[PATCH v5 7/7] MIPS: dts: mscc: enable i2c on ocelot_pcb123

[Alexandre Belloni]

Enable the i2c controller on ocelot PCB123. While there are no i2c devices
on the board itself, it can be used to control the SFP transceivers.

Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
---
 arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
index 2266027759f9..ef852f382da8 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
@@ -36,6 +36,12 @@
 	};
 };
 
+&i2c {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	status = "okay";
+};
+
 &mdio0 {
 	status = "okay";
 };
-- 
2.19.0.rc1