGRA124_EMC_BASE
 
+	cmp	r10, #TEGRA30
+	moveq	r2, #0x20
+	movweq	r4, #:lower16:TEGRA_MC_BASE
+	movteq	r4, #:upper16:TEGRA_MC_BASE
+	cmp	r10, #TEGRA114
+	moveq	r2, #0x34
+	movweq	r4, #:lower16:TEGRA114_MC_BASE
+	movteq	r4, #:upper16:TEGRA114_MC_BASE
+	cmp	r10, #TEGRA124
+	moveq	r2, #0x20
+	movweq	r4, #:lower16:TEGRA124_MC_BASE
+	movteq	r4, #:upper16:TEGRA124_MC_BASE
+
+	ldr	r1, [r5, r2]		@ restore MC_EMEM_ARB_CFG
+	str	r1, [r4, #MC_EMEM_ARB_CFG]
+
 exit_self_refresh:
 	ldr	r1, [r5, #0xC]		@ restore EMC_XM2VTTGENPADCTRL
 	str	r1, [r0, #EMC_XM2VTTGENPADCTRL]
@@ -546,6 +564,7 @@ tegra30_sdram_pad_address:
 	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
 	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
 	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+	.word	TEGRA_MC_BASE + MC_EMEM_ARB_CFG				@0x20
 tegra30_sdram_pad_address_end:
 
 tegra114_sdram_pad_address:
@@ -562,6 +581,7 @@ tegra114_sdram_pad_address:
 	.word	TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL			@0x28
 	.word	TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL			@0x2c
 	.word	TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2			@0x30
+	.word	TEGRA114_MC_BASE + MC_EMEM_ARB_CFG			@0x34
 tegra114_sdram_pad_adress_end:
 
 tegra124_sdram_pad_address:
@@ -573,6 +593,7 @@ tegra124_sdram_pad_address:
 	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
 	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
 	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+	.word	TEGRA124_MC_BASE + MC_EMEM_ARB_CFG			@0x20
 tegra124_sdram_pad_address_end:
 
 tegra30_sdram_pad_size:
-- 
2.18.0